For sale
1992 FD with Era ported Half bridge Borg Warner Single
Hey all. Time to put this up for sale. Have been building this( well Chris at Re:Worx has!) for the last year or so I guess. Had planned for excellent road car with about 400 horses, but actually made a bit of a monster! Its taxed, Tested and Mapped to 0.8Bar on low setting and 1.1Bar (well just under that but that’s close enough) High boost setting.
All the mapping is by Blitz and everything else put together by Chris (I cleaned it though).
So the spec
Fresh Complete external re-spray in original colour Classic Red
Rx-worx built Era ported Half bridge. Last comp test a year ago, done minimal mileage since, I think still bedding in! Front 7.0, 7.1, 7.0 Rear 6.9, 6.8, 6.9
NEW BW S366 done about 1000miles now
SS Manifold
NEW Wastegate - Greedy copy but holds boost perfectly
3 inch exhaust, Dragon silenced mid pipe, HUGE Apexi Back box. Lovely note to it especially when brapping
New Front mount (generic but flows really well)
Accel Ignition amp
New Coils
New leads
New 10s all round
Greddy elbow
Double butterfly removed
1680 secondaries, 550 primaries
Sard FPR
Walbro Fuel pump hard wired
NEW Battery re-located to boot
OMP removed â€" running pre-mix and comes with 20 litres of Shell VSX pre-mix
Air con removed
Tein Coilovers, height adjustable
Type RS 17s in BMW Marrakesh Brown
New discs and pads
ALL bushes replaced, including pillowballs (I think - certainly no knocks at all), with either polyurethane or OEM
Steering rack replaced
Power steering pump replaced
clutch slave and master cylinders replaced
Apexi PFC
Profec B spec 2 boost controller
Re-A Boost gauge
Turbo Timer (not conected)
Clifford alarm (in a box!)
Late spec plastics
carbon seats (on their way)
I will fit Suede Sparco wheel (BRAND NEW) and OIL temp and pressure, and water temp gauges for forum member, otherwise will come with them. Also Have New pulleys that will fit for forum member
Oh and did I say its taxed, tested and Mapped by Blitz 1.1 bar 534 FWHP 390 Lbs ft torque
Reason for selling? Well I still have another project on the go, and I need the space and the money to finish it. If I didn’t have anything else planned, it would staying with me without doubt.
Price £7750 ONO I’m in north Cornwall/Devon now so happy to meet people closer to civilisation if you are interested, and gives me excuses to drive it.
(http://i1117.photobucket.com/albums/k584/fd3scol/Snapbucket/099D52C9-orig_zps2e4c4b09.jpg) (http://s1117.photobucket.com/user/fd3scol/media/Snapbucket/099D52C9-orig_zps2e4c4b09.jpg.html)
(http://i1117.photobucket.com/albums/k584/fd3scol/Snapbucket/CDF587E8-orig_zps53206007.jpg) (http://s1117.photobucket.com/user/fd3scol/media/Snapbucket/CDF587E8-orig_zps53206007.jpg.html)
(http://i1117.photobucket.com/albums/k584/fd3scol/Snapbucket/EEC2241A-orig_zps7482fb56.jpg) (http://s1117.photobucket.com/user/fd3scol/media/Snapbucket/EEC2241A-orig_zps7482fb56.jpg.html)
(http://i1117.photobucket.com/albums/k584/fd3scol/Snapbucket/62385C8A-orig_zpsf4c93b0a.jpg) (http://s1117.photobucket.com/user/fd3scol/media/Snapbucket/62385C8A-orig_zpsf4c93b0a.jpg.html)
(http://s1117.photobucket.com/user/fd3scol/media/Snapbucket/432A9C4E-orig_zps0102a8c7.jpg.html)
Just thought would give this a little bump. I know its unlikely to sell to a fellow club member, but surely someone has a friend who is jealous of your rotary?!
Anyway still for sale :-(
Considered breaking it?? Looking for a new engine for mine.
Swap me your carbon strut brace for st. one? :mmmm
Quote from: rovers;863041Considered breaking it?? Looking for a new engine for mine.
well actually, if you paid £7750 for the engine, i\'ll throw the car in for free:D
Sorry mate, not a chance of breaking it!
Mr Carbon - Get Your own:p lol
looks beautiful mate
Quote from: kevheslop;863153looks beautiful mate
thanks buddy. You sure you dont need a half bridge in your life?
If this was on sale May next year, I\'d be picking up the phone. :(
I hope its not still for sale May next year, will really scupper my other build!!!
Will be on pistonheads, gumtree Possibly) and ebay from the weekend :-(
outta my price range bud atm :( glwts
Quote from: kevheslop;863497outta my price range bud atm :( glwts
There is an ONO after the price:yes
if you wanted to pop round just for a looksy then feel free buddy.
col
On pistonheads and ebay now with many more pics
Still for sale and PRICE DROP TO £6750
I have added a couple of vids showing cold and hot start etc.
http://s1117.photobucket.com/user/fd3scol/library/RX7%20Pictures
Think password needed so try forsale
I\'m away next few days so something to think about for anyone interested!
Have you got a headunit for the centre console? or something to fill it? lol.
Hey. I have put a carbon fibre plate in there now with a hole for an afr. I can add a head unit if it helps.
Col
Any pics of that? any other pics of bits that aren\'t in the add or photobucket can you email me heppy6590@hotmail.co.uk thanks :)
Email sent
Is this still for sale? I know the Ad is old!
nope. my pal from Shetland bought it.