WGT trip

Started by peterwolds, August 29, 2006, 05:40:59 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

peterwolds

took RX to Pip today for remap was at 227.5 now running 287.5 at the wheels (339 flywheel) well pleased a return trip needed end of september as needs additional injectors fitting and wastegate cant cope even fully open with gases so safe set at .8 bar.nice bloke kept us informed all the way - day and a half next timealso do geometry for me.
Thanks PIP
:Typing Pete

shaunwil

Cool, good to see its made good power !

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

jurgen

nice one pip knows his stuff

Ricco_04

Excellant stuff :yes .  Good improvement too - what mods did you have it mapped for to make the difference?  What injectors do you have now and what setup do you think you\'ll use?

Pip is a gent - kept popping out to let me know what was going on every step of the way :cheers

oddball

Nice numbers there pete.  What did Pip think of the i.c.?
oddball

peterwolds

#5
Quote from: shaunwilCool, good to see its made good power !

Shaun
Shaun real happy wanted better than my EVO ran and got it
:Typing Pete

peterwolds

Quote from: Ricco_04Excellant stuff :yes .  Good improvement too - what mods did you have it mapped for to make the difference?  What injectors do you have now and what setup do you think you\'ll use?

Pip is a gent - kept popping out to let me know what was going on every step of the way :cheers

since last map before i got it twin induction,XS IC and exhaust no cat and boost controller  - injectors Pip hopefully by end of september will have additonal 550 add on kit they are working on just coping with fueling now current is standard 550/850\'s boy am i pleased with results - yes a gent :InLove  cars runing well recommend WGT
:Typing Pete

peterwolds

Quote from: oddballNice numbers there pete.  What did Pip think of the i.c.?
not wild about it
:Typing Pete

Ricco_04

Quote from: peterwoldssince last map before i got it twin induction,XS IC and exhaust no cat and boost controller  - injectors Pip hopefully by end of september will have additonal 550 add on kit they are working on just coping with fueling now current is standard 550/850\'s boy am i pleased with results - yes a gent :InLove  cars runing well recommend WGT

Cool so your going for extra injectors.  Pip was telling me about that kit he was doing but unfortunately had nothing at the time to be able to show me.  

Hope you dont mind but if you could post up when you have had the fuel mod and what you think of it I would be really greatfull (and piccies of course :D)

peterwolds

Quote from: Ricco_04Cool so your going for extra injectors.  Pip was telling me about that kit he was doing but unfortunately had nothing at the time to be able to show me.  

Hope you dont mind but if you could post up when you have had the fuel mod and what you think of it I would be really greatfull (and piccies of course :D)
no problem will be happy to let you know results got to ring Pip end september when kits ready ,car (and me legimately  ;)  )having to lose its virginity 10th september and do a RWYB run
:Typing Pete

peterwolds

Quote from: jurgennice one pip knows his stuff
sure does nice to see someone running round a  rotary engine with confidence
:Typing Pete

Ricco_04

Quote from: peterwoldsno problem will be happy to let you know results got to ring Pip end september when kits ready ,car (and me legimately  ;)  )having to lose its virginity 10th september and do a RWYB run

Thank you very much for that! :Thumbs-up

Where you going for your first RWYB? (good luck with it :) )

peterwolds

Quote from: Ricco_04Thank you very much for that! :Thumbs-up

Where you going for your first RWYB? (good luck with it :) )
Cheers hope weather dry,its at elvington
:Typing Pete