Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - aaron_rx7

#1
Before
[/IMG]

After
[/IMG]
#2
So im thinking roll the arches and run 9.5" et35 with 225\'s on the front and on the rear 10" 235\'s et20... How does this sound??
#3
Im after the tyres to fill the arches but obviously not catch, just a cool aggressive look? what offset and width do i need?
#4
Hi ive decided to change my rims after seeing a picture of on fd on rota grids. My wheels at the moment are 8.5" wide, 18", running 225\'s on the front and 255\'s on the rear, the car is on hks coilovers and has plenty of clearance in the arches.

I\'ve emailed rare rim\'s they\'ve said 18x10 ET35 rear and 18x8.5 ET35 front will fit fine.

This car is running 18x9.5in et30 (front) 18x10in ET15 on the rear



And this car is running 18×9.5″ +38 front, +20 rear


And this is my rx7


Also help with colours of the new rims would be appreciated, im thinking a dark anthracite? but in the future may get them re-sprayed pink and remove the spoiler to make the car look a bit jap loon!

Thanks
#5
sorry yes it is a fd forgot to mention that!

Yes it does have 2 oil coolers so must be a type r
#6
There is a sticker there but its all in Japanese!
#7
hi, Tried to insure the rx7 but the reg came up with a mazda 323.
So i went through it all manually but don\'t know what type the car is, can anyone help?
#8
General Technical / 2nd turbo not boosting??
August 03, 2010, 09:00:08 AM
Hi, i have a 92 fd which i brought cheap as it was flooded, the had been to a three garages and none of them could get it running. After reading the un-flooding procedure on here the car was running the same day!
The car has been off the road for about 2 1/2 years and have now changed all the fluids and got all the missing parts back on it, the car runs fine except the 2nd turbo is not boosting, have checked the turbo\'s both are good and both actuators are working... Any ideas appreciated?