Dont really want to post this but i really don\'t have any time or space for this any more.
JDM S5 with chassis covering about 75000 miles.
I think its pretty good condition for age and underside looks pretty good.
Not spotted any obvious signs of rusting.
Brought in 2007 and personally covered about 3000 miles in uk and not used in winter.
Engine rebuilt By MAV tuning (Ben Lewis Mav on here) just over a year ago and done about 500 miles running in. Just rack up a few more miles then can go for mapping. Expect about 375bhp (fly, give or take 25bhp) at about .9 bar (rough estimate).
Resale values of after market parts alone (priced to sell) is well over £6k, not inc chassis, body and oem parts.
That gives you a bit of an indication to how much i\'ve put into her.
I don\'t expect to see this price but serious offers only.
Please don\'t bash this post about it not being worth £xxx etc as different people see things differently.
Bad points:
Exhaust needs a good clean out as oil built up from when the turbo oil seal went.
I think there is one leaky injector on top rail. Possibly cracked fuel feed line going to injector (not had time to investigate fully yet)
Needs a good clean on outside.
Thats the only things i can think of then ready to put through MOT. Has TAX til July 2014.
The engine is strong and starts 1st time, as expected from being freshly rebuilt.
I\'m sure there\'s more but i cant think of anything else for now.
Please feel free to ask any questions.
PS will not break the car as no time or space.
Spec list:
Intake / Exhaust:
HKS Green mushroom filter
HKS Super Sequential BOV
Custom V-mount (twin slim rad fans)
FD rad
Air pump, AFC & Split air deleted
HKS Manifold
3" Down pipe & "silenced" mid pipe
Screamer pipe
Kakimoto Exhaust
Engine:
Greddy compression tube
Rebuilt block (MAV tuning) covered 500 miles
FD corner seal springs
New Apex Tips
Pineapple racing HD water seals
T35 similar spec tub rebuilt w/ 360 thrust bearings and new oil seal
Greddy wastegate
GM 3 Bar MAP sensor
1680cc Bosch secondary injectors
SARD FPR w/gauge
Bosch 044 fuel pump
Twin Alt Pulley
Magnecore HT Leads
A/C deleted
Brakes:
Cusco BMC stopper
Groved brakes
Electronics:
Greddy Profec B spec II
AP Eng PFC & commander
Banzai Racing Harness
Beam Boy 8k HID
Earthing kit
Chassis / Transmission:
RE雨宮 coilovers (Height and dampening adjustable & adjustable top mounts)
Cusco front strut
Cusco rear strut
Feed \'B\' Pillar strut
Exidy organic clutch
Braided clutch lines
Yoko parada fronts
Toyo T1R rears
Yoko SA3R 17" 8j 9j
LSD (unknown, locks pretty quickly)
Interior:
RE雨宮 Steering wheel
Knight Sport Speedo in kmph
Greddy boost gauge
Short shift
Razo knob
Battery relocated to rear bin
Replace rear seats with bins
Efini III fixed bucket seats
Red flocked cluster surround
Red flocked front console
Carbon Fibre look instrument cluster face
Exterior:
Anniversary Racing Factory Aero wing mirrors
Corksport lip spoiler
RE雨宮 Side step (shine auto)
Attain Vented o/s headlight cover
VIS Racing Carbon Fibre hood
CFl look small gay wing
Respray white
RE雨宮 Rear spats
No sunroof (OEM)
Pics
(https://scontent-a-lhr.xx.fbcdn.net/hphotos-prn1/s720x720/75629_10151045158711825_472545495_n.jpg)
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn1/225966_10151044818266825_1478300126_n.jpg)
(https://scontent-b-lhr.xx.fbcdn.net/hphotos-ash3/248753_10150212039551825_778493_n.jpg)
looks a beast good luck with the sale !!
hi m8 if ever u do break ur fc : i would like the carbon bonnet, feed b pillar bar, efini bucket seat cheers mick 07894 707535
I\'ve not been on here for a long long time, didnt expect to see this!!!! :2eek
Any better pics of bodywork ? Also any of engine bay ?
And guideline price please :)
Also pics of underneath if possible !
Cheers :)
sucks that you have to sell mate. i finally dug out those indicators if you decide you want to keep it. good luck with the sale though.
whats the price
Like above can you pm me a price and also any additional pics of engine bay/underneath etc.
Thanks
hi, sorry guys been away and just got back.
can you drop me your emails so i can send you guys pics and prices etc.
rex7parts (at) google mail (dot) com [no spaces]
thanks
Quote from: AndyGen3;867634Any better pics of bodywork ? Also any of engine bay ?
And guideline price please :)
body work is good shape, bit dirty and needs a good wash and scrub.
only major bad point is the dent above the filler slap in the above pic.
drop me your email and i\'ll get more pics to you.
Quote from: tuner017;867830sucks that you have to sell mate. i finally dug out those indicators if you decide you want to keep it. good luck with the sale though.
better late than never hehe
how much for the indicators? if dont sell then will become a long term project :Giggle
Quote from: chrisJDM;867604I\'ve not been on here for a long long time, didnt expect to see this!!!! :2eek
sad times.. changing times.. but some girl should be happy i\'d swap carbon build up in engine for a rock made of carbon.
If only the carbon build up in rotaries turned into diamonds :Giggle
I don\'t know if its me but where\'s the asking price?? Generally helps with selling something
Beautiful FC... :)
Quote from: Grant Monkhouse;868508I don\'t know if its me but where\'s the asking price?? Generally helps with selling something
Agree with you but didn\'t put price up as trying to reduce the amount of people bashing on the price etc.
If i break it then Will see £6k (parts priced to sell) not inc chassis and oem parts.
So rough sell price would be looking a shade under this.
If i get offered half this value for example then i\'d be better off just stripping the main parts and selling them prob scrap the rest of gift the rest away.
Quote from: re japi;868523Beautiful FC... :)
Thanks :Thumbsup!
Quote from: mick choi;867319hi m8 if ever u do break ur fc : i would like the carbon bonnet, feed b pillar bar, efini bucket seat cheers mick 07894 707535 & how much for these items inc post if u break?? cheers mick
Hey sent you on an email can you confirm if you got it?
Thanks
Quote from: basch32;868859Hey sent you on an email can you confirm if you got it?
Thanks
Yiep, replied you :)
Shame to see this, but we all get to a stage where we need to have a change..
Quote from: LOLRich;868898Shame to see this, but we all get to a stage where we need to have a change..
i dont want to but other things have priority for now :\'(