Mazda Rotary Club

THANKS FOR LOOKING AT THIS THREAD BUILD



The car is 2006 project build and at the moment in time will look a little odd as I will be infilling with photo,s shortly so please be patient and will be very pic heavy this is why I am starting with this modification list first this is the UP TODATE version as at 20th sept 2016  and will not to be too everyones taste but I like it.  And please do not Ask how much its cost as most of its been down to time as well as money but I stopped counting years ago !!!

So I am going to do this thread in Parts :-

Under the bonnet looks and what I got
Engine Build
Cabin space
Boot Build
Wheels and Under ~Tray
Gadgets And Useful Bits TPMS & why I fitted it
Roof Carbon fibre Effect
Tow Hitch
3M Clear Protective Film
HKS CAMPII, HKS FCON (IS) ECU
ATH front BUMPER BUILD
REAR END BUILD
Making Your OWN Under Tray




Also some links to sites will follow I.E for the Interior build, water jetting,wicked coatings, etc etc


THIS IS THE START OF MY 10 YEAR PROJECT WAS 2 ORANGE STRIP,S  FROM THIS :-


(http://i1174.photobucket.com/albums/r616/exiledviking1/12321479_132539330445603_6899027015996608781_n_zpsjgnzt3x3.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/12321479_132539330445603_6899027015996608781_n_zpsjgnzt3x3.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/2016%20engine%20bay%20look/IMG_7912_zpshdicczp4.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/2016%20engine%20bay%20look/IMG_7912_zpshdicczp4.jpg.html)



Some of you will have seen this on other sites how ever these photo.s WILL BE FROM 2016  AND ONLY BEING PUT ON 3 SITES IT IS FOR THE UP TO DATE 10 YEAR PROJECT



1/  THIS IS AN UP DATE IN FULL AS AT 20th Sept 2016  About the car



This system is a FCON/( IS) ECU THAT RUNS THE FULL fuel and ENGINE management system
HKS fcon/ IS, ENGINE MANAGEMENT SYSTEM now has been fully installed by TDI LONDON

The HKS FCON (is), has been selected as the choice of aftermarket ECU’s for the management of fuel and ignition timing for this application because it is comes with a high quality harness to make connectivity a simple operation, and it's level of quality and functionality is extremely high.

The main features of the FCON (is) :result of methodical testing it has been concluded that the HKS FCON (,is) is a cost effective optimum installation enhanced upgrade solution on the Mazda RX8. (AT that TIME)

Full figures and mapping results will become available ( these were posted 2010 after new engine installed )the figures from a before HKS was fitted just the supercharger engine and remap (of  six independent tests) and the after figures that TDI has done with the new HKS system fitted the rest of the cars systems is still dealt with the cars original ECU there is quite a remarkable difference.

fuel economy UP in all areas

local and town driving is up to 24.6mpg (tested 2010/2011 ) new engine fitted

motorway/long runs 33.7  mpg (tested 2012 ) new engine fitted THIS ENGINE HAS RUN 49,300 MILES BEFORE TAKEN OUT AND REPLACE WITH THE ENGINE BELOW STILL RUNNING IN THE MID 7S AND AT 354 BHP


   ************NEW STREET-PORTED PETTIT~SUPERCHARGED 13B POWER~GAINS MOTORSPORT BUILD ENGINE FITTED 20 JAN 2015  with light weight fly wheel and clutch MPG N.K.A.Y  Figures to Follow*********

Updated Figs for you as at March 2016 BHP 370+   porting and other engine periphery  Mods gave us an extra 16 to 18 BHP

A 25% faster processing speed HKS ECU IS THE FIRST PROCESSOR Mazda ECU runs the rest
Built in video output function to monitor engine parameters
Plug and Play harness which makes the connectivity very easy:  or record to a logger or computer


TO THIS  TO THIS IN 10 YEARS  ( With the help of Clive MRC/MRP )

(http://i1174.photobucket.com/albums/r616/exiledviking1/Shows%20and%20stuff/IMG_8091_zpskzel2fgy.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Shows%20and%20stuff/IMG_8091_zpskzel2fgy.jpg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5038_2_zps67bd7f76.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5038_2_zps67bd7f76.jpg.html)






Modifications  AS FOLLOWS In NO Particular Order

Interior

Custom leather pack :- DONE BY STEVE AND HIS TEAM AT classic car services

seats carbon fibre/burnt orange double cross stitched
centre trim carbon fibre

CONSOLE CARBON FIBRE EFFECT BY WICKED COATINGS
Burnt orange leather trim car mats with Rx~8 logo

Alcantara roof lining in black

Seat belt shoulder pad with Rx8 logo x 4

Steering wheel re leather carbon fibre effect and burnt orange with anti sweat grip

Gear leaver gaiter

Carbon fibre lathered door sills

Door trim carbon fibre/burnt orange


INTERIOR PHOTOS TO FOLLOW


Carbon fibre door handle inserts , carbon fibre effect switch panels, carbon fibre centre panel

Glove box trim diamond cross stitched with two leather cases for computer and accessories 3 port usb 12volt adaptors with integrated mobile phone, and computer charger/I PAD MINI



Front   camera monitor with SDHC recording facility in mirror

Rear.  Camera monitor with SDHC recording facility in mirror audible  reverse warning

Sun visor drivers and passengers CD mp3/mp4 SDHC game DVD jpeg etc etc 7 inch monitors
240 volt /12volt inverter

Fire extinguisher x 2

Road angel GEM
Parrot blue tooth/mp3 bluetooth
Laser radar detector
Mazdaspeed  start button
Elect sun roof
Petit Radio Knob
Amber interior lighting
Bose hd mini disc player/
MP3 SONY/APPLE CONNECTION **** up grade 2012
Garmin sat nav (as well as integrated Mazda sat nav)
Racing beat 3 dial warning gauge water,oil temp, oil pressure
pillar mounted VOLT METER***** now replaced by twin vent mounted pod gauge kit ***** COVERD IN ALCANTARA BLACK FABRIC 
pillar mounted WATER temp METER FOR SUPERCHARGER ***now replaced by twin vent mounted pod gauge kit ***COVERD IN BLACK ALCANTARA FABRIC
Front hide away number plate with remote (steering wheel mod fixing in the remote buttons to operate the motorised flip number plate)
Rear motorised  number plate curtain black out with remote ***** 2012


(http://i1174.photobucket.com/albums/r616/exiledviking1/2016%20engine%20bay%20look/IMG_7904_zpsp3206gbl.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/2016%20engine%20bay%20look/IMG_7904_zpsp3206gbl.jpg.html)



DASH COMMAND WIFI
Dude logger for HKS dater logging
Full boot lining trim in leather
First Aid compartment/with aid kit
Cold drinks compartment/ drinks to taste !!


Hand brake re leather
Illuminated gear knob re leather
Mazdaspeed door sill trims
Rear parcel shelf Rx8 spirit of the R embroidered logo
carbon fibre switch panels
carbon fibre door opening catch surround
carbon fibre centre console surround
Re leather console covers burnt orange
centre console kill switch
centre console front drive lamp switch
centre console rear brake lower brake light switch
passenger foot plate
Third light mod (RX8) ***** now upgraded to 18 led super bright lights 2012


(http://i1174.photobucket.com/albums/r616/exiledviking1/image_zpskbfy8oqh.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/image_zpskbfy8oqh.jpeg.html)

WIFI DASH COMMAND

PETTIT SUPERCHARGER

Custom paint job burnt orange pearl with twist flip

BONNET STAYS
LSD door fitments
Wind deflectors for front windows
Carbon fibre pillar dressing
Carbon fibre fuel filler cap
Carbon fibre strakes
Carbon fibre front vents


UP dated drop links  AP RACING  FRONT, AND REAR ARE RACING BRAKE all are the adjustable type SEPT/2012

245/35/18 rf re50a  run flat bridge-stone tyres **** up grade TPMS *** 2012 (TYRE PRESSURE MONITORING SYSTEM WITH TYRE TEMPERATURE MONITOR)

Summer wheels by speedline racing

AP racing 4 pot brake calliper and vented disc's split 2 piece brake rotors front /and rear

Racing Brake upgraded Oil lines

KOYO Radiator

Silicone Radiator Hose Kit - Blue

Up graded Pulley KIT

TEIN MONO FLEX AJUST SUSPENSION AND COIL-OVERS

Own Hand Made Aluminium  Engine Under-tray

Own Hand Made Aluminium sump under-tray

Upgraded   Greddy  Brake lines

20MM ALL ROUND Greedy wheel spacers

TWIN RAM AIR INTAKE FOR SUPERCHARGER  with intake Axial Fan Motor

ATH Hinsberger front end
ATH REAR EXHAUST surrounds
ATH  Hinsberger side skirts/ Side skirt LED in orange
ATH Hinsberger front fogs
ATH Hinsberger LED DTRL
R/E front badge


(http://i1174.photobucket.com/albums/r616/exiledviking1/12062952_10204044932598277_1811340887_o_zpsdtdyvtfr.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/12062952_10204044932598277_1811340887_o_zpsdtdyvtfr.jpg.html)

Racing Beat front/rear two piece Brake Rotors Drilled and grove,d
Racing beat exhaust system/and manifold
Racing beat back box
Racing beat mid pipe
Racing Beat resonator cat back

Cusco oil catch tank small 500 mil
Cusco strut brace
Engine 500ml oil top bottle
new drop links adjustable type front AP ..Rear Racing Beat
Tein mono flex adjustable suspension
New front grill
Two staged adjustable Rear boot wing
Rear lower ATH bumper Grills with Inserted Led Brake and Indicators
Short shifter


IN CHECK PLATE EFFECT BY WICKED COATINGS

WASHER BOTTLE X 2
BRAKE RESERVOIR
HEADER TANK
ALTERNATOR COVER
WICKED COATINGS battery cover
WICKED COATINGS fuse box cover
WICKED COATINGS fibre ECU cover
WICKED COATINGS MAF sensor Cover


Anodised red caps for oil res, header tank engine ,supercharger,
Header tank temperature gauge
Anodised red oil fill cap
Oil dip stick covers for engine and supercharger
Quilted under engine cover (SHOWS ONLY)
RAC track star plus
Car fuel immobiliser
HKS IS engine management ECU (none piggy back with HKS modifications )
HKS CAMP II system
Carbon strakes
Mirror polished strut brace
Mirror covers and indicators
Carbon fibre vinyl roof ****  UP GRADED SIDE PANELS (was painted black)
Black diamond gloss roof rails
Black diamond gloss lip spoiler MIDDLE WING

Rear parking sensor,S with Camera / forward camera for speed humps as the cars pretty low

BLACK HALO ORANGE TRACK AND ROAD ENGINE MOUNTS OCT 2013
BLACK HALO COILS
BLACK HALO AIR TRAY
BLACK HALO ENGINE MOUNTS


(http://i1174.photobucket.com/albums/r616/exiledviking1/Facebook/20152016%20PowerGains%20Motorsport%20Ported%20Engine%20and/13002621_225805264452342_8501025310793299835_o_zpsuoagm9ya.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Facebook/20152016%20PowerGains%20Motorsport%20Ported%20Engine%20and/13002621_225805264452342_8501025310793299835_o_zpsuoagm9ya.jpg.html)


