Mazda Rotary Club

Items For Sale & Wanted => Items For Sale => Topic started by: rx7ali on August 16, 2015, 10:21:10 PM

Title: Fd3s parts galore
Post by: rx7ali on August 16, 2015, 10:21:10 PM
---No silly offers as Im not rushing to sell anything
---I may have other bits kicking about so just ask
---All prices are collected or plus postage.
---Can't be assed to post anything big but will at a push.
---pictures upon request

SOLD- Sealed block low compression on the rear housing (no sign of housing or rotor damage through the exhaust post but unknown condition £400 for bare block OR £600 including UIM,LIM, Flywheel, blanking plates (used for single conversion and imp removal), alternator, water housing and ast removal neck.

SOLD - Complete engine, known good order as its in bits and was going to be my go to engine for a rebuild. It was a water seal failure and DOES NOT have corroded housing, was likely a pinched band. Either way it's in great nick, housings have minor wear all within mazda limits for a rebuild. £700

Atkins master rebuild kitt minus apex seals and oil filter. £700

Als unbreakable apex seals £300

Other spares including Oem irons, e-shaft, sump, wiring, manifolds, etc, etc just ask.

ACT paddle clutch, sprung type. £350

Coil packs on a diy mounting plate (ac pump location) £25

Spare OEM flywheel £50

Bosch 1680cc injectors, Indy blues with collars. They were cleaned and flow tested around 1000 miles ago. £150

billet bits fuel rail to match above injectors £80

Primary fuel rail with 550's as above cleaned and flow tested around 1000 miles ago. £50

Freddy inlet elbow (fake gready) £50

Dm Motorsport idler pulley £75

Low milage stock gearbox, perfect working order, will include short shifter and dm Motorsport brass shift collar. £200

Apexi PFC, 8 bit to suite 1992 fd. £500

Vmount.. Home made... functional. Including pipe work for £350 Will include the vented bonnet and fans with extended cables for a mere £50 more :-)

Kv85 ht leads £25

Oils sandwich plates £20 each (dm sport and gtrex? One. Dm hips missing the rubber seal.
Title: Re: Fd3s parts galore
Post by: Joeh on August 17, 2015, 07:39:33 AM
Dropped you an email regarding the vmount and other bits, dibs on them, please send images to joeh@ogsmechanics.com or to my mobile 07944945944

Thanks
Joe
Title: Re: Fd3s parts galore
Post by: rx7ali on August 17, 2015, 08:03:44 AM
Replied :-)
Title: Re: Fd3s parts galore
Post by: rx7ali on August 18, 2015, 09:02:50 AM
Rebuild kit and ALS seals are now sold

Title: Re: Fd3s parts galore
Post by: rx7ali on August 20, 2015, 08:53:48 PM
Evening bumps :-)
Title: Re: Fd3s parts galore
Post by: rx7ali on August 22, 2015, 08:20:50 AM
Weekend bump
Title: Re: Fd3s parts galore
Post by: rx7ali on August 30, 2015, 09:15:00 AM
Injectors, rail, throttle and elbow all collected
Title: Re: Fd3s parts galore
Post by: rx7ali on August 30, 2015, 09:16:24 AM
Clutch reduced to £250 as need of resurface for which I have been quoted £45+postage