I have decided to break my silver rx7 rather then fix the small 3/4 crash damage and other bodywork needs.
Engine not for sale, using that for another project, but everthing else is
Here is a list , need the the major things gone first before I start doing the smaller stuff, eg Apexi ECU, Intercooler, HKS T04E Full kit
Gearbox, syncros seem fine 160
Diff no whines 70
Rear Bins complete inc boot carpet 300
Headlight Covers each 75
Trust Intercooler with pipes 280
HKS TO4E Kit, Genuine HKS wastegate 50mm,downpipe,HKS manifold, needs a rebuild really as its starting to push a little oil 600
Quiet Exhaust but flows nicely 100
Decat with a small silencer 75
Apexi ECU 96 16 bit 450
Mazda RX7 RS 17inch Wheels 96+ 350
Wings 60 each
DM Motorsport red Alt/Water pump Pullys 50
Coils, no breakup, 50
Ast delete Filler neck 50
Headlights 60
Genuine 96 spec rear lights (round) 100
96 spec engine single turbo Loom 40
Brake calipers 150
Front Bumper 110
Parcel shelf 80
Bonnet 80
hatch 80
RE-A steering cowl boost gauge 120
Wheel Arch liners 70
Clocks white, unkown aftermarket dial covers 60
Seats 80
Door cards with intact handles each 80
Window switches each 50
Intake manifolds with block off plates 70
Throttle body with double throttle deleted 50
remember everything is plus P&P
Not a complete list , if anything you need ask, open to realistic offers, don\'t low ball me, been in the Rx7 scene for 12 years
Parts are sold as seen
will start to get pictures done
No dibs, money first talks
Would you consider selling complete?
07944945944
Thanks
Joe
Hi Dude its not complete, Engine missing, Turbo kit now missing (sold), Apexi ECU missing (sold). So as it stands I would consider 2k to take it away , but remember it does have have that damage, so dont think it presents as much as a deal for you, its worth more in parts I am afraid
Update : HKS Turbo kit is sold
Apexi ECU sold pending payment
interested in rear lights
Hi can you email me some pics of the clocks to amirs@hotmail.co.uk
If there in good condition I\'ll take them.
clocks are sold I am afraid
can you send me some pictures of the wheels? jurij.iljaz@um.si
Thanks.
Hi Marco
Have you got the transmission tunnel heat shielding, as I dumped mine when I went to side exit ..................... gone back to rear & it\'s getting FD:UKing hot in there!!
will have a look tomorrow for you dude
Can you ship to Norway? I am very interested in the rear bins. :)
it will cost you a lot of money to ship to Norway dude, probably £150 when I just did a quick quote estimating the weight and dimensions
Quote from: Pukka;880564Hi Marco
Have you got the transmission tunnel heat shielding, as I dumped mine when I went to side exit ..................... gone back to rear & it\'s getting FD:UKing hot in there!!
heat shielding is there will work out how to take it off next week, and work out a price
Do you have a standard rear bumper? If so how much with postage?
Quote from: BlitzBoy;880657heat shielding is there will work out how to take it off next week, and work out a price
Cheers Matey, See you at the Japshow Sunday :WaveBye
Quote from: Arnie;880668Do you have a standard rear bumper? If so how much with postage?
rear bumper damaged I am afraid , one of the reasons I am breaking the car
Quote from: Pukka;880669Cheers Matey, See you at the Japshow Sunday :WaveBye
cool you bringing the car see what she does on the strip?
Ok mate. Is the valance on the bottom of the rear bumper any good? That\'s the part I\'m actually after!!
will check it dude
Quote from: BlitzBoy;880656it will cost you a lot of money to ship to Norway dude, probably £150 when I just did a quick quote estimating the weight and dimensions
Well, I don\'t really have much of a choice if I want the rear bins, as there aren\'t any for sale in Norway.
But £150 is survivable, so I\'ll take the bins if possible.
They are complete? Like everything needed to replace the rear seats is there?
Best Regards
Morten
yes they have the divider, side panel are present
best email me on marcodeltoro@hotmail.co.uk
Is the dash in good condition and for sale? How much delivered IV30 1LU?
yes it is , only tiny bit of sticky glue residue where an rmagic holder used to sit, dash has no vents though, still interested?
Thanks - but no thanks, looking a good stock replacement
Might be interested in the intercooler, could I get a postage estimate to hilton Derbyshire please?
