Messages

Hi,

I use the Apexi PS Revolution Catback exhaust system but have some trouble with it. When i lift my foot from the gas pedal and the rpm drops significantly my exhaust starts to make a loud "bang" noise. Did someone experience the same? Maybe the active silencer inside does not open and close as smooth as is should. I know there came a tool with the catback to adjust the spring pressure of the silencer, but i don't have it. Any recommendations?

best,
ica

anybody? need help

hi, maybe you read my last thread, maybe not. my drive belt broke and ripped out the wiring from the omp. now i have trouble reassambling them, because on the 10pin connector B1-40 for the oil metering pump (omp), the color dont match on both sides. Since the 6 cables coming from the 6 pin connector of the omp are ripped out too, i need someone with an mikuni omp too look for the following:

- i need the pin configuration (wire color + position) of each wire on the 6 pin connector
- i need the pin configuration (wire color + position) of each wire on the 10 pin connector (one empty pin there)

if you tell me the configuration please mention where the top position of the connector is (nose) and from what side you\'re looking at.

i need this info URGENT, my car is at mazda an they can\'t repair it because they dont have access to the 99+ wiring diagram.

thanks in advance.

Anybody? i really need help with this.
for better comprehension i painted the following picture. What i need is to know if theres anything i am missing in my wiring (the big ?)  and if not what the pin configurations of the 3, 6 and 10 pin connector are.  even if your wiring colors dont match mine, i could resemble mine because i would know from where to where each wire goes (for example 3pin connector: left top to 10pin connector bottom right)

i just had a look at my car and the connectors. the cables were ripped out of the metering oil pump connector (B1-40). the problem is the outgoing color codes in the manual match the colors of the cables that are in my car, but the incoming cables dont. B1-40 is a 10 pin connector with one empty pin, so 9 cables are coming in. i have 9, 3 directly out of the engine (blue, black, yellow) an 6 coming from another connector (blue, red/white, black, yellow, white, red) next to them. can you identify these cables? Outgoing colors are as stated in the manual: brown/white, green/black, brown/black, black/orange, blck/blue, white/black, white/black, black/light green, black/yellow.

Since the colors dont match, im not sure where to put them. i need the pin configuration of the 6pin connector and the 3 pin connector (in case there is one) of the 3 cables.

93 rx7 is different :/. but tanks

Hi,

my car is at the local mazda shop because my drive belt blew up and damaged the cables and connectors of the oil pressure pump and the oil pressure control. My car is a jdm rhd and i need a wiring diagram of a rhd car for those 2 connectors to get them repaired properly. my mazda shop doesnt have access to the wiring diagram. btw my car is a rhd 1999 jdm version. i would be happy to get ANY help. thanks!

nobody?? come on

Hi,

i\'m wondering how well this diffuser fits compared to the shine auto one. Its available on ebay: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=360386933046&ssPageName=STRK:MEWAX:IT
or on the aerokit website. Wolfie1 stated that theres a gap on the left side, but i know the shine auto one also has a small gap there. Im very interested to see how "bad" this gap is and would like to get some information of the quality of this part. It would be way cheaper than importing a Shine Auto one or even a real RE-Amemiya.

thanks in advance,
Ica

@Wolfie: Do you know what the fitment of your street style diffuser is compared to the shine auto version? I know the shine one fits better than the real re-a one, but also has a small gap on the left side. What\'s the overall quality of your diffuser? Could you please take some more pics (also some of the gap)? I wanted to import a shine one, but shipping is 480$. that sucks ...

could you send me one anyway pls? i think this would help! I\'m happy about everything i can get!

i saw a 2001 fd in the uk once, so it\'s possible. i knew what i did when i imported mine, and i don\'t have a problem with paying for the TUV, but i would just help alot if i find someone ...

Hi,

i bought a 1999FD and could really need any copy of a 1999-2002 fd  license. You can black out your name, address and so on, your location  within europe also doesn\'t matter. This would be really helpful to  legalize my one.

thanks and greetings
ica