wen warm....

[carlos]

ive fitted me apexi ecu, done the usual in setting it up, now wen the engine is warm and no electrics on like heater, lights, a/c.... the revs flick from 900rpm to 1500rpm for around 1 to 2minutes. if ive got the lights on and heater on the revs set lower than 900rpm then pick up again, this only happens wen i stop at sum lights or roundabout, wot have i done....

[mikeeech]

what is "the usual" to set up an apexi ecu. Doesn\'t it need re-mapping?:confused:

[carlos]

brand new ecu, got told with my de cat , front pipe and induction kit, should run fine without being mapped.... plugged her in left the engine running 4 10mins, then went through all the electrics turning them on 4 10mins 1 after another

[bobster]

Am about to fit my PFC this evening. I have noticed on another car with a PFC that it hunts at idle like that.
We thought it was possibly down to a slight vac leak. The stock ECU is perhaps a tad more tolerant. But don\'t quote me.

The US forums talk about cutting some of the wires on the stock harness. I beleive that they wires have something to do with the Aircon system.
I am holding off to see if anyone knows what the wire cutting is all about

[Fish]

DO NOT CUT ANYTHING!!!!!!

There is no need to cut wires for the apexi to work properly. There is a setting that needs changing to sort out a bouncy idle.

And reguardless of what mods you have, you should always get it properly mapped.

Fish

[ScuttleRX]

Thought the girlfriend wouldn\'t let you have a new ecu http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/4/4_2_111.gif\' alt=\'Whip\' border=0>

[carlos]

the wife and she dont no!!!!!!!!!!!!!!!!!!!:D

[bobster]

Thats wierd..... my ECU won\'t let me get a new girlfriend:rollin