really need help now!!

[rmagictastic]

i need to know how to wire my after market tacho, all the normal lighting and power wires im fine with, but where do i connect the green sensing wire?


someone must have done it?

ta

nick

[thebandit]

Nick,you need to connect it to the Tacho output signal wire or the ignition coil (-) signal wire on your main wiring harness. check out //www.iluvmyrx7.com for manual download to locate these wires

Hope that helps

[rmagictastic]

Nick,you need to connect it to the Tacho output signal wire or the ignition coil (-) signal wire on your main wiring harness. check out //www.iluvmyrx7.com for manual download to locate these wires

Hope that helps

havent i got three coils??
cheers

N

[thebandit]

nick, best thing would be too look on //www.iluvmyrx7.com to find which wire on the block that connects into your ecu is the rpm signal wire then take a feed off it

[thebandit]

if you look at this nick it will give you the wire locations your after in the wiring section (scroll down)

http://www.apexi-usa.com/pdfInstallation/14.pdf

[rmagictastic]

you are the man!!!!!

cool cheers mate


n

[thebandit]

No problem buddy