Whats a safe air temp reading on PFC ??

Started by shaunwil, May 01, 2005, 03:37:13 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

gsb876

#15
May 02, 2005, 05:43:30 PM
C-WEST front nose Shaun :)
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

20B_boy

#16
May 02, 2005, 05:53:20 PM
There are plenty of people with stock noses not having issues with big intercoolers. See if the ducting/scoop is doing as it should.

Might be useful to compare peoples water and intake temps with front mounts and bigger stock mount intercoolers. Been done before I know but as we have larger numbers here...
R.

shaunwil

#17
May 02, 2005, 06:45:20 PM
Cheers guys ! Im more worried about it running too high on the rollers ! Im going to try a different route for the turbo side of the intercooler. Got some spare bends and tube so not a big job ! See if i can get the upper filter lower down and into the air flow !

I need to take off the air pump (have it unplugged at the min). Do i need a underdrive pulley kit to remove the air pump or can i just remove it and replace the belt ?

Cheers :)

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving
Print
Go Up Pages 1 2
User actions