Just started doing some repairs on my rx8 spotted a couple rust spots on rh wheel arch one part turned out have more tin worm then I thought had to cut rust out and make new parts to put in.(https://uploads.tapatalk-cdn.com/20170902/37d73a14c41f1013f29245d835a18083.jpg)(https://uploads.tapatalk-cdn.com/20170902/380022d7ad79180f2d11f749552477b1.jpg)(https://uploads.tapatalk-cdn.com/20170902/18f3c4a09153e3d696384c9e7e0dca64.jpg)(https://uploads.tapatalk-cdn.com/20170902/0fcf592e61c86b6759b64249d390fc76.jpg)(https://uploads.tapatalk-cdn.com/20170902/95e52b735b95e0bbe17d5d24957fe35d.jpg)(https://uploads.tapatalk-cdn.com/20170902/5e3fdc106a372f5592d77d6390ab4ccb.jpg)(https://uploads.tapatalk-cdn.com/20170902/ffa7f0380f7dc2cbcd034306bcbcaba3.jpg)(https://uploads.tapatalk-cdn.com/20170902/9865324d0f7daa5bbeedc4e161069738.jpg)(https://uploads.tapatalk-cdn.com/20170902/0bdc0dbb4cd605b16c0839d8b32dadd6.jpg)(https://uploads.tapatalk-cdn.com/20170902/23b8d34a8b6ebacc6754a6d59b0df6f4.jpg)
Sent from my PLUS using Tapatalk
:13: Interested to see the final result - are you spraying it yourself?
Yes I am hope paint is good match
Sent from my PLUS using Tapatalk
Hi
Mine has rusted in the same places. I had the lower wheel arch inner cut out to put a new piece of metal in...that exposed the inner sill that was pretty non existent in that area. Had to cut out the outer sill to gain enough access to repair the inner sill, which needed part of the floor in that area cutting out and new metal adding.
Might be worth checking your inner sill before its all welding up.