Is it front mount?
yes front mount TRust/Greddy 4 inch core, Postage and Packing will be £20 tracked
(http://i130.photobucket.com/albums/p261/marco72_album/Mobile%20Uploads/IMAG0648_zpsyc3thnui.jpg) (http://s130.photobucket.com/user/marco72_album/media/Mobile%20Uploads/IMAG0648_zpsyc3thnui.jpg.html)
(http://i130.photobucket.com/albums/p261/marco72_album/Mobile%20Uploads/IMAG0649_zpsesqvqthk.jpg) (http://s130.photobucket.com/user/marco72_album/media/Mobile%20Uploads/IMAG0649_zpsesqvqthk.jpg.html)
(http://i130.photobucket.com/albums/p261/marco72_album/Mobile%20Uploads/IMAG0650_zpshkyp3c4v.jpg) (http://s130.photobucket.com/user/marco72_album/media/Mobile%20Uploads/IMAG0650_zpshkyp3c4v.jpg.html)
(http://i130.photobucket.com/albums/p261/marco72_album/Mobile%20Uploads/IMAG0651_zpsdkjqsvdr.jpg) (http://s130.photobucket.com/user/marco72_album/media/Mobile%20Uploads/IMAG0651_zpsdkjqsvdr.jpg.html)
Any bad bits or in good condition?
good condition, a few bent fins of course, but it functions really well keeping intake temps down, better then any new ebay crap
What\'s the condition like, I can\'t tell from the photos. Cheers
Cheers (repeat post due to rubbish broadband)
more pictures of it as I said good condition only a few bents fins
(http://i130.photobucket.com/albums/p261/marco72_album/IMAG0741_zpswnmg48hs.jpg) (http://s130.photobucket.com/user/marco72_album/media/IMAG0741_zpswnmg48hs.jpg.html)
(http://i130.photobucket.com/albums/p261/marco72_album/IMAG0742_zpsm9xmm4x8.jpg) (http://s130.photobucket.com/user/marco72_album/media/IMAG0742_zpsm9xmm4x8.jpg.html)
I\'ll have it if you chuck the postage in free? :)
Do you have the engine for sale?
Quote from: Wasaaan;881176I\'ll have it if you chuck the postage in free? :)
sorry dude , its cheap as it is, £900 when it was brand new, had plenty of the same offer. I rather keep it and use on my rx2 project
Quote from: Dragun;881192Do you have the engine for sale?
afraid not, as it will be getting rebuilt as water seals went
Pm me then. £300 all in right?
yes dude £300 all in including tracked delivery, can\'t pm on here , email me on marcodeltoro@hotmail.co.uk
Intercooler sold to Wasaan:Thumbs-up
Hi mate, do you have pictures of the front bumper??
Front bumper is sold I am afraid
What condition are the rear lights in?
dibs on the following:
Genuine 96 spec rear lights (round) 100
96 spec engine single turbo Loom 40
Brake calipers 150
Door cards with intact handles each 80
could you send me some pics of these, please? the brakes are the 314mm versions, right?
As I said no dibs, first with the money
lights are in good nick will post pics only slight scratches on one side
Loom in sold
Brake calipers are stock size , they are not the RZ/RS size
Door cards already sold
hi im wanting the bonnet catch have you still got it?
sorry dude thats broken
(http://i130.photobucket.com/albums/p261/marco72_album/Mobile%20Uploads/IMAG0578_zpsxei2krkv.jpg) (http://s130.photobucket.com/user/marco72_album/media/Mobile%20Uploads/IMAG0578_zpsxei2krkv.jpg.html)
(http://i130.photobucket.com/albums/p261/marco72_album/Mobile%20Uploads/IMAG0597_zpsfjyaphqt.jpg) (http://s130.photobucket.com/user/marco72_album/media/Mobile%20Uploads/IMAG0597_zpsfjyaphqt.jpg.html)
email marcodeltoro@hotmail.co.uk for payment and delivery details
...if the center part is also included, i\'ll take it. :)
Doors, both? And Hatch?
I need a centre dash air vent, if you have one?
Thanks,
Matt.
Interested in the Ast delete & decat pipe, whats the internal diameter of the decat? Pics?
Evening mate, where are you located? May sort of looking for a gearbox if you've still got it?
Hi do you still have the exhaust? If so got any pics please?
Got any pics of the DM Motorsport pulleys, are they under driven?
Sent from my SM-G920F using Tapatalk
Do you have brake master cylinder and is exhaust still around
you got the heater panel ?? condition does not mind no need for the controls also
Verstuurd vanaf mijn SM-G925F met Tapatalk