NGK Hotter spark plugs
UP graded HT leads
Greddy Oil Sandwich Plate with Oil Pressure and Oil Temp Sensors
Greedy oil pan ***** replaced stock 2012
Magnetic drain plug
Magnetic oil filter
Anodised  red hose end clips
Engine hose,s done by VIPER PERFORMANCE  FOR SUPERCHARGER
RACING BEAT Oil HOSE KIT
CARBON FIBRE HOSE SUPPORTS
Uprated Starter Motor no 3 as at feb 2016
Battery accessories Plate mod
Battery housing voltmeter
   
Hideaway Rear number plate cover shows only

Motorised Front hideaway number plate shows only

SEBON CARBON FIBRE BONNET /MODIFIED RAIN TRAYS rain run off goes through filter to top up the drivers screen washer

HIDE AWAY TOW HITCH FOR MY TRAILER 
SPRUNG ELECTRICS THAT PULL DOWN FROM THE REAR BUMPER WHEN NEEDED
TOW HITCH IS DETACHABLE

MAZDA 6 HEAD LIGHT WASHER SYSTEM


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8817_zpsudp8wrri.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8817_zpsudp8wrri.jpg.html)

3M Clear Protective Film

Cover Head & Tail Light Tinting

R3 type Rear Led Tail Lights

centre Boot Brake led light with flasher unit flashers on first operation then pulse on and off


93% Has Been Listed So Far

Runs on

Protek-R
Oil ProLong
SHELL V~POWER

RE~Map by Toque Developments International on HKS ECU  NEW MAPPING TO BE COMPLETED ON 26 FEB 2015


last but not least the horses are running

1/ 212,BHP (Engine 1 out of the box)
2/Supercharged @ 338 BHP (ENGINE 2) NEW REMAP AND TESTED MAY 2012 added HKS ECU Fuel management system     
3/354BHP (ENGINE 3) Retuned Remapped some modding of engine       
4/ENGINE (4) Now RUN IN as At sept 20th 2016 at @ 370+BHP engine Built  by Powergains Motorsport with engine upgrades/mods Porting Remapping an increase of around 18 Bhp

http://vid1174.photobucket.com/albums/r616/exiledviking1/IMG_5282_zpsxoczsz0z.mp4   <-------Mapping 2015 click on this

Last edited by exiled-viking MRC, now by The Dark Defender some US CLUB Sites, exiled--viking RX8OC,..... Face Book tony Black for the Latest Pictures and Mods



(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_2124_zps2bd2a0bb.jpg)



http://vid32.photobucket.com/albums/d3/Tonyspictures1/IMG_9332_zpsstshykco.mp4


Thanks for taking the time to look,  sorry for the grammar and spelling but follow the photos and you will get the Gist   ;)


last but not least a big thank you to all who helped me on this project with out you I would have never got there thanks again

Damn. I just love that 8!  :P

That list of mods is impressive and long. Well done. :)

Its 1 of the most unique 8s ive seen and a huge amount of work im defo making a b line for it at Japfest so i can see it in the flesh! great work and passion!

thanks chaps it looks better in the photos believe me theres a lot of stone chips and daily where now but its 9 years old I try to keep it looking good but photo shop helps ???

Around 3 months ago I decided to fabricate my own Under-tray this was because there was nothing out there for the price I was willing to pay.
And that I would have ended up modding it to get what I was after, So I needed it to be around 2mm gauge aluminium have two inspection hatchers to get at various parts of the rear front bumper.
Also to add a little more strength, air flow, and air flow up into the superchargers intercoolers also I wanted it to be removable with two plastic grommets, and 8 spire clips it is  now removable in around 5 minutes.

All done for a little Under £40.00 parts and aluminium off eBay with free delivery  :D





First get your aluminium put the old under Tray on the ally and scribe around the tray and all the mounting holes

1/  (http://i1174.photobucket.com/albums/r616/exiledviking1/11215135_132538027112400_8577375797835579297_n_zpsqrjsmoim.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/11215135_132538027112400_8577375797835579297_n_zpsqrjsmoim.jpg.html)

cut around you scribe marks

2/

you should end up something like this  I trimmed mine with some rubber seal

3/(http://i1174.photobucket.com/albums/r616/exiledviking1/10407434_846481198752997_2119493637574526509_n_zpst1sjrhbi.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/10407434_846481198752997_2119493637574526509_n_zpst1sjrhbi.jpg.html)

I then started Fabricating my bespoke parts then started making the sump Under tray

(http://i1167.photobucket.com/albums/q638/3733cadwal/Facebook/2014%20to%202015%20refurbish%20my%20RX8/10286757_846481152086335_4161785268334216294_o_zps6s1cr8zc.jpg) (http://s1167.photobucket.com/user/3733cadwal/media/Facebook/2014%20to%202015%20refurbish%20my%20RX8/10286757_846481152086335_4161785268334216294_o_zps6s1cr8zc.jpg.html) move one

4/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5932_zpswtkmhdlv.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5932_zpswtkmhdlv.jpg.html)


Holes cut starting to work out what needs to go in and where

5/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5938_zpsl86l8l44.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5938_zpsl86l8l44.jpg.html)

Once all the parts are made I started putting it together made the vents to size added seal, then pop riveted the vents on along with the air deflector.

The Inspection hatchers at the front have 4 spire clips fitted (2 per Hatch ) so if you slacken one off and remove the other screw then the hatch can be opened with out having to fully remove it.

6/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5979_zps20xmqgrk.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5979_zps20xmqgrk.jpg.html)



7/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5966_zpsu81uvfia.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5966_zpsu81uvfia.jpg.html)

Road view of UnderTray,s   ^^^



(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5973_zps03j7okaa.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5973_zps03j7okaa.jpg.html)


I used M6 spire clips to fix this to the car x 8 and flat head screw bolts


(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5981_zpsrbcjfihv.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5981_zpsrbcjfihv.jpg.html)




Fits like a glove good project for a Sunday Afternoon  thank you for taking the time to look :wink:  :thumleft:

So whats under the Bonnet /Hood this is todays 19 feb 2015 Engine Look. MOT/ Oil Change tomorrow eek.

Well I took the Old Engine Out It had Done 49,300 Supercharged Miles Still Running Fine and Running Mid 7s It was a shame to pull it out. (This Engine will Be Used In Another Build Something really Special Brap, Brap, Brap, and Supercharged around 2017)

Early Last Year (Before my accident when the car was rear Ended and then shoved under the rear of a truck) I had been on to Power~Gains Motorsport to Build me something a little special, Kerim took the Racing Beat Street Porting Kit to Another level adding some Extra touchers.

The Engine Build Will Be in another thread soon.

This is just some of the Car,s Engine Bay Finished Pictures For 2015 No Figures As Yet Mapping By Torque Developments International On the 29 feb. This Is Pic Heavy !!

Welcome To Under The Bonnet


Carbon fibre bonnet home made grills And modified Rain Trays


Short video of the Build please watch in HD ------->  https://www.facebook.com/people/Tony-Black/100012790506396

The Front Bumper Is ATH Hinsberger with a lot Of Modifications



The Rain Trays Have Been Modified so they still let Hot/Warm Engine Air Out and if Raining collect the rain keeping it off the engine bay buy funnelling the water out down two rain tubes.

1/(http://i1174.photobucket.com/albums/r616/exiledviking1/DSC01229_zpskjzbke3a.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/DSC01229_zpskjzbke3a.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/DSC01233_zpsd2hipqgb.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/DSC01233_zpsd2hipqgb.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/DSC01236_zpsid2imuws.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/DSC01236_zpsid2imuws.jpg.html)


EXTRA OIL I carry 0.75 of a Litre of Oil Here/Carbon Fibre Holder

2/(http://i1174.photobucket.com/albums/r616/exiledviking1/DSC01254_zpsz3ngrnsp.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/DSC01254_zpsz3ngrnsp.jpg.html)


Air filter breather and protection plate I made But I did not Like the look but the concept worked so i got Creative Water~Jet  to cut the plate and then I fabricated the Rest to fit and Added the Mesh and sprayed it up in crackle paint

4/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_7886_zpschje8l8s.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_7886_zpschje8l8s.jpg.html)


THANKS FOR TAKING THE TIME TO LOOK.


When I park the Car Up In the Garage lift the Bonnet and Connect the Battery Regulator to keep the battery in tip top condition the connector is wired straight to the Battery

3/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5179_zps6e54b8f5.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5179_zps6e54b8f5.jpg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/CTECK%20Battery%20MOD/IMG_7671_zpsufqu7jtg.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/CTECK%20Battery%20MOD/IMG_7671_zpsufqu7jtg.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/CTECK%20Battery%20MOD/IMG_7660_zpsdwzjyzxs.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/CTECK%20Battery%20MOD/IMG_7660_zpsdwzjyzxs.jpg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/CTECK%20Battery%20MOD/IMG_7634_zpswgwfgc6m.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/CTECK%20Battery%20MOD/IMG_7634_zpswgwfgc6m.jpg.html)


Air filter breather and protection plate I made But I did not Like the look but the concept worked so i got Creative Water~Jet  to cut the plate and then I fabricated the Rest to fit and Added the Mesh and sprayed it up in crackle paint

4/ short vid thanks for taking the time to look ------> http://vid1174.photobucket.com/albums/r616/exiledviking1/2016%20engine%20bay%20look/2016%20370%20BHP%20Rotary_zps4thjdyki.mp4


THANKS FOR TAKING THE TIME TO LOOK.

Tony. Awesome. The quality is in the details of all the little touches. Plug in charger my fav! Very neat!

Really pleased for you that the whole project has come together exactly as planed, I think we can safely say you have created the most stylish RX-8 in the world bar none  :bravo_2:

Thanks for all your Input Keep it coming  ;) today I took the Car for Service and MOT went through no problems thanks to the lads over At Bespoke for the Banter and service and Lisa and Clive for supplying the servicing bits (  9years old now and to think I WAS GOING TO CRUSH IT LAST YEAR ::) :eek:)

Got These Yesterday as well I be doing a fit next week and a some photos of the fit :!:


some pic,s of the early delivery yesterday as I have led reverse and Indicator lights this will mean i have converted the hole rear end including the 3 brake light and rear fog to led,s there going to be covered in the Covex Tint before fitting Now update did not like the Covex film so went with a gray smoked effect light.


1/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5390_zpsauli54np.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5390_zpsauli54np.jpg.html)


2/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6625_zpsmgx2avqv.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6625_zpsmgx2avqv.jpg.html)


3/(http://i1174.photobucket.com/albums/r616/exiledviking1/Facebook/rear%20lights%20may%202015/11313056_920804867987296_1699999796653558803_o_zpsffmjjqq8.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Facebook/rear%20lights%20may%202015/11313056_920804867987296_1699999796653558803_o_zpsffmjjqq8.jpg.html)

not bad for the price  ( total £120.00) :thumright:  :thumleft:  :wink: as £335 was way to much to pay. post some pics of the fit later

..

