Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Kevin

#1
Good job on the interior strip and paint.  My only comment would be put the head liner back, otherwise come winter / colder weather the condensation from the roof will drip all over than nice interior.
#2
Cars for Sale / fd 2001 spec single turbo
July 06, 2014, 09:57:53 PM
I beg to differ... low mileage, late model with big spec easily worth the money he\'s asking.

Colour maybe the only issue when looking for a sale.

Good luck with the sale.
#3
3rd generation RX-7's / EP Racing
May 05, 2014, 07:54:19 PM
I have a set of GENUINE origin labs front fenders like the ones pictured in the ep racing picture.  They were fitted to one of my FD\'s but never painted.

If your interested email me kevin.lockley (at) flemingsmith (dot) co (dot) uk

cheers.
#4
3rd generation RX-7's / RX7 needed for TV show
March 18, 2014, 05:22:16 PM
As much as I like Wheeler Dealers I\'m pretty disappointed that they\'ve opted to use the RX7 in their show, and after seeing the photo in the above post even more so, seems to be more fitting on the front page of Max Power or Fast Car.  Would of appreciated if they could have done what they did to the MK3 Range Rover and taken a dog and made it remotely classy.... not the other way round.

Only just my moany opinion though.
#5
What exactly is it hitting?  Arch liner?
#6
3rd generation RX-7's / What\'s it worth
November 01, 2013, 04:36:01 PM
I think aftermarket extra\'s is a bit of a grey area with insurance as they would always been a sticking point if a case ever arose whereby you had to claim.

I think in general however as yours is of a 2000+ generation you would be looking at 5-7k sourcing a decent spec one in Japan and thereby increasing the cost of O.T.R. over here (duty, vat, shipping etc).

If it was me I would value my car of minimum £12K.  Therefore I don\'t think your original figure of £13k is too bad, providing insurance accept value?
#7
3rd generation RX-7's / My Pet Project
July 29, 2013, 09:54:55 AM
Superb.  Loving the wheel and tyre combo!
#8
3rd generation RX-7's / My car featured on PH
July 26, 2013, 03:01:10 PM
...They did however get one thing right.  The car in standard unmodified form is still one of the best looking designs ever to roll out of a showroom.  Makes you question sometimes why we spend thousands on modifying... (only for a second thou!)

Nice car btw.
#9
3rd generation RX-7's / My Pet Project
July 24, 2013, 09:09:19 PM
Under normal conditions you would end up with the original plate back on the car, but in this instance I would be more inclined to bet money that they would pick up on this error and return the car to a \'K\'? plate.

If you intend to keep the car for a long time I\'d put a private plate on, if not I\'d keep it as is for it\'s quirky factor.
#10
Items For Sale / Aftermarket Items
July 24, 2013, 03:18:08 PM
Bump.  Updated and all prices now include P&P (within the UK).

 1.) Blitz Duel Solenoid Boost Controller. Early model removed from single turbo FD. Great boost controller comes with all harnesses, solenoids etc.
£125.00

 2.) Blitz MSTT multi speed turbo timer. Early model removed from single turbo FD. Comes with all harnesses etc.
£50.00

 3.) Pivot Head Light Retractor. Controls level of head light through a variable gain knob. Removed from FD3S.
£50.00

 4.) Sparco 326 Suede Steering Wheel with 60mm Quick Release Hub and steering wheel suede protector cover. New never used. However hub and quick release has already been wired up for horn for plug and play installation. (Will require you to have your own boss adapter for quick release to plug into). SOLD

 5.) Ganador Mirrors (electric blue tint version). Bought from Martin @ Speedline last year but never used. They used to be carbon effect however this has faded over time and would require to be rubbed down. Driver\'s mirror glass film slightly deteriorating but i\'m just being pedantic, reflected in cheap price. SOLD


 6.) Flat carbon fibre door cards. Custom made carbon panel door cards with angle return above door (originally sourced by blitzboy marc). Holes already pre-cut for plug and play installation along with electric window controller already installed. In two minds to sell these at the moment as they are fantastic. SOLD

 7.) Mazdaspeed AST - Bought from Martin @ Speedline last year but never used. Pressure cap used to read mazdaspeed however it could do with a new pressure cap to ensure a tight seal. Hence price - £45.00

 8.) Greddy/Trust Heavyweight Shift Knob - Removed from FD3S direct OEM replacement, screw on. As new condition. £25.00
#11
3rd generation RX-7's / My Pet Project
July 24, 2013, 03:14:46 PM
You have made some welcome changes to the body there! Well done!

As for 53 reg it\'s not often they :censored::censored::censored::censored: up but they have done on one or two of my cars in the past.  It\'s totally legit and it can\'t be changed so just enjoy the unique fact, then add additional on the sale price! :D

Good job on the car, keep it up pal!
#12
Items For Sale / RE-Amemiya Aero Parts
July 16, 2013, 06:29:42 PM
Pleasure mate.   Let me know how you get on.
#13
3rd generation RX-7's / My very long term project
July 10, 2013, 01:32:37 PM
Wheels look great mate.  Kind of miss them seeing them refurbished like that!
#14
Items For Sale / RE-Amemiya Aero Parts
July 10, 2013, 12:01:57 PM
Quote from: Wo:Deep;860672already sold or still for sale?

Hi this kit is provisionally sold to ANERX7 pending collection.
#15
Items For Sale / Aftermarket Items
July 08, 2013, 01:19:20 PM
Update & added:

 (Prices do not include postage, which is additional and variable dependant on shipping address.)

 1.) Blitz Duel Solenoid Boost Controller. Early model removed from single turbo FD. Great boost controller comes with all harnesses, solenoids etc.
£125.00

 2.) Blitz MSTT multi speed turbo timer. Early model removed from single turbo FD. Comes with all harnesses etc.
£50.00

 3.) Pivot Head Light Retractor. Controls level of head light through a variable gain knob. Removed from FD3S.
£50.00

 4.) Sparco 326 Suede Steering Wheel with 60mm Quick Release Hub and steering wheel suede protector cover. New never used. However hub and quick release has already been wired up for horn for plug and play installation. (Will require you to have your own boss adapter for quick release to plug into).
£200.00

 5.) Ganador Mirrors (electric blue tint version). Bought from Martin @ Speedline last year but never used. They used to be carbon effect however this has faded over time and would require to be rubbed down. Driver\'s mirror glass film slightly deteriorating but i\'m just being pedantic, reflected in cheap price.
SOLD TO SHAHID

 6.) Flat carbon fibre door cards. Custom made carbon panel door cards with angle return above door (originally sourced by blitzboy marc). Holes already pre-cut for plug and play installation along with electric window controller already installed. In two minds to sell these at the moment as they are fantastic.
PROVISIONALLY SOLD

7.) Mazdaspeed AST - Bought from Martin @ Speedline last year but never used.  Pressure cap used to read mazdaspeed however it could do with a new pressure cap to ensure a tight seal.  Hence price - £45.00

8.) Greddy/Trust Heavyweight Shift Knob - Removed from FD3S direct OEM replacement, screw on.  As new condition. £25.00