Print Page - Front Plate Turbo Oil feed fitting?

Title: Front Plate Turbo Oil feed fitting?
Post by: Grizzly on March 02, 2013, 08:06:00 PM

Hi all.

Two things..... First am i correct in saying the Oil feed fitting for the Turbo in the front Plate of the engine would be a M12x1.5 - -4 AN ?

Also Does anyone know where i can get hold of one made out of steel? i have done a bit of a search and short of shipping one over from the US which seems a little extreme i could only see Alloy fittings? (Don\'t really want to use an Alloy fitting as they don\'t give you any faith as you tighten them up)

Title: Front Plate Turbo Oil feed fitting?
Post by: philiwily on March 03, 2013, 02:34:38 PM

flowfit (http://www.flowfitonline.com/acatalog/Online_Catalogue_METRIC_MALE_1_5MM_PITCH_x_JIC_MALE_164.html) I get all my fittings from these chaps, quick delivery.
JIC 7/16 is industrial AN4.

Title: Front Plate Turbo Oil feed fitting?
Post by: Grizzly on March 04, 2013, 12:47:32 PM

Thanks for that...

Just for Reference it would appear its M14x1.5 - 7/16 adapter that\'s required on a Third Gen front plate for the Turbo oil feed. :)

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: Grizzly on March 02, 2013, 08:06:00 PM