Well Today got down to using the new gas soldering Iron a lot of tidying up under the Centre Console
Its a bit like spaghetti under there and a complete mess its just been added to over the years so I got to it :






THANKS FOR TAKING THE TIME TO LOOK ;)


1/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5217_zpsqp3glovw.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5217_zpsqp3glovw.jpg.html)

OMG it look like sh*T on the plus side at least no fire :eek:


After 2 hours and a few cups of tea I feel I was getting there

2/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5303_zpsimcmmuoq.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5303_zpsimcmmuoq.jpg.html)

making some headway

3/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5318_zpsynsb1bfd.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5318_zpsynsb1bfd.jpg.html)

Tidy or what now only 3 connectors to unplug and the centre console is off
 
4/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5305_zpsaacgczze.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5305_zpsaacgczze.jpg.html)


FOUR SWITCHERS ARE :-

RED           Console Light Switch =      ECU HKS (ISFCON)
GREEN      Console Light Switch =      REAR LOWER BRAKE LIGHTS
BLUE         Console Light Switch =      FRONT DAY TIME RUNNING LIGHTS OVER RIDE SWITCH
YELLOW   Console Light Switch =      IN LINE 50MM AXIAL FAN OVER RIDE FOR SUPERCHARGERS COLD AIR INTAKE

RED OBLONG COVER IS THE 3RD OBDII CONNECTION GENERAL USE

SEAT HEATER SWITCHERS AND MY SAT/NAV UNIT

5/(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_5325_zpspr37lggy.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_5325_zpspr37lggy.jpg.html)

Back Together and  time to test all is ok yep another job off the list   :)

DID A BIT OF A SPRING Clean


(http://i1174.photobucket.com/albums/r616/exiledviking1/Facebook/Engine%20Bay%20for%202016/12778836_190532957979573_2419498210855515008_o_zps3zr4dp1x.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Facebook/Engine%20Bay%20for%202016/12778836_190532957979573_2419498210855515008_o_zps3zr4dp1x.jpg.html)

A few pic of the Build


(http://i1174.photobucket.com/albums/r616/exiledviking1/Number%20Plate%20Mod%20full%20edition/th_IMG_8643_zpswlximika.mp4) (http://i1174.photobucket.com/albums/r616/exiledviking1/Number%20Plate%20Mod%20full%20edition/IMG_8643_zpswlximika.mp4)  <---- short Vid of the number plate click on the photo


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/IMG_8220_zpssco1rbfz.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/IMG_8220_zpssco1rbfz.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Shows%20and%20stuff/IMG_8093_zpspxkuqsib.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Shows%20and%20stuff/IMG_8093_zpspxkuqsib.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Shows%20and%20stuff/13227797_244161119283423_8683168267188939968_o_zpsa2sgpibf.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Shows%20and%20stuff/13227797_244161119283423_8683168267188939968_o_zpsa2sgpibf.jpg.html)

Ooooooooooooooooooh, I so love this car and the time, effort and skill that's gone into it. Keep on posting.

this is the cumulation of the Nine year project well it was worth the rebuild last year below made it just that bit special as it says on the Trophy

(http://i1167.photobucket.com/albums/q638/3733cadwal/IMG_6306_zps63n7ssry.jpg) (http://s1167.photobucket.com/user/3733cadwal/media/IMG_6306_zps63n7ssry.jpg.html) THE 40th Trophy and its Last :-[



(http://i1167.photobucket.com/albums/q638/3733cadwal/IMG_6330_zpszcr4mqod.jpg) (http://s1167.photobucket.com/user/3733cadwal/media/IMG_6330_zpszcr4mqod.jpg.html)


(http://i1167.photobucket.com/albums/q638/3733cadwal/Facebook/MRC%20Road%20RUN/11709785_949987398402376_5660594070396224282_o_zpslffz6o9r.jpg) (http://s1167.photobucket.com/user/3733cadwal/media/Facebook/MRC%20Road%20RUN/11709785_949987398402376_5660594070396224282_o_zpslffz6o9r.jpg.html)

(http://i1167.photobucket.com/albums/q638/3733cadwal/11180617_1037234256287110_5523599612873271123_n_zps8q1yvbae.jpg) (http://s1167.photobucket.com/user/3733cadwal/media/11180617_1037234256287110_5523599612873271123_n_zps8q1yvbae.jpg.html)

thanks to all, & now too look for Another Project my be a 7 8)

Go on Tony, do it !! Its the only way to BIG POWER !!!!  ;D

Your car is just awesome Tony  

One of my fav pic,s



(http://i1174.photobucket.com/albums/r616/exiledviking1/Shows%20and%20stuff/IMG_8093_zpspxkuqsib.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Shows%20and%20stuff/IMG_8093_zpspxkuqsib.jpg.html)

Another nice drive today just over 120 + miles and still running her in and guess what


(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6573_zpsmffvatsf.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6573_zpsmffvatsf.jpg.html)  <--------  :13: :13: thats the best bit

Now there's some good news  :D

Now, there is one thing to do then; drive it like lunatic ;)

took her out today again another 160 miles on the clock still no Codes  ;D a few more pony,s let out almost run her in.

(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6636_zpsuv4sceti.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6636_zpsuv4sceti.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6625_zpsmgx2avqv.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6625_zpsmgx2avqv.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6624_zpsi8cajh6z.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6624_zpsi8cajh6z.jpg.html)

Mx5 will be nice

Yep i agree But as a young lad in the Army i so wanted two car,s a Mazda Rx~7 any type and a Datsun 240z I got two of those one white, and then a apple green, but then got silly and married bought a house, and could never afford the 7 now its the other way round got two houses and the money not married but sooooooooooo close to it, cannot choose between  the cars, i could have both but Amanda says the 8 got to go if i do that and I cannot seem to want to part with it its my Stephen Kings Christine to me ;)

sorry to anyone following on face book it all got a bit silly, and then my account got hacked then the haters/ trolls turned on the project and posted it on Rice out mazdas and the more haters, some threats to damaging the car if any one sawtout and about so I closed the account and pulled all the photos and De~friend everyone. I will start the the photo project again later under another name and only friend those i know so if you were wondering what was going on,  but i was getting too much of hater and trolls, Face book keyboard warriors just love em ??? 

People !!!!!!!!!!!!! :91:

What happened?

So theres actually a website for people who dont like jap cars.... ???what is the world coming too.  I dont like courgettes :angry5: but does not make me wanna join a courgette bashing website!.
simply jealous of your car and modding skills .  ;D

Did a bit of googling and descovered theres a ricer test and im a ricer lol! Riced and Proud! :))

so you modify a jap car and your a ricer.....so if modify a german car are you frankfurterer!!!lol

Hmm, if modifying french car what are those called? ;)

Snailers.

Lol although I dont see any point on tuning those ;)

The Face Book Page Is for Any  Japanese car, the 170 closed group RX rotary Owner,s there are around 22 or so in this group from the Uk most from the USA they pick on some one,s car by befriending them so you let them into your face book page then they take photo,s from your page of your build then post it up for assassination rip the build apart wait for you to retaliate But what they cant stand is if you start agreeing with them as they would like confrontation,,
The trouble is i was a member under another name which they do not know about when my turn came some of the so called uk owners even said that if seen it would receive a KEY reception so take that as a play on words if you like but i took it as a threat so thats why i took a back step and pulled my page .

I will set it back up with photos but once again there small narrow minds and bigoted kids came to mind but the avg age was around 35 out  spoil things.

My new Sign on for Face Book Is Now Riced Out  ;) true

Thanks for letting me rejoin your FB Timeline Tony but this time I not giving you any names for suggestions of people you may know

No problems Nigel

The Powergafns Motorsport Ported Engine built By Kerim Fahri Supercharged by Pettit Racing and Run on
HKS FCON IS ECU has Done 1000 miles today running smooth with a full Racing Beat Europe, resonated Decat, manifold, & back box exhaust system, Oil cooler lines from RB as Well, Coils from Black Halo Racing as you can see No Codes !!! all these and more mods Making the Car Run Right and sounding Awesome . Thanks Guys for some quality Products, Have a Happy Christmas and New Year.

(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6971_zpsijtcosew.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6971_zpsijtcosew.jpg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6978_zps2jrcta4g.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6978_zps2jrcta4g.jpg.html)

Good news Tony!

thanks man this is got to be one of my fav pictures at the moment



(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_6878_zpsih4q1qxr.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_6878_zpsih4q1qxr.jpg.html)

Got the Lower Grill kit I have been making back from being hydro dipped by Wicked Coatings in  Carbon fibre effect, today so fitted them to the Rear of the bumper thats it rear end now done on to the New front end Look  ;)



(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/IMG_8176_zps2kdvkq5n.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/IMG_8176_zps2kdvkq5n.jpg.html)



(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/IMG_8201_zpssywwmhpi.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/IMG_8201_zpssywwmhpi.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/IMG_8220_zpssco1rbfz.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/IMG_8220_zpssco1rbfz.jpg.html)

One word Tony/ WOW  8)

Ditto what Clive said, looks fantastic Tony  :)

Thanks chaps, not bad made from an old ford grill ;) full cost around £35.00 including the dipping around 20 hours work...

well Another mod.........
Steering Wheel Mod ( Motor Number Plate Control )...Right hand Drive steering wheel Mod for the control unit for my HideAway number Plate,.... Other Countries have Cruse Control on this side but it was not an option for us here in the uk.... Hence making the use of the blank plate. Thanks For taking the time to Look.......

https://www.facebook.com/100012790506396/videos/vb.100012790506396/129652874137729/?type=3&theater

(http://i1174.photobucket.com/albums/r616/exiledviking1/Number%20Plate%20Mod%20full%20edition/IMG_8634_zps4shzt3bt.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Number%20Plate%20Mod%20full%20edition/IMG_8634_zps4shzt3bt.jpg.html)



http://s1174.photobucket.com/user/exiledviking1/slideshow/Number%20Plate%20Mod%20full%20edition <--------click on this First


(http://i1174.photobucket.com/albums/r616/exiledviking1/Number%20Plate%20Mod%20full%20edition/th_IMG_8643_zpswlximika.mp4) (http://i1174.photobucket.com/albums/r616/exiledviking1/Number%20Plate%20Mod%20full%20edition/IMG_8643_zpswlximika.mp4)  <----- click on this to see what it dose .....LOL

So just spent the last couple of hours putting this thread Back together so from page one all the photos that had been deleted by photo bucket because they broke the link are now back thanks for taking the time to look still some more photos to be added but will do this later.......... ;)




(http://i1174.photobucket.com/albums/r616/exiledviking1/12062952_10204044932598277_1811340887_o_zpsdtdyvtfr.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/12062952_10204044932598277_1811340887_o_zpsdtdyvtfr.jpg.html)

Never noticed your seats before Tony there lush. I need to go to a show and not track so time for a proper look around yours....im not doing beaulieu unfortunately gotta work.

