Since im quite a new owner of the rx7 and have completely standard alloys i\'ve been trying to investigate what wheels are available for my fd. After a week of struggling finding what wheels are available for the fd that i like and are available in wider options i thought i would start this thread !
Please can people post what wheels they have (photo as well if possible). What size they are, what width tyres you have fit and what the offsets are. Any comment on quality of grip and ride would be great !
Has anybody got the racing hart alloys on their fd, if they make them for an fd !
As i said i have the standard fd alloys, with 225 width on front and back.
Shaun
Hi Shaun,
i have 17" Linea\'s on all round with the fronts set a t 255\'s and the rears at 265\'s and find the handling and grip excellant (yokohama tyres) not sure of offset though.??
Hi Sean,
You can get Racing Hart for the FD3S, up to 10" wide 18\'s on the rear but they are not cheap.
Regards
Phil
Not an FD but here are mine, Advan Oni\'s.
17 inch - not sure on off sets. Running with Dunlop formula R tyres - well grippy in the dry.
Mine came with 18 * 8.5 ET39 and 18 * 9.5 ET43 Mazdaspeed wheels. Tyres are 225/40 18 and 275/35 18 Bridgestones.
The ride is really rather poor, good grip in the dry, but virtually none whatsoever in the wet!
The front\'s will *just* touch the arch liners on hard turn and compression, such as turning into an uneven parking space
I could be wrong but I really don\'t think they are Mazdaspeed wheels. If they are ive never seen them. They are however Volk alloys, Volk make Mazdaspeed alloys but id say they just have a MS stiker put on them.
Nice wheeks all the same. :)
They are Volk Racing CV Pro. I have 8 of em!
Lee
Thanks for the clarification. They have Mazdaspeed on them, but could well have been produced by Volk. The Centrecaps have RAYS on them.
Silly question (OK embarassing question!)- do the centrecaps lever off? They seem very tight and didn\'t want to move. Thing is I need to replace those Bridgestones shortly....
Volk make the Mazdaspeed wheels anyway, but they are not Mazdaspeed. they are just CV Pros, but a very close design to the Mazdaspeed wheel.
You should have a centre cap remover to get the middle off, like a but nut. Mine was just in with the jack and stuff in the boot which was nice. If this fails, or doesnt get them off a big adjustable thing does the trick.
Lee
Those big nuts are hard to get off if you go for a dyno day matey
My Mazda speed alloys are just about to go for refurb. Where can I get the stickers to replace originals.
Are MS-02 alloys made by Volk too then ? They have RAYS on the centre cap and on the text between the studs.
Only seen three other cars with these on but one was black and silver, one was silver and silver. I guess there are some more around though, one in Lincoln from another post I think.
Mart.
I have a set of Volk Racing GT-7\'s
43 offset front and rear
8 x 18 inch front, 9 x 18 inch rear (would have liked an extra half inch on both)
Tyres are 235/40 x 18 and 265/35 x 18
Nice and light, only rub on mega compression circuits, lots of grip on Dunlop formula R tyres.
Vok/Rays are the same people. I think the proper name is Rays Engineering, with Volk being a subrand.
They actually make a lot of the Japanese wheels.
QuoteOriginally posted by eddicla
My Mazda speed alloys are just about to go for refurb. Where can I get the stickers to replace originals.
I\'m in a similar boat matey. Check out this thread (http://www.mazdarotaryclub.com/forums/showthread.php?s=&threadid=8278)
I have OZ split rims 235 on the front and 265 rear at 17".
Forgot to post pic :reallymad
AVS Model 5 Limited Edition 17" bright chrome.
Yokohama DNA Grand Prix ZR17\'s.
Fronts : 235x45
Rears : 255x40
Am looking into a brake system replacement and I am hoping these wheels have enough clearance!

