Fuel Mixture adjustment /MOT

Started by Andy T, March 03, 2006, 07:21:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Andy T

Hi,

Can someone let me know what I can do with the Apexi PFC to lower my emissions a tad before the car goes for an MOT.... I am just a little wary about the emissions as a beleive most of the FD run border line with the emissions

Thanks

Andy

maximtaylor

Main menu - settings - IGL/T,Fi.

You\'ll now be in a screen with "IGL   IGT    Inj Adj" across the top.

Go to the top box on the right, under Inj Adj where there is 1.000

This will trim down your overall fuelling, so to take out 5% reduce it to 0.95 using the down arrow.

When you turn ignition off then on again, it will reset to 1.000 as before.

Don\'t try driving with it leaned out, only do this for the emissions check.

If you still have a/c, turn it on - it helps sometimes.