Sent from my SM-N910F using Tapatalk

Keep forgetting some of the many mods on this car. Looks awesome Tony. Well done

Thanks Chris hoping to see you over the weekend ;)

well last week dropped a set of ladders on the front end and wings so a fair bit of work to be done not happy thought about applying the course i did last year so got to grip with the wings the passengers side is done but i have a large crease in the drivers side its all down to cash which I will not spend on the build now if I cannot fix this then I will be parting the car out,  :( how ever some cleverly made plates and some carbon fibre hydro dipping rather than spending cash on a spray job might work I am half way through a front end build so it might work out fine in the end.


aaaaaaaaaaaaH Bloody Cars : :'(


(http://i1174.photobucket.com/albums/r616/exiledviking1/Facebook/Cover%20Photos/10487183_846495435418240_9199863574834707604_n_zpsswol19hm.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Facebook/Cover%20Photos/10487183_846495435418240_9199863574834707604_n_zpsswol19hm.jpg.html)

Gutted for you Tony  :(

Hope you can get it sorted easily.

Arrrrrrrrrrggggggggggggggggg :(

Made my mind up Today I am NOT GOING TO REPAIR THE CAR ITS GOING TO BE STRIPPED DOWN AND PARTED OUT end of a decade of modding going to spend the winter stripping the car down then next year start selling off the parts as I will make a better return doing this.....
??? ??? ???

O Dear, I thought it was only front end damage and we could look forward to a re-styled RX-8 , no romping off to the Netherlands next year then  :(

Really sorry to hear this will be the end of this unique car  :(

Quote from: Casey on August 09, 2016, 11:01:20 PM
Really sorry to hear this will be the end of this unique car  :(

Yes, my thoughts exactly... :(

Tony, dont do it ! Far easier to repair than take apart and dealing with all the vultures....
Repair it and enjoy it for as long as you can.  Sell the ladder!

Sent from my SM-N910F using Tapatalk

Quote from: boosted on August 10, 2016, 10:00:54 AM
Tony, dont do it ! Far easier to repair than take apart and dealing with all the vultures....
Repair it and enjoy it for as long as you can.  Sell the ladder!

Sent from my SM-N910F using Tapatalk

As above but BURN THE LADDER that's caused you grief, sounds like you need to take it out on something  >:D

Quote from: clive on August 09, 2016, 10:38:39 PM
O Dear, I thought it was only front end damage and we could look forward to a re-styled RX-8 , no romping off to the Netherlands next year then  :(

Sorry Even started today to strip the Interior out got some one coming for it at the weekend ???

OMG Tony, what's going on mate ??

I thought mine had suffered some decision making damage (still not agreed with my insurance), but given your investment of time, effort and money in this car, I thought it would be yours forever !!

Hi Chris.......Nope Amanda wants me to move on plus I cant be bothered with it any more I got a new contract starting soon for a few months ( work sort of military....!!!  ) and she dose not want it laying around in bits had two tyre kickers for bits but I will not drop the price just Vultures at the moment now i got it on a german and french club for sale we will see how things will go as I got around ten people turning up over the week end. if I don't get what I want I put it off the road in my other look up till next year :(

well I had 7 out of ten viewings at stuff what,s wrong with people   :angry5: :angry5: :angry5: :angry5: tell them the price on the phone and what do they want the bits for less than half the price you said.......!!! well they can GO FORTH & multiply in other words F*** OFF the bits and car are not for sale...

Going to empty the lock up out over the next week and shove it in there till next year ...... ( Amanda,s Not happy but Hay~ho dog house again...!!! going back to the Motor Bike nothing to big anything around the 750cc will do.. )

Good shout mate....put it out of sight and out of mind for abit... 8)

now bikes...Truimph Speed triple.....good looking naked bike....if i was to get back into bikes it would be a naked speed triple...or maybe a Kawasaki Z

ive had.
Yzfr600 thundercat 99
Honda cbr 600 98
Honda Cbr900 Fireblade 98
Truimph Sprint 955i
Kawsaki zx6r 2009
Aprilia Mille r 1000 twin 99
Suzuki Gsxr 1000 2004
Gsxr 600 2000
Kawasaki z1000 custom 1982

good times on them....only fell off twice. :))
Kawasaki z1000 or speed triple is what id go for now...

which bike you thinking about....theyve made a new bonnevile!!!

Quote from: exiled-viking on August 13, 2016, 02:55:09 PM
well I had 7 out of ten viewings at stuff what,s wrong with people   :angry5: :angry5: :angry5: :angry5: tell them the price on the phone and what do they want the bits for less than half the price you said.......!!!

Damn tyre kickers,

I had a whole family turn up one Saturday afternoon and after an hour I realised this was their version of a day out with never any intention to buy, grrrrrrrrrrr, people.

Im really sad. Never got change to see that awesome 8 in person...  :(

Lähetetty minun E2303 laitteesta Tapatalkilla

"going back to the Motor Bike nothing to big anything around the 750cc will do.. "

Err gunna run out of good weather soon for an open top rocket with handle bars  :D

Back today from Wicked Coatings my hand made rear lower bumper Grills they did a good job coating them in there carbon fibre effect gloss just go to fit them now ... and hope they don't get nicked again



(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/IMG_8783_zpsbnghryd8.jpg)[/URL



[URL=http://s32.photobucket.com/user/Tonyspictures1/media/Lower%20Rear%20Vent%20Mod/IMG_8809_zpslpjesc3x.jpg.html](http://i32.photobucket.com/albums/d3/Tonyspictures1/Lower%20Rear%20Vent%20Mod/IMG_8809_zpslpjesc3x.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/IMG_8783_zpsbnghryd8.jpg.html)

MK2 Version look better  :PDT_Armataz_01_37:

Thanks CLIVE I think so as well but I think it's a bit rich to get them nicked to make me build better ones lol  hope to have a few hours Sunday to fit them ...

They look fantastic Tony  :13:

Very tasty. You fancy making bits for an FD that will needs lots of bespoke bits  :))

You want any help Chris And I will help you out  ;)

More work for a couple of hours today now the rear end is back together bolted the grills in this time..... ;)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8800_zpsoazyyums.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8800_zpsoazyyums.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8843_zpscmppjlrv.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8843_zpscmppjlrv.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8823_zpsxlgzkrhb.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8823_zpsxlgzkrhb.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8834_zpsllxkmrpf.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8834_zpsllxkmrpf.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8810_zpsl9d8vpnj.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8810_zpsl9d8vpnj.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8817_zpsudp8wrri.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Rear%20Grill%20mod/2016%20new%20Rear%20Grill%20Mod/IMG_8817_zpsudp8wrri.jpg.html)

thanks for Taking the time to look

(http://i1174.photobucket.com/albums/r616/exiledviking1/Washer%20Tank%20Mod/IMG_7311_zpsvyto8qbn.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Washer%20Tank%20Mod/IMG_7311_zpsvyto8qbn.jpg.html)


well a Quick mod today Ran the two water pipe,s from my rain trays under the bonnet into one out let feed then to an inlet feed to the drivers windscreen wash tank put a small filter on the end of the pipe this now when raining top up the windscreen wash bottle when driving or when static theres also an overflow that runs out at the end of the engine bay ...... ;)

p.s thats after topping up the bumper headlight screen wash tank as well  ;)

You can just about make out the white right angle water pipe going into the top right of the tank

(http://i1174.photobucket.com/albums/r616/exiledviking1/fullsizeoutput_8c2_zpsuoy92zf6.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/fullsizeoutput_8c2_zpsuoy92zf6.jpeg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/fullsizeoutput_8c3_zpsjygol4v8.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/fullsizeoutput_8c3_zpsjygol4v8.jpeg.html)

So Its not taken me long to get the work done on the front end where I dropped a set of ladders on the car I only had one Crease/dent that I could not remove so I opted for a cheep fix well bespoke car Bespoke fix Lol cheeper than £1500.00 for paint and parts I would have done the Labour so this was around £90.00 all in cut ,dipped, and fixed goes well with the Strakes ,,

(http://i1174.photobucket.com/albums/r616/exiledviking1/fullsizeoutput_8be_zps67dmvpnd.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/fullsizeoutput_8be_zps67dmvpnd.jpeg.html)



(http://i1174.photobucket.com/albums/r616/exiledviking1/fullsizeoutput_8bc_zpsftqakuk0.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/fullsizeoutput_8bc_zpsftqakuk0.jpeg.html)



(http://i1174.photobucket.com/albums/r616/exiledviking1/fullsizeoutput_8c1_zpsxzobfhe1.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/fullsizeoutput_8c1_zpsxzobfhe1.jpeg.html)

yep I know i left the bonnet of its catch

(http://i1174.photobucket.com/albums/r616/exiledviking1/fullsizeoutput_8b8_zpsm94j2v28.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/fullsizeoutput_8b8_zpsm94j2v28.jpeg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/IMG_8913_zpsorbsrhas.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/IMG_8913_zpsorbsrhas.jpg.html)


thanks for taking the time to look now i can get back to making the new front end bumper ;)

Back to its former glory and even better 8)

thanks clive its got to be better than the ripples along the wing ;)

Can't have  ripples along the wing or it won't fly properly  ;D

Glad to see the car back to it's pristine best. The addition of the two panels to cover the 'ripples' is a class act and looks well Tony

Great to see her back to top form Tony  :)

Thanks Chaps Now I can get the winter service done and out of the way, then I can start to build the new style front end just a few tweaks here and there, when I have done this next Contract for MOD I will be able to get going ..... ;) works always got to get in the way  :-X :-X

Started the Front Bumper/nose cone build today nothing to much just a refurbish of some old grilling getting the parts ready for making the nose cone start of this new thread......


(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8c5_zpsgtcb2o8g.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8c5_zpsgtcb2o8g.jpeg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8c7_zpsthbsc9fm.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8c7_zpsthbsc9fm.jpeg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8c9_zps7opahamr.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8c9_zps7opahamr.jpeg.html)

Ok had some time today so Onward with the nose cone build what I got to so far or a small slide show of the build thank you for taking the time to look ;)


(http://i1174.photobucket.com/albums/r616/exiledviking1/Facebook/New%20Build%20Thread%20Started%20Front%20BumperNose%20Cone/14753965_200646657038350_4437362470863603962_o_zpsowhss2vx.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Facebook/New%20Build%20Thread%20Started%20Front%20BumperNose%20Cone/14753965_200646657038350_4437362470863603962_o_zpsowhss2vx.jpg.html)



http://s1174.photobucket.com/user/exiledviking1/slideshow/Facebook/New%20Build%20Thread%20Started%20Front%20BumperNose%20Cone  <---- click here for slideshow....




