which brakes pads are the best

Started by hotstepper1973, October 22, 2004, 10:07:53 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

hotstepper1973

i need advice on which brake pads to go for i use to us ebc on my turbo 2 and they were great so i bought ebc for 3rd gen they warped my disks so then i tried fredo they are ok but not to good for track and i need some pads that can take the heat.
You only get one life live it

Steve Burnett


J4P RX

http://www.mazdarotaryclub.com/forums/showthread.php?s=&threadid=6577

For what its worth im not that keen on the Black Diamonds.  They are fine for road use and dont make any noise or anything, but taking them on track I just didnt feel like the car was going to stop.  Was pretty under hard braking though, probably 160+.

Mazdarotaryparts

QuoteOriginally posted by hotstepper1973
i need advice on which brake pads to go for i use to us ebc on my turbo 2 and they were great so i bought ebc for 3rd gen they warped my disks so then i tried fredo they are ok but not to good for track and i need some pads that can take the heat.

Hiya,

Sounds like you need a set of Hawk HT10\'s in the front also a  set  of HP+  in the back would help keep your brake balance and also improve your braking performance overall.

Hawk HT10  / front £129+ VAT

Hawk HP+ / rear £42.74 + VAT

Hope this helps

All the best Clive
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

iaint

QuoteOriginally posted by ShyAuto.com
Hiya,

Sounds like you need a set of Hawk HT10\'s in the front also a  set  of HP+  in the back would help keep your brake balance and also improve your braking performance overall.

Hawk HT10  / front £129+ VAT

Hawk HP+ / rear £42.74 + VAT

Hope this helps

All the best Clive

This is what I\'m running plus black diamond slotted + drilled discs at the front.  They\'re awesom.  Better than stock setup from cold and so much better when hot!  

They\'re a tad noisier then stock pads - occasional squeal and a bit more nosiy under use but the feel on the peddle is better.

Stood up really well to the track session at trax.

Well worth the investment.  Had a drive in a stock FD recently and it was scary how the breaks feel in comparison.

Iain

"The way to do is to be." - Lao Tzu

Ed_RX7

I agree got the same setup on my single but with standard discs all round.......and boy do they bite!!!!
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of