Up for grabs are bits off my Rx. It\'s blown an apex seal so I have taken the engine out. Turns out an Apex seal on the front rotor fractured, its marked the rotor and housing.
Pretty much everything on the car thats for sale is Std.
The car was originally red but has been painted dark purple badly, except the bonnet which is metallic black.
Interior is in an ok condition. The dash has had something above the center vents stuck on it at some point. I think this would come off though if you were carefull. The instrument dome is cracked and pretty useless to everyone.
The car has a red std bumper on it now.
Its only been stood up for a couple of month and was all moted and on the road before that.
Wheel details are as follows
They are Enkei RP01
Fronts:- 17" x 8J ET38
Rear:- 17" x 9J ET38
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0185.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0182.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0187.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0176.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0215.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0304.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0229.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0842.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0840.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0839.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0838.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0837.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0834.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0833.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0832.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0827.jpg)
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0882.jpg)
Interior light. £20 posted.
Head lining plus sun visors in a really good condition. £60 plus postage.
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0875.jpg)
Rear boot side plastics. I also have the covers for the strut tops. £35 each plus postage.
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0873.jpg)
Boot lid trim. £30 plus postage.
(http://i1109.photobucket.com/albums/h433/whitevandan/Rx7/IMAG0869.jpg)
Rear seat side panels. Good condition but have some small marks. £25 each plus postage.
Items not for sale or have already gone are:-
Coilovers
Deep dish Omp steering wheel
Steering wheel boss
Pillar pods and gauges
Exhaust system
Airfilters and appropriate pipework
Diff
Gearbox
Starter
PPF
Clutch
Flywheel
Prop
Clutch and brake pedals
Clutch master, slave and pipework
Gearstick gator
N/S interior door handle
O/S cubby lid
99 spec front light
Headlight covers
Instrument cluster
Door triangles trim things
Demist vents
Fog light switch
Window switches
Glovebox
Scuttle trim
Wiper linkage
Rear washer bottle
Rear boot seal
O/S roof gutter trim
Overflow tank
Engine and all ancillaries
Battery clamp
Oil coolers and pipe work
Steering rack
Std front bumper
I will post items but may get expensive if we are talking about doors and stuff.
If you would like pictures I can post on here or email.
Anything you need give me a shout.
Cars located in Plymouth, Devon.
I will have another one day but sadly this one isn\'t going back on the road.
I\'m after a pair of rear alloys 17x9 only. If you find yourself happy to sell the rear pair ill be interested. I need them for drag tires cheers
Hiya. I\'m hunting for a pair of boot gas struts and a rear "Rx-7" badge. Can you help with these?
Is the blue bumper there still for sale?
How much for the offside light cover? Need one handy that its white too :)
How much for the red bumper ?
Hi do you still have the piece of plastic interior in front of the steering wheel above the dials(on top near the window) and how much if so?
Hi looking for a coolant overflow tank, oil pressure sensor, passanger headlight, drivers headlight cover white if possible, knee height drivers ducting that goes to vent, drivers side trim that covers screws for door mirror its a little black triangle.
hi man
looking for the inner small triangles left and right and for the outer ones over the side mirrors
do you have them - should be in good condition thx
let me know a price
hi do you have the following parts available?
Prop shaft with bolts,
Rear drive shafts,
Cluch master and slave with brackets hardpipe and fittings,
Diff to tranny support,
Starter motor bolts,
Battery hold down thingy with bent bolts that secures the battery.
im looking for a complete rx7 interior boot if you have this let me know
eplusz@gmail.com (eplusz@gmail.com)
Guy hasent been on the forum since the 24 of feb from what I can see....