(http://i1174.photobucket.com/albums/r616/exiledviking1/Facebook/New%20Build%20Thread%20Started%20Front%20BumperNose%20Cone/14712986_200646253705057_7851131960727241642_o_zpsdygen4nd.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/Facebook/New%20Build%20Thread%20Started%20Front%20BumperNose%20Cone/14712986_200646253705057_7851131960727241642_o_zpsdygen4nd.jpg.html)

Looking good Tony  :13:

thanks Man ;)

well done some more  on the build over the last few days



(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_9025_zpstsh4b4tf.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_9025_zpstsh4b4tf.jpg.html)



(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8ec_zpszahalge5.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8ec_zpszahalge5.jpeg.html)

Rubber O rings made to mount the lamps

(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8e0_zpsdwmbh3xu.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8e0_zpsdwmbh3xu.jpeg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_9039_zpsvylthzux.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_9039_zpsvylthzux.jpg.html)

marking out the grills to cut and fit the O rings

(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8e6_zps7ajh4ex8.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8e6_zps7ajh4ex8.jpeg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8e7_zpsxopsy3hv.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8e7_zpsxopsy3hv.jpeg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8eb_zps6dlnjkce.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8eb_zps6dlnjkce.jpeg.html)




(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8ea_zpsgxuzsw53.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8ea_zpsgxuzsw53.jpeg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8d8_zpsvftavbjo.jpeg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/fullsizeoutput_8d8_zpsvftavbjo.jpeg.html)

(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_8986_zpseus14jhw.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_8986_zpseus14jhw.jpg.html)


(http://i1174.photobucket.com/albums/r616/exiledviking1/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_8992_zpsg5pcygqe.jpg) (http://s1174.photobucket.com/user/exiledviking1/media/2017%20New%20Nose%20Cone%20Bumper%20Build/IMG_8992_zpsg5pcygqe.jpg.html)


I Know it looks a little odd but once mounted I sure it will look Ok still a long way to go yet ;) ;)




thanks for taking the time to look

Got this from Amanda for the car for the iPhone  7s and iPad mini works well with dash command


(http://i32.photobucket.com/albums/d3/Tonyspictures1/Mapping%20And%20OBDII%20HKS/612c0BP8lhL._SL1001__zpsrk7vwqre.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Mapping%20And%20OBDII%20HKS/612c0BP8lhL._SL1001__zpsrk7vwqre.jpg.html)

WELL in the video It says the car has not run for around six weeks but Amanda checked the Calendar and found it was nearer to 9 weeks so she started a little sluggish but still the first turn of the Key no chance of taking her for a drive as have not had the ok from the Doc yet and I need to fit a new door gas Ram but pleased  just to sit in her and flip the accelerator .......  then put Her back in the garage....


http://vid32.photobucket.com/albums/d3/Tonyspictures1/IMG_9332_zpsstshykco.mp4  <-------- click on this


thanks for taking the time to look

Id say that was pretty much instant!   shes got blankies on....truly pampered car  8)

Well for the last few months I have Been trying to get around the dreaded
RX~8 v10.1 and v9.81 Radio firm ware  well with a few bits I have Beat it Now the I phone will link by Bluetooth/or by cable or/wifi as soon you turn the Ignition on the head unit radio , 4500 songs at the touch of a button just love it,

UBC = umbilical block connector

The small head unit  is form the USA around $14.5

The kit part made up of two block connectors  got off ebay 1/  take the block connector out of  Mini disc HD player (sorry Old School) Then plug in the umbilical connector block (which I have made) 2/ then replace the mini disc block connector into the back of the new UBC  the lead from the UBC  then  plugs into to the small bluetooth head unit .( in picture one) you have to make up the UBC connection wires around a meter each in length this gives you plenty of scope when hardwiring and hiding the wires out of sight …….

the small bluetooth head unit can be run in four  ways

1/ Fm bluetooth - radio connection  select any frequency 87.5 to 88.9 & pair instant music from your phone ….(with this there is a little back ground hiss not that audible can be heard around the volume 24 setting)   

2/ mini 32gb SD Card (the card holds 4500 music tracks approx) And is  radio Direct link from small head unit through UBC, press twice on Cassette/mini disc button on mazda radio unit this then connects direct and overrides the mini disc option….

3/my iPhone or android (my Samsung ) connection is use the Link supplied cable to the ear phone out socket into the USB connection to the small head unit this is the direct link to the mazda head unit and works like the 32gb card but over overrides the 32gb card and is the direct link with the radio to connect with the radio just press the cassette/mini~disc button twice this will then override the mini~disc or cassette  a line in with clear no hiss or back ground noise….

4/ you can use it a bluetooth phone connection


I love the cable link direct to the Mazda head unit there is a slight loss of volume as in the first two settings is not audible but from volume 3 setting up to the limit is fine ….


The steering wheel lets you select tracks up and down all let you control the volume just a you do for cd

There is no fascia display just says mini/disc select but will play as many music tracks on your devise on a auto shuffle or playlists or Genres, albums, artist,or compilations ….

If you do not have the Aux equipment i.e. mini~disc/cassette players then just plug the made up UBC plug into the back of the AUX connection .

The small head unit comes from the USA and is Not the one for Mazda cars…thats your first hurdle…. then there UBC  is for other types of car,s  thats the tricky bit you have to get the blocks for the RX~8….. then take out the pins from there UBC to  small head unit  and place them into the Mazda aux unit …

You need to know what your doing as you can blow the complete Mazda head unit if you get the five wire connection incorrectly..  you also need to link the two live wires one to the Ignition and the other to the head unit live also you need a good Earth point but not with other earths terminals

You need A USB aux connection either through you cigarette lighter point or one of those multi adaptors …….

I have hard wired mine in now and I think its one of the best mods I have done……I am keeping this for my self as I am road testing it for a while but it works with V10.1 & V9.81 firm ware…….. the picks do not give much away 

total cost around £25.00



the USA Small Head unit devise on the left

(http://i32.photobucket.com/albums/d3/Tonyspictures1/HEAD%20UNIT%20MOD/fullsizeoutput_9e5_zpsttdmkp1y.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/HEAD%20UNIT%20MOD/fullsizeoutput_9e5_zpsttdmkp1y.jpeg.html)

USB/phone/ipod/music devise

(http://i32.photobucket.com/albums/d3/Tonyspictures1/HEAD%20UNIT%20MOD/fullsizeoutput_9e6_zpskjpkluur.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/HEAD%20UNIT%20MOD/fullsizeoutput_9e6_zpskjpkluur.jpeg.html)

top of the devise is the 32gb mini~disc port

(http://i32.photobucket.com/albums/d3/Tonyspictures1/HEAD%20UNIT%20MOD/fullsizeoutput_9e2_zpswmrhqobz.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/HEAD%20UNIT%20MOD/fullsizeoutput_9e2_zpswmrhqobz.jpeg.html)


(http://i32.photobucket.com/albums/d3/Tonyspictures1/HEAD%20UNIT%20MOD/fullsizeoutput_9f0_zpsrxcieezs.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/HEAD%20UNIT%20MOD/fullsizeoutput_9f0_zpsrxcieezs.jpeg.html)


Oh and when you connect your devise some Chinese lady tells you that your  connected to the Head unit once you have pressed the cassette/minidisc button twice and that is through FM bluetooth ~SD card direct Or direct iPhone cable ,  ;D ;D


                                                                  Thank you for taking the time to look....

well back from my service over at Bespoke performance today New Gas Ram for the drivers door now fitted, brake oil change Done , then the MOT Done

and Passed No advisories fit for another year of motoring she's NOW 11 years old :wee_hee:   :happybirthday3: Car

Last few days for a few hours I been doing the new front end build on a spare ATH bumper a few pics of what I am up to still got a long way to go  :)

The Backing plate made which will be sprayed black once the Led's mounting holes have been drilled

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9468_zpsnm0ixgso.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9468_zpsnm0ixgso.jpg.html)

mesh fitted

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9469_zpstdl89god.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9469_zpstdl89god.jpg.html)

now mounting the four of five strakes

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9479_zpsft865fe8.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9479_zpsft865fe8.jpg.html)

then the led holes drilled and Led's fitted

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9487_zps0si7v6gx.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9487_zps0si7v6gx.jpg.html)

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9482_zpssiwrwqjv.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9482_zpssiwrwqjv.jpg.html)

indicators modded a little to fit flush

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9474_zpsdgftguxj.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9474_zpsdgftguxj.jpg.html)



(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9472_zpsdq6qwyax.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9472_zpsdq6qwyax.jpg.html)

still to fit

head light washer system

front Camera

front distance sensors X 4

Cannards and air fins to be made

Hide`away number plate to be fitted

Centre grilling to be made

Bumper to be Covered in New type 3M clear Shield film

Carbon fibre  strips to be made

CETEK battery charger Adaptor to be made

ETC ETC

                                                                                                   thanks for taking the time to look  ;)

Really nice! :)

Lähetetty minun E2303 laitteesta Tapatalkilla

well a bit more one the RICE Machine today    Making the Front Canards
                                                               *************************

First eat some Rice Gives you Energy  ;D  :13:


https://www.flickr.com/photos/exiledviking/35126256854/in/dateposted-public/


then take couple of ally strips and start fabricating them these do have a purpose they protect the under side of the front bumper


https://www.flickr.com/photos/exiledviking/35156252703/in/dateposted-public/

cut/ shape 



there still in the build stage as theres some tweaks to do once completed they will be put on the new front end to get the right look then sent off to be covered in carbon effect hydro dip...... just a quick update as I am not attending any shows with the car this year.........

Wow, they took some time to form  :great:

So the Build goes on for the last few days I been modding the second part of my rear defuser I have taken photos of various Rear defusers and made one of my own I only done the panels as yet but the modded parts have come to gather well so Here a few pics and a slide show thanks for taking the time to look

the first part was the inserts that idid last year :-

https://www.flickr.com/photos/exiledviking/35924812146/in/dateposted-public/




The full kit made up of aluminium and a rubber/resin/fibre board that will be hydro dipped in a Carbon fibre effect...

https://www.flickr.com/photos/exiledviking/35156230123/in/dateposted-public/

the ally plate is to the road side and is a scuff plate only the small fins four of them will have ally strips on the base road side protection


https://www.flickr.com/photos/exiledviking/35924813386/in/dateposted-public/

one of the four fins the kit still has a long way to go and is only in rough form at the moment still more cutting to do to accommodate the tow hitch and the pull down electrics .....


the kit put together mounts and some rear bumper to cut so this fits its not just for show it will be there with the help for some rear end down force ....

https://www.flickr.com/photos/exiledviking/35126283614/in/dateposted-public/

all the fitting nuts bolts will be done in Orange all but the ally scuff plate will be done in Hydro Dipped Carbon Fibre  Effect to see more pics  please click on the slide show below ;)


thanks for taking the time to look


Regards tony.c 

Still like the quality of your work Tony.

