Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: fly on October 12, 2004, 06:26:40 PM

Title: What kind of damage have i done?
Post by: fly on October 12, 2004, 06:26:40 PM
A few months ago while i had a big crack in my rad i the (standard) temp gauge went upto max and stayed there for about 25 seconds before i could pull over (this was because i was on the inside lane of hammersmith roundabout:( ), is it likely that i did massive damage, as some people seem to think this is the case.

My car is currently having a new front wing fitted after the hgv incident but before i get the car back i was wondering if i did much damage, the engine seems fine but im paranoid that this one overheating incident could have eaten my engine:confused:


I have no luck with cars!:mad:
Title: What kind of damage have i done?
Post by: yonner on October 12, 2004, 07:11:46 PM
nah if its runs fine it should be ok. get a compresion test adn that will show up any warpage
Title: What kind of damage have i done?
Post by: bnaellis on October 12, 2004, 07:41:37 PM
side plate will have warpage and over a period of time it will.

rgds
Title: What kind of damage have i done?
Post by: gsb876 on October 12, 2004, 10:54:02 PM
Sometimes you get lucky but as Brian say the theory most likely is it will be fine for a few months and then possible symptons will begin for a rebuild.

This is why a Power FC is important on these cars, the power FC would have shown you temp rise straight away as the "stock" temp gauge only moves when the water temp is already too high.:(
Title: What kind of damage have i done?
Post by: yonner on October 12, 2004, 11:25:01 PM
can u use a guage with the pfc insted of the comander??? it would be good to have an actualy temp guage on the dash runnign from the pfc?
Title: What kind of damage have i done?
Post by: gsb876 on October 12, 2004, 11:31:10 PM
The power FC tells you the water temp???

If you mount it correcty very visible, but i guess if need be then you can mount another tem gauge??
Title: What kind of damage have i done?
Post by: fly on October 13, 2004, 12:02:36 AM
Gutting!:(


Spent enough money on the car without another 3 grand of bills.

BNA_ELLIS: over a period of time it will.



will what m8?:confused:
Title: What kind of damage have i done?
Post by: fly on October 13, 2004, 12:08:55 AM
Unfortunately it was a case of not being able to get hold of a new rad for 2 weeks, bloody useless rotary specialists!

I wanted an alu rad from dragon anyway but ross was away in japan at that time:(
Title: What kind of damage have i done?
Post by: mattmaclennan on October 13, 2004, 12:21:26 AM
cheer up fly, don\'t listen to brian... It\'ll all be fine... When you get a new rad, be sure to change the pressure cap, they\'re crap.
Title: What kind of damage have i done?
Post by: bnaellis on October 13, 2004, 07:26:10 AM
QuoteOriginally posted by mattmaclennan
cheer up fly, don\'t listen to brian... It\'ll all be fine... When you get a new rad, be sure to change the pressure cap, they\'re crap.

Shame on you rotary specialists and all. I\'m telling your manager about this tut tut:D
Fly you may not see any symptoms for 10,000 or maybe more miles but those side plates will not be exactly the same as they were before.

rgds
Text only | Text with Images