Print Page - will this fit a 3rd gen FD

Title: will this fit a 3rd gen FD
Post by: olly on July 26, 2004, 03:49:16 PM

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=38786&item=7912793236&rd=1&ssPageName=WDVW

Any help is appreciated

Title: will this fit a 3rd gen FD
Post by: J4P RX on July 26, 2004, 03:51:04 PM

Im no expert at all, but I really cant see how it would fit.

Lee

Title: will this fit a 3rd gen FD
Post by: gsb876 on July 26, 2004, 05:20:24 PM

Best thing to do would be to investigate further b4 you bid, check with local exhaust centre or local car tuning place and see if they have any knowlegde on the matter, usually for a price anything is possible!!!:rolleyes:

Title: will this fit a 3rd gen FD
Post by: Fish on July 26, 2004, 06:46:22 PM

I doubt if it would, as most FD\'s have a tight S bend before the back box.

Fish

Title: will this fit a 3rd gen FD
Post by: MikeLMR on July 26, 2004, 06:49:59 PM

it might not last very long either, the exhaust from a rotary is hotter than most piston engines and a cheap exhaust silencer will not last very long.

Title: will this fit a 3rd gen FD
Post by: ROB..RX7UKFD on July 26, 2004, 09:30:37 PM

YEP looks like fake stuff ,cheap made ,dont do it ..check the size of the bore ..you can just see it ..pea shooter:bandit

Title: will this fit a 3rd gen FD
Post by: olly on July 26, 2004, 11:01:51 PM

cheers for the input chaps

Mazda Rotary Club

General => General Technical => Topic started by: olly on July 26, 2004, 03:49:16 PM