Well done.  :13:

Thanks Chris the front end bits are away for finishing that will be the nose cone /bumper done and then this kit will be sent off to have the hydro bits done will post some picks of it mock mounted up just making the  mounting brackets for it now and some cutting to be done one the lower old bumper


I have got some hight/reverse/front sensors to fit front and rear with a new screen just cos its all getting a little low now   :sign0135: yep another screen I am taking out the crash cameras  ??? ??? :icon_scratch: too replace them with another unit that looks and is better than the one I have this will be mounted behind the mirror .... then this screen will be mounted where the camera is now keeping it all tidy ....... ;)





(http://i32.photobucket.com/albums/d3/Tonyspictures1/detector/fullsizeoutput_a6e_zpsuuapbg32.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/detector/fullsizeoutput_a6e_zpsuuapbg32.jpeg.html)


this unit Below at the moment dose not support a rear camera how ever I have an Email back from the supplier that in september this unit will support a  unit attachment for a separate cam to the main unit as a completed package so this will replace my old unit


(http://i32.photobucket.com/albums/d3/Tonyspictures1/detector/fullsizeoutput_a70_zpszzggi1sf.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/detector/fullsizeoutput_a70_zpszzggi1sf.jpeg.html)

This Is Only A Mock Up Of the Defuser Fitting......So Made the Mounting brackets today and did a trial  Run Of the Rear Defuser still a long way to go but I think there going to be enough rear down force on the lower wings the defuser is not just for show and when completed will be finished of in a Carbon effect hydro Dip....

Also went with the double staggered wing  as there is enough air flow for this modding the rear bumper was 4  X 3/4 slots need to be cut but hardly noticeable....!

Thank for taking the time to Look....!


(http://i32.photobucket.com/albums/d3/Tonyspictures1/Rear%20Defuser%20Mod%202017/fullsizeoutput_a8b_zpssyjiuxnr.jpeg)[/URL



mock up brackets made but some adjustments to be done, all the aluminium to be coated black nuts and bolts also need to be done in Orange .... this is only a Mock up the finished effect will look a little different .


[URL=http://s32.photobucket.com/user/Tonyspictures1/media/Rear%20Defuser%20Mod%202017/fullsizeoutput_a8c_zpspgcgn37k.jpeg.html](http://i32.photobucket.com/albums/d3/Tonyspictures1/Rear%20Defuser%20Mod%202017/fullsizeoutput_a8c_zpspgcgn37k.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/Rear%20Defuser%20Mod%202017/fullsizeoutput_a8b_zpssyjiuxnr.jpeg.html)

As you can see the Defuser is mostly under the rear bumper & not protruding or extending the length of the body ...Also there no need to have it under the exhausts as they have there own air scoops



(http://i32.photobucket.com/albums/d3/Tonyspictures1/Rear%20Defuser%20Mod%202017/fullsizeoutput_a88_zpsln8pzyt2.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/Rear%20Defuser%20Mod%202017/fullsizeoutput_a88_zpsln8pzyt2.jpeg.html)

Looks awesome, I like it!  :sign0098:

Very trick  :bravo_2:

Likey  ;)

Thanks chaps for the feed Back it should look  :13: when I get the parts back from being Dipped..... just finished spraying up all the other parts and Brackets today ready for assembly.......


(http://i32.photobucket.com/albums/d3/Tonyspictures1/Rear%20Defuser%20Mod%202017/fullsizeoutput_a8f_zps0iurpg5x.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/Rear%20Defuser%20Mod%202017/fullsizeoutput_a8f_zps0iurpg5x.jpeg.html)


P.s getting the front end parts back next week so the front end build will be going on the car soon watch out for the pics..... ;)

well this new tool came in today a tool for the 8s toy box lol


(http://i32.photobucket.com/albums/d3/Tonyspictures1/RX%20Boot%20Space/fullsizeoutput_a92_zpsjjuv5f74.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/RX%20Boot%20Space/fullsizeoutput_a92_zpsjjuv5f74.jpeg.html)

Also my front end canards came back from wicked coatings


(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9504_zpsb67tvyjb.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9504_zpsb67tvyjb.jpg.html)


(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/fullsizeoutput_aa4_zpsaisfi1ye.jpeg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/fullsizeoutput_aa4_zpsaisfi1ye.jpeg.html)

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9778_zpseo2bjr8c.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9778_zpseo2bjr8c.jpg.html)

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9732_zpshar1ibr0.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9732_zpshar1ibr0.jpg.html)

(http://i32.photobucket.com/albums/d3/Tonyspictures1/Front%20End%20Two/IMG_9708_zpsoxzb0twq.jpg) (http://s32.photobucket.com/user/Tonyspictures1/media/Front%20End%20Two/IMG_9708_zpsoxzb0twq.jpg.html)

thanks for taking the time to look

That is so cool!!!  :great:

Just gets better and better  :great:

Great work Tony, they look fantastic  :13:

sorry folks the photo bucket a** holes have been at it again thinking I pay to post my pics there holding them for a payout but They can do one so I gone to flicker and now trying to post up some pics so its not me throwing my teddy's out of the pram photo bucket have deleted the pics and want £399.99 for a yeas subs will that went down like the titanic if they this there getting a penny they can think again ......

https://www.flickr.com/photos/exiledviking/35567873050/in/dateposted/

Thankfully you had copies to re-load, would have been so sad to loose the record of all the time and effort you put into this amazing machine  :great: 

So have I missed something?  Whats happening with Photopucket???

Lähetetty minun E2303 laitteesta Tapatalkilla

Photobucket have shot there legs off with an rpg....
Blocked all there 3rd party image hosting....unless you pay an annual subscription of £399.00 wrecked build threads and how to,s all round the world .....ducking funts is what they are....

Sent from my SM-N910F using Tapatalk

Damn...  ??? I quess I should change all my stuff away from Photobucket then too... Any recommendations to where?

I gone to flicker and have started transferring all my 2700 photos over from photo bucket.... photo bucket have asked why I am leaving and could I leave constructive comments so I told the 1st to Go forth, 2nd, and F**k write off you penny pinching *ucking Retards.... but some how this will fall on the deaf Ears....but at least I will not be Paying £399.99 for the privilege sorry about the blasphemy..... ;)

Hi all I been at it again fitted the rear Defuser  ;)



https://www.facebook.com/media/set/?set=a.351962078573473.1073741848.100012790506396&type=3  <----this should link you to the build





http://farm5.staticflickr.com/4417/36339897272_6163a7eea1_b.jpg    <----pick of the build


thanks for taking the time to look

Sorry chap the photobucket fails again will try direct link to my faceBook page


thanks for taking the time too look

   
The Link below takes you to my Face Book page a small slideshow of the front~end and Rear Defuser build

https://www.flickr.com/photos/92315849@N03/37196402024/in/dateposted-public/

https://www.facebook.com/profile.php?id=100012790506396    <---------click on this ....


thanks for taking the time to look

Great work Tony, as always, with lots of attention to detail  :13:

Awesome Tony....i dont know how you do it...i painted a rocker cover today...then got oil onit and stag well seal...looks a mess...but red so good for 10bhp.

Sent from my SM-N910F using Tapatalk

thanks chaps I think my mods are good for at least 5 BHP just cause i got so much down force LOL...

 :whoo: the best RX-8 in the land just got better  :great:

Thanks Clive just to say I on with the side skirts now just got the hand made pods for the back arch, back from dipping still some way to go here another link

https://www.facebook.com/photo.php?fbid=378906722545675&set=pcb.378906852545662&type=3&theater


they were made out of the back parcel shelf of a Vw and a ford shaped and bonded together...... the local scrap yards becoming a second home again!!




thanks for taking the time to look

just leave this here ;)


https://www.flickr.com/photos/92315849@N03/37436569094/in/dateposted-public/

just testing the photo bucket goggle fix seems to work

so a few pics of thew rear defuser and front bumper almost done new clutch fitted and underside done for the winter....

(https://image.ibb.co/mOoQMc/fullsizeoutput_f66.jpg)
(https://image.ibb.co/e8BHXH/IMG_0416.jpg)
(https://image.ibb.co/jHWUex/IMG_0414.jpg)
(https://image.ibb.co/hhQxzx/IMG_0304.jpg)
(https://image.ibb.co/i9Xo6c/IMG_0282.jpg)
(https://image.ibb.co/iCXMRc/IMG_0228.jpg)
(https://image.ibb.co/bLQVKx/IMG_0205.jpg)
(https://image.ibb.co/mue1Rc/IMG_0051.jpg)
(https://image.ibb.co/buLmsH/IMG_9940.jpg)
(https://image.ibb.co/jXV2XH/18891797_436394456726754_3687797858174396021_o.jpg)

thanks for taking the time to look just the side skirt mods to do now and the surrounds for the front DTRL lights a small interior mod post those pic when I get them back from dipping and fitted.......

 ??? Weird, those PhotoBucket pics aren't displaying for me on Chrome, but I've just checked a load of other PB linked photos in other threads on here and they are OK.

:banghead: :icon_scratch: :icon_scratch:

This all we see  :(

sorry all the photo bucket crap is not working so back to flicker again any way

like my new lazy way of jacking the car up on to the home made blocks just enough room to get under the car takes around 5/10 mins to set up and is safe on my gravel drive way battery/powered jacking  ;) ;)


(https://image.ibb.co/m1aAMc/fullsizeoutput_f77.jpg)

Cool...no huffing a puffing...i really want 1 of those car of the week sales ramps you used to see...just drive up it lol. Looked at lifts for the garage and just not enough height...
I got these...alright unless you need to take a wheel off and had to make extending ramps out of old deck boards.get pretty high. (https://uploads.tapatalk-cdn.com/20171201/ba34a528cbcc9f3568d531d187514456.jpg)

Sent from my SM-N910F using Tapatalk

Tony i just that photo straight on the tapatalk link...no image hosting...

Sent from my SM-N910F using Tapatalk

They look cool i looked at getting them but as you say no good if you need to work on the wheels plus I have the low front bumper... the two jacks I got where on a good sale price at a rated 3 ton each they work well i made a multi adaptor that clips on to the battery so both jacks can be operated at the same time I will post my link to face book to see if that works.....


https://www.facebook.com/photo.php?fbid=391452727957741&set=a.391452594624421.1073741851.100012790506396&type=3&theater   


click on the above to get the link hope it works  ;)

Theyve been in the garage 3 yrs..used once on westy...only recently dusted them off to put the scooby on as needed high to weld the blimin subframe for mot.
My eunos will be on them soon.