Extra info here: -
http://www.urban.ne.jp/home/tiretown/WHEEL/MODEL5/MODEL5.html
oooooohhhhhh i wana join in, maybe later ;) lol
Si
Its amazing, what choice of wheels ! So there is some more options than i first thought !
Cheers Guys, keep the posts coming :)
Shaun
Theres loads of wheels, trouble is most of them will have to come from Japan making it either difficult or expensive or both.
Just have a look on the Rays site and youll see loads of different ones available, and thats just one manufacturer.
Lee
Get some mondeo wheels, hub covers like!!!!
Take a look at the Rays site matey.
link thingy (http://www.rayswheels.co.jp/emenu/wheel.html) My personal favorite has to the the Rays Genome "Drilled Shark" hahaha :rollin
Will post pics of my wheels too in about a week or so when they\'re back from refurb land, got a bit of rubber round \'em, and put them on the motor! :rolleyes:
Some nice wheels there Shark, the VICTRIC ones are a bit weird???
Volks challenge on mine 235/17/45 and 255/17/40...
QuoteOriginally posted by gsb876
Some nice wheels there Shark, the VICTRIC ones are a bit weird???
Yeah, I don;t see the point in buying alloys with so much surface area that they look like hubcaps. I mean think of the extra weight and time spent cleaning!?
intelleste 235/40/17 255/40/17 on mine
now that looks mean. What % tint are the windows?? Can you see out okay in the evenings/night time?
Won\'t tint my windows as when i had my skyline it was tinted and at night couldn\'t see fook all!!!!:confused:
But when you have a Jap double-DIN stereo with absolutely no security surely tinting your windows is the only security option ???
Your windows must\'ve been damn dark not to see anything at night !!!!!!:chat
Mart.
Yea they were dark as the skyline had a TV and dvd player screen so had to be dark to watch in the day. Peeled the rear tint off as could\'nt see anything behind me at night!!!:(
Check out \'Ultralites\' they make some nice and cheap wheels !!
Available from \'Pemberton Tyres\' in Wigan (Cheap plug for my local).
18" cost less than £150 each + vat + rubber
not sure what % of tint but i find it ok seeing through them on a night
did you buy your rx from milton keynes by any chance shark as i think yours is the one i looked at back in april but i took too long deciding
You coming to the Midlands meet Gaz??? You could hook up with Si and come up together???
-Sorry thread jack!!-:rolleyes:
pm ed you mate
Got it Gaz nice one;)
you talking about me behind my back? how rude

lol
Si
hi si i had concerns about sucking in mondeo fumes through the intake lol:rollin
no seriously didnt wanna hijack someones thread but i will be coming to the meet any luck with your fd making a apperance ?
QuoteOriginally posted by gaz1011
not sure what % of tint but i find it ok seeing through them on a night
did you buy your rx from milton keynes by any chance shark as i think yours is the one i looked at back in april but i took too long deciding

er...

bud. Glad you found another one... and a nice one at that!
no worries mate i must say yours did go well and stuck to the road as if on rails nice car shark
Cheers mate. got new bridgestone potenza\'s on the way to put on my new wheels when I get them back so it\'ll get even stickier soon !!!:D :D
These were on what I just sold - Blitz wheels + a set of new Falken Zeix tyres (255/40ZR17 rear and 235/45ZR17 front). Extremely sweet handling. Needed cleaning though.
(http://www.mazdarotaryclub.com/forums/attachment.php?s=&postid=61233)
The tint on Gaz\'s car is dark smoke all round, just thought i would let you know Gaz.
cheers john would you happen to know if its legal or not .
QuoteOriginally posted by gaz1011
cheers john would you happen to know if its legal or not .
Do what i did in the skyline, everytime you see a cop car put the windows down !!!!:rollin
strangley enough i do
GOOD man, as usually the cops will get suspect if they can\'t see whos driving:)
Hi Mate
No not legal on the drivers and passenger windows, but we all like to stretch the law occasionally right......
if it means streching the law for the price of looks so be it lol
(http://www.click-smilies.de/sammlung0304/auto/car-smiley-011.gif)
Gaz can i quote you on that if i turn up naked to tomorrows meet?

Si (what? i bet i look good el naturelle.....pmsl)
would this be appropiate (http://instagiber.net/smiliesdotcom/contrib/xerx/smileydavid.gif) :rollin
Don\'t give the scooban ideas man!!!
What time you coming down tomorrow gaz??? ring me if you get lost mate.
A38 - A50 - A514 (ring when here)
What a work of art man

lol
Si
QuoteOriginally posted by scooby_si
What a work of art man
lol
Si
This smiley\'s quite funny actually:rollin :rollin :rollin
you know you luv them all (http://instagiber.net/smiliesdotcom/contrib/dvv/uriel.gif) lol
Si