Sent from my SM-N910F using Tapatalk

Back with New Pics Now I found away to get them on to my Thread

Last Year after seeing so many car's with Rear lower defusers I had by this time taken a lot of photos of other Cars and came up with my Own Build out of aluminium and carbon Fibre Board got to cutting was the first stage............... sorry this is Pic Heavy


Cut your Parts Drill and a trail fitment


(https://image.ibb.co/mw3QMc/19466306_443901492642717_6556884463366034854_o.jpg)
(https://image.ibb.co/bVTmSH/fullsizeoutput_f75.jpg)
(https://image.ibb.co/mcgvMc/fullsizeoutput_f74.jpg)
(https://image.ibb.co/n1nD7H/IMG_9596.jpg)
(https://image.ibb.co/iNQN1c/fullsizeoutput_f70.jpg)
(https://image.ibb.co/cfeh1c/fullsizeoutput_f71.jpg)
(https://image.ibb.co/c86ZEx/IMG_9582.jpg)
(https://image.ibb.co/im0i7H/IMG_9552.jpg)
(https://image.ibb.co/hgBqnH/IMG_9551.jpg)



Send Parts Off For Carbon Fibre Hydro Dipping

(https://image.ibb.co/dBOs1c/fullsizeoutput_f73.jpg)
(https://image.ibb.co/im0i7H/IMG_9552.jpg)
(https://image.ibb.co/hgBqnH/IMG_9551.jpg)




Parts back from dipping assembly time I have Used tungsten and aluminium nuts and Bolts from PRO BOLT and other hand made parts shaped to what I needed to get the look the wing is adjustable to alter the Rake and Air Flow as part of the rear Bumper has been cut away

(https://image.ibb.co/fqcrux/fullsizeoutput_f6b.jpg)
(https://image.ibb.co/mcfuEx/IMG_9859.jpg)
(https://image.ibb.co/dcjbSH/IMG_9861.jpg)
(https://image.ibb.co/f3xkMc/fullsizeoutput_f6c.jpg)
(https://image.ibb.co/gFdgux/fullsizeoutput_f6d.jpg)
(https://image.ibb.co/kEkuEx/fullsizeoutput_f6e.jpg)
(https://image.ibb.co/i477Zx/fullsizeoutput_f6f.jpg)
(https://image.ibb.co/cis7Zx/IMG_9868.jpg)
(https://image.ibb.co/jsZX1c/IMG_9865.jpg)


(https://image.ibb.co/bDhczx/IMG_9905.jpg)
(https://image.ibb.co/dSsXXH/IMG_9901.jpg)
(https://image.ibb.co/fmGy6c/IMG_9900.jpg)
(https://image.ibb.co/j5by6c/IMG_9874.jpg)
(https://image.ibb.co/bXRLKx/IMG_9870.jpg)
(https://image.ibb.co/kMvfKx/IMG_9868.jpg)
(https://image.ibb.co/ieopCH/IMG_9866.jpg)
(https://image.ibb.co/fOqQmc/IMG_9864.jpg)
(https://image.ibb.co/mnqEex/IMG_9863.jpg)
(https://image.ibb.co/gee1Rc/IMG_9860.jpg)
(https://image.ibb.co/nuMgRc/IMG_9859.jpg)




fitted to the car its been one the car for around 9 months and I come to like it with the other mods I have done  :D

(https://image.ibb.co/jHWUex/IMG_0414.jpg)
(https://image.ibb.co/jFGFmc/IMG_0309.jpg)
(https://image.ibb.co/hhQxzx/IMG_0304.jpg)
(https://image.ibb.co/eyzCXH/IMG_0259.jpg)
(https://image.ibb.co/nhU7zx/IMG_9972.jpg)
(https://image.ibb.co/iFXSzx/IMG_9971.jpg)

(https://image.ibb.co/bE5xzx/IMG_9968.jpg)
(https://image.ibb.co/buLmsH/IMG_9940.jpg)


Thank you for taking the time to look ;)  NOT ON Face Book Any More ???

Wow, I shudder to think how many hours went into making that, the  >:D is in the detail and boy thats a lot of detail, well done  :sign0098:

Tony, fantastic to see you maintaining the high standard of work on your superb RX-8 project  :notworthy:

Wow...

Lähetetty minun E2303 laitteesta Tapatalkilla

Thanks guys this is an old mod but Now the controls are from the steering Wheel....

Hi all as some Members already Know I have Hid-away Number Plates that work form Remote Key Fobs so I had two key Fobs for the Front number plate with one of them i got the Idea of using the blank right cover on the steering wheel to house the remote and got hold of a second hand one to modify....also the Idea was to cover both covers left and right in the Carbon fibre effect hydro dip done by Wicked coating's of poole

so in picture form I got to it making the cut outs

(https://image.ibb.co/mVLEK7/IMG_8260_zpso6557k8l.jpg)

once happy with the cut outs then mixed some resin with a blue colour

when the Red led illumination comes on it is very bright so mixing the blue in with the resin this then tones down the lighting and you get a purple/blue/red mixture and is less blinding to the eyes at night 


(https://image.ibb.co/jrX8Bc/IMG_8304_zps8piumpos.jpg)
(https://image.ibb.co/exYFrc/IMG_8296_zpsaewbbh1v.jpg)
(https://image.ibb.co/mmeMWc/IMG_8290_zpsdupcghxj.jpg)
(https://image.ibb.co/j4ZYcH/IMG_8287_zpsinqslbwn.jpg)
(https://image.ibb.co/ew1eHH/IMG_8576_zpswyroo9vk.jpg)
(https://image.ibb.co/hcHarc/IMG_8559_zpsjqtuzmks.jpg)
(https://image.ibb.co/eQLvrc/IMG_8551_zpsyuypjuq4.jpg)
(https://image.ibb.co/hVkjjx/IMG_8550_zpsfetkupdq.jpg)
(https://image.ibb.co/nbtFrc/IMG_8544_zpsa6uoazik.jpg)
(https://image.ibb.co/j8WeHH/IMG_8314_zpsvz9bkmf4.jpg)
(https://image.ibb.co/j8WeHH/IMG_8314_zpsvz9bkmf4.jpg%5B/img%3Cbr%20/%3E%3Cbr%20/%3E%3Cbr%20/%3Ehttps://www.youtube.com/watch?v=DqZe4RBvlcs%3Cbr%20/%3E%3Cbr%20/%3EThen%20when%20happy%20the%20guts%20of%20the%20key%20fob%20fit %20in%20to%20the%20cover..then%20strip%20down%20and%20send%20off%20for%20coating%20take%20note%20you%20need%20to%20make%20the%20button%20controls%20around%201.5%20mm%20larger%20than%20you%20need%20as%20the%20hydro%20dipping%20will%20take%20up%20space%20if%20you%20do%20not%20do%20this%20then%20the%20operating%20buttons%20will%20stick%20on%20use%20.....%20rebuild%20the%20unit%20once%20back%20from%20covering%20%3Cbr%20/%3E%3Cbr%20/%3E%5Bimg%5Dhttps://image.ibb.co/jt9MWc/IMG_8588_zpsh6mtsgjl.jpg)
(https://image.ibb.co/eNKMWc/IMG_8585_zps8qwc3hdz.jpg)
(https://image.ibb.co/gQ0TBc/IMG_8584_zps8wcydxfb.jpg)
(https://image.ibb.co/mxO4jx/IMG_8594_zpsrbwtfdyw.jpg)
(https://image.ibb.co/j8u5rc/IMG_8603_zpsdbnlvjwe.jpg)
(https://image.ibb.co/dfYLPx/IMG_8601_zpsrutrcaq9.jpg)
(https://image.ibb.co/cHd9HH/IMG_8600_zps9bf1tixr.jpg)
(https://image.ibb.co/eBWDcH/IMG_8597_zpsmym8t6va.jpg)


https://www.youtube.com/watch?v=DqZe4RBvlcs   


https://www.youtube.com/watch?v=RTtrU5jxdjQ   Now all done from the steering wheel :D    quick vid of the effect  ;)

So if you got a gadget on a key fob that needs a home .........Happy Modding  :D



Thank you for taking the time to look

Next MOD ......... ;) ;) ;)

Hi back with another Mod build I needed to do this as the ATH hinsburger Front end although its good I needed to have some form of protection and make the front bumper more ridged...... I did not like the look of the splitter type ones you can buy and I need to make mine a three piece project .................


So take some 3.0 mm aluminium plate cut two pieces 120 cm x 25 cm

This allows you to make a curve once cut place the ally on the underside of the front bumper to mark out your mounting holes  and make a general shape then its back to the bench for moulding out with a hammer and files ... ;)  ;)


(https://image.ibb.co/ebD1Mn/IMG_9502.jpg)


once you got a rough shape the keep offering it up to the front bumper to make sure that you got the look you want I added a few bits of my own  see pics for some shaping I used chemical metal bond


(https://image.ibb.co/fJJ1Mn/19575304_446769509022582_6620539055548231048_o.jpg)
(https://image.ibb.co/cgUmnS/19575161_446769475689252_757844012995549231_o.jpg)
(https://image.ibb.co/f7exu7/fullsizeoutput_f84.jpg)
(https://image.ibb.co/kfeagn/IMG_9505_zpsgltfp11g.jpg)
(https://image.ibb.co/e5mz7S/IMG_9504_zpsb67tvyjb.jpg)


After your happy with your end result then bolt it up on the bumper to make sure you to canards/splitters look and have the same pitch then it was on to make the centre part this is made from a Ford focus front grill just cut it down and shaped it

(https://image.ibb.co/gzkLE7/fullsizeoutput_f7c.jpg)

Once I had done this I sent all the parts to Wicked Coatings Poole to  Cover the parts in Carbon fibre effect hydro Dip


(https://image.ibb.co/buUK7S/19466477_446766849022848_7873902014620530562_o.jpg)
(https://image.ibb.co/hot1Mn/19466531_446766762356190_5748952559431933897_o.jpg)
(https://image.ibb.co/nfKK7S/19264517_446766949022838_759271874118919872_o.jpg)
(https://image.ibb.co/ewjK7S/19477498_446766765689523_3943634025469329422_o.jpg)
(https://image.ibb.co/b1MMMn/fullsizeoutput_f81.jpg)
(https://image.ibb.co/gcjVE7/fullsizeoutput_f82.jpg)
(https://image.ibb.co/jyMtBc/19467879_446766902356176_9054496528330913063_o.jpg)
(https://image.ibb.co/bz6FPx/19468028_446766975689502_7351652647726297821_o.jpg)
(https://image.ibb.co/gV7N4x/19575026_446766889022844_5715681752451945130_o.jpg)
(https://image.ibb.co/m6Hpjx/19477355_446766969022836_7056802170606896465_o.jpg)
(https://image.ibb.co/iKmtBc/19466674_446766839022849_6636936057616145169_o.jpg)

Back from hydro dipping then i added some Edging of split Rubber and some Mesh wire grill



(https://image.ibb.co/mxBMMn/fullsizeoutput_f7d.jpg)
(https://image.ibb.co/dGTqE7/fullsizeoutput_f7e.jpg)
(https://image.ibb.co/dE9xu7/fullsizeoutput_f80.jpg)

Then just fitted the 3 pice kit to the car  I also made some strakes out of aluminium 7 mm X 15 mm shaped and drilled two threaded  rear mounting holes these have been placed just above the canard see photo,s


(https://image.ibb.co/eremnS/fullsizeoutput_f66.jpg)
(https://image.ibb.co/ffx6nS/IMG_0205.jpg)
(https://image.ibb.co/ninT1n/fullsizeoutput_f7b.jpg)


The finish touch was to use a thick layer of tiger seal the reason for this  if you shape the seal and make it flush it will then stop any grit leafs general road shit getting it and make it easier to clean

Ally cost                 Â£55.40

ford focus grill       Â£4.50

tiger seal               Â£  5.60

Split Rubber seal    £ 1.75

Mesh Grill              £2.20

Tools and time around 3 hours .......

Gas heat torch
Files
Saw
Rubber hammer
Drill
8mm Drill bit

Very happy this end product is the second set I have made  :lol:

         Thank You for Taking The Time To Look  ;)  ;)

Wow, thats really nice!  :sign0098:

sorry more later ;)

 quick update...well its time to start reassembly of the old girl spent yesterday fitting the new led light surrounds and today giving the engine bay a clean just got the rear end to rebuild over the next few weeks new rear bumper with an updated defuser and exhaust pods .....


(https://preview.ibb.co/cd5ujd/IMG_9170.jpg) (https://ibb.co/m949Hy)

Good to see you posting, tried to ring a couple of times lately to catch up. Cars looking as good as ever  ;)

Good two days work old stuff out front rear accident camera's out the New Road Angel ( good deal they dropped over £120.00 off there front and rear camera package with hard wire accessory and memory Card ) front & Rear camera's in also comes with recording when you left the car  ;)  Old TPMS out New TPMS in smaller screen and gives more  Accurately tyre data, New Roof carbon dipped console rear passenger light fitted ... side Air Dam skirts fitted.... sent off head restraint rotors & side skirt Ram Air vents off for dipping in C/F effect.... she's coming along but my sprayer's gone on his hols and I am still waiting for the rear end   :violent1: :violent1: :violent1: still hoping for the car on the road mid august ......... new face book page of the  new look build in august will post a link ......

She just keeps on getting better and better  :13:

Good work Tony, as always  :icon_thumleft:

thanks for the feed back  :13: another project done today pick Heavy  ;)

Roof console mod done and New tyre Pressure monitoring system In detects air leaks and tyre punctures valve faults with tyre temperature in psi and Bar as I run 245/35/18 run flats I also hooked in my iPhone music selector as its got 9,000 tunes in it / :lol: 

Also put my Laser detector on a magnetic mount


(https://preview.ibb.co/fbdshJ/IMG_1193.jpg) (https://ibb.co/g8DQ2J)
(https://preview.ibb.co/kAVSGd/IMG_1194.jpg) (https://ibb.co/gfSk2J)
(https://preview.ibb.co/deCk2J/fullsizeoutput_1023.jpg) (https://ibb.co/k7jb9y)


(https://preview.ibb.co/byBZwd/fullsizeoutput_ffc.jpg) (https://ibb.co/iYROpy)
(https://preview.ibb.co/mQpnGd/fullsizeoutput_101f.jpg) (https://ibb.co/frJgbd)


(https://preview.ibb.co/eVm1bd/IMG_1234.jpg) (https://ibb.co/jjPnGd)
(https://preview.ibb.co/hjBpUy/fullsizeoutput_101c.jpg) (https://ibb.co/bTpMbd)
(https://preview.ibb.co/kGgdNJ/fullsizeoutput_1035.jpg) (https://ibb.co/n4h7Gd)
(https://preview.ibb.co/fYfcGd/fullsizeoutput_1036.jpg) (https://ibb.co/mLtxGd)


(https://preview.ibb.co/f5Mjwd/fullsizeoutput_100f.jpg) (https://ibb.co/dYkBbd)
(https://preview.ibb.co/dX3Wbd/fullsizeoutput_1005.jpg) (https://ibb.co/joQzUy)
(https://preview.ibb.co/eNHPwd/fullsizeoutput_103a.jpg) (https://ibb.co/gnAzUy)
(https://preview.ibb.co/bFQuwd/fullsizeoutput_1008.jpg) (https://ibb.co/heUMbd)
(https://preview.ibb.co/bJV52J/IMG_1296.jpg) (https://ibb.co/bRD3py)
(https://preview.ibb.co/cUogbd/fullsizeoutput_100e.jpg) (https://ibb.co/ik99Uy)


thank you for taking the time to look ;)

Very neat idea and execution Tony, as always  :icon_thumleft:

 :eek: :sign0098:

 :bravo_2:

Just exelent! Looks like fricin space craft from future... those details, details...  amazing!

Lähetetty minun E2303 laitteesta Tapatalkilla

Thanks for the feed back chaps  :13: :13:

well been working on the side skirt extensions today almost done them just waiting for the aero scoop to come back from wicked coatings its being dipped in carbon effect to blend in with everything else, as these six bits have been hand made from SIDE SKIRTS SPLITTERS (GLOSS BLACK) FOR MAZDA 3 MPS MK1  you will know that there shape/and join lines  would not look right being one long part in fact they would never match up hence 3 parts with the mesh allowing the lines to look more aesthetic pleasing

(https://preview.ibb.co/dRa52J/IMG_1294.jpg) (https://ibb.co/bEQipy)
(https://preview.ibb.co/kwPhhJ/fullsizeoutput_103b.jpg) (https://ibb.co/eHtKUy)

(https://preview.ibb.co/homwQ8/fullsizeoutput_fd7.jpg) (https://ibb.co/ngyXyT)
(https://preview.ibb.co/noGocH/fullsizeoutput_f6a.jpg) (https://ibb.co/jNeVrc)

As this part of the build is not quite done I posted up a couple of teaser photos  >:D

Love what you keep doing to your car Tony :icon_thumleft:

thanks Nigel  ;) More bits Back from Dipping today the plastic Rotary inlay in the set head rest have been coated in Carbon effect gloss hydro dip and the last part of the side skirt aero scoops have been done tomorrow I will get them fitted and pic's posted up; thanks for taking the time to look ;)


(https://preview.ibb.co/fNUHWy/fullsizeoutput_106d.jpg) (https://ibb.co/ehBmPJ)


(https://preview.ibb.co/ifkPBy/fullsizeoutput_105e.jpg) (https://ibb.co/gFtpdd)


(https://preview.ibb.co/feW6ry/fullsizeoutput_1060.jpg) (https://ibb.co/fRpsWy)


(https://preview.ibb.co/kN21PJ/fullsizeoutput_106b.jpg) (https://ibb.co/dnnCWy)

Got these back from wicked Coatings yesterday day and fitted them into  the car to day just finishers the seat off for looks ;)

(https://preview.ibb.co/feW6ry/fullsizeoutput_1060.jpg) (https://ibb.co/fRpsWy)


(https://preview.ibb.co/ifkPBy/fullsizeoutput_105e.jpg) (https://ibb.co/gFtpdd)


(https://preview.ibb.co/kRdwuJ/fullsizeoutput_1071.jpg) (https://ibb.co/jdbS1y)



(https://preview.ibb.co/h9Z2ZJ/IMG_1419.jpg) (https://ibb.co/io9rTd)

thanks for taking the time to look      ( Mod Number ) 405 recorded .......

just a quick update on what i been up to.......


Time to up date the cooler space in the boot

the unit holds two bottles of wine and 4 tins beer or 5 tins of soft drinks with room for a few sandwiches  ;)

one frozen cool block will stay cold/frozen for around 8 hours any way it needed a tidy up and relining


(https://preview.ibb.co/eaEose/IMG_1902.jpg) (https://ibb.co/cnCKyK)

(https://preview.ibb.co/mhr1Ce/IMG_1900.jpg) (https://ibb.co/m50uXe)

(https://preview.ibb.co/kBquXe/IMG_1898.jpg) (https://ibb.co/eGuckz)

(https://preview.ibb.co/nCyRdK/IMG_1894.jpg) (https://ibb.co/b8Pckz)

(https://preview.ibb.co/kZkuXe/IMG_1880.jpg) (https://ibb.co/izReyK)

(https://preview.ibb.co/dcRjXe/IMG_1876.jpg) (https://ibb.co/mEPGdK)

(https://preview.ibb.co/k83nkz/fullsizeoutput_11aa.jpg) (https://ibb.co/fFqBCe)

(https://preview.ibb.co/fSZXJK/fullsizeoutput_11ac.jpg) (https://ibb.co/eJ8sJK)

bottom photo is just to show you where the cool space is located ........

(https://preview.ibb.co/n4MrF9/10947419_846494362085014_7220639078347941638_o_zpsmoehqmfw.jpg) (https://ibb.co/kXkJv9)         

thanks for taking the time to look  ;)  ;)


                                                           also done the last part of the headrest mod fitted the Inserts




(https://preview.ibb.co/c9etQz/IMG_1866.jpg) (https://ibb.co/jTTnkz)

(https://preview.ibb.co/gPyL5z/IMG_1861.jpg) (https://ibb.co/fjfpyK)

(https://preview.ibb.co/bAr7kz/IMG_1859.jpg) (https://ibb.co/gZvYQz)

Brilliant head rest motifs :great:

Just a little up date got to putting the Exhaust pods on today so another 48 hours and once the rear defuser is fitted tomorrow the Car will be Back on the Road first time in six months so looking for a nice sunday to get her out and clear the rotors out......... :13:


(https://i.ibb.co/LPttVbZ/IMG-2498.jpg) (https://ibb.co/dc22815)
(https://i.ibb.co/q5bDtGX/IMG-2494.jpg) (https://ibb.co/sHLg0Sk)
(https://i.ibb.co/dQTVVZ3/IMG-2461.jpg) (https://ibb.co/RCFss8M)
(https://i.ibb.co/kKF7PGH/IMG-2452.jpg) (https://ibb.co/ZdCjbfL)
(https://i.ibb.co/Dg2SDP1/IMG-2446.jpg) (https://ibb.co/M503Dyg)
(https://i.ibb.co/YjMFfxP/IMG-2441.jpg) (https://ibb.co/XJgrFqj)
(https://i.ibb.co/684nXkc/IMG-2393.jpg) (https://ibb.co/m0HDN3r)
(https://i.ibb.co/vmJFCHH/IMG-2389.jpg) (https://ibb.co/K79PcXX)
(https://i.ibb.co/gjnNN2w/IMG-2386.jpg) (https://ibb.co/xC4WWkG)
(https://i.ibb.co/jJFdrKN/IMG-2381.jpg) (https://ibb.co/kmFpSn7)
(https://i.ibb.co/MDy69z7/fullsizeoutput-13e9.jpg) (https://ibb.co/bgjJ74X)
(https://i.ibb.co/m8ZhNNp/IMG-2335.jpg) (https://ibb.co/bJwNbbt)
(https://i.ibb.co/7Wg1Y5h/IMG-2474.jpg) (https://ibb.co/nc3Lgvp)

thanks for taking the time to look

Now sold and new owner has blown it up ripped the electrical mods out and has problems do I help or leave well alone as all the problems he's caused my Partner says keep out of it and leave well alone :16: :16: :16:

What a shame, looked a fine machine, people gave no respect for all the efforts others put in.

If it was me I'd stay away, but I'm wired up that way..... If they had looked after it a bit better and it wasn't their fault, I may be sympathetic

Difficult 1 Tony. Chris is gonna track it as hes a track guy an therefore wants to simplify things and make his own...
Its was your baby and a show car id help him mate.
Just looks like he shorted summit out.
I wouldnt take in personally mate.

Sent from my SM-N950F using Tapatalk