I\'ll be breaking my car in a few weeks, modded single turbo \'95 RZ. Will be a thread going up but unless someone takes the whole car then everything will be available. Rough spec list:
Street-ported engine
Borg Warner S366 turbo
Powergains custom manifold and downpipe
HKS 50mm wastegate
Resonated de-cat midpipe
Custom titanium catback
Blitz V-mount intercooler
Koyo radiator
Greddy compression tube
Apexi power FC
AEM water injection system
Bosch 044 fuel pump
Braided engine bay fuel lines
Aeromotive FPR
AtomicRex secondary rail
Bosch 1680cc secondary injectors
HKS twinpower
Magnecor KV85 leads
Air con deleted
Air pump deleted
Twin oil coolers
IRP polyurethane engine mounts
P/S hard lines eliminated
B&M short shifter
DM Motorsport shift collar
Carbonetic 2 way carbon LSD
Mazdaspeed twin plate clutch with lightened flywheel
(not fitted) ATS carbon twin plate clutch
Goodridge braided brake lines
ABS deleted
Drilled and slotted discs with EBC redstuff pads
Superpro polybush kit
HSD Monopro coilovers
Desmond Regamaster wheels - 17x9 and 17x10 with r888 rubber, and a full set of all weather tyres (pirelli, falken)
AP racing 4 pot kit for the fronts (not fitted)
Mazdaspeed R spec front bumper and undertray
Mazdaspeed R spec rear bumper
Mazdaspeed diffuser
Mazdaspeed bumper projector lights
R Magic front wings
Smoked indicators
Mazdaspeed GTC rear wing
99 spec rear lights
Ganador mirrors
Mazdaspeed strut brace
Undersealed
Smoothed tailgate
Tow strap
Concept-7 sleek headlights
Viper 480XV alarm system
Mazdaspeed 300 km/h clocks
Bride Gias low max bucket seats
Re-Amemiya harness bar
Schroth harnesses
NRG thin quick release
Momo steering wheel
Mazdaspeed weighted gearknob
Silent coat soundproofing
Pioneer/Alpine sound system
Optima battery relocated to boot
Rear storage bins
Resonated de-cat midpipe
Custom titanium catback
Blitz V-mount intercooler
Koyo radiator
Apexi power FC
Bosch 044 fuel pump
Superpro polybush kit
HSD Monopro coilovers
AP racing 4 pot kit for the fronts (not fitted)
Concept-7 sleek headlights
Bride Gias low max bucket seats
Re-Amemiya harness bar
Schroth harnesses
Optima battery relocated to boot
Interested in those,would like to know price and some pics for them. where r u located? Do u also hv the aluminium AST? thx
Quote from: bmatharu;854004I\'ll be breaking my car in a few weeks, modded single turbo \'95 RZ. Will be a thread going up but unless someone takes the whole car then everything will be available. Rough spec list:
Street-ported engine
Borg Warner S366 turbo
Powergains custom manifold and downpipe
HKS 50mm wastegate
Resonated de-cat midpipe
Custom titanium catback
Blitz V-mount intercooler
Koyo radiator
Greddy compression tube
Apexi power FC
AEM water injection system
Bosch 044 fuel pump
Braided engine bay fuel lines
Aeromotive FPR
AtomicRex secondary rail
Bosch 1680cc secondary injectors
HKS twinpower
Magnecor KV85 leads
Air con deleted
Air pump deleted
Twin oil coolers
IRP polyurethane engine mounts
P/S hard lines eliminated
B&M short shifter
DM Motorsport shift collar
Carbonetic 2 way carbon LSD
Mazdaspeed twin plate clutch with lightened flywheel
(not fitted) ATS carbon twin plate clutch
Goodridge braided brake lines
ABS deleted
Drilled and slotted discs with EBC redstuff pads
Superpro polybush kit
HSD Monopro coilovers
Desmond Regamaster wheels - 17x9 and 17x10 with r888 rubber, and a full set of all weather tyres (pirelli, falken)
AP racing 4 pot kit for the fronts (not fitted)
Mazdaspeed R spec front bumper and undertray
Mazdaspeed R spec rear bumper
Mazdaspeed diffuser
Mazdaspeed bumper projector lights
R Magic front wings
Smoked indicators
Mazdaspeed GTC rear wing
99 spec rear lights
Ganador mirrors
Mazdaspeed strut brace
Undersealed
Smoothed tailgate
Tow strap
Concept-7 sleek headlights
Viper 480XV alarm system
Mazdaspeed 300 km/h clocks
Bride Gias low max bucket seats
Re-Amemiya harness bar
Schroth harnesses
NRG thin quick release
Momo steering wheel
Mazdaspeed weighted gearknob
Silent coat soundproofing
Pioneer/Alpine sound system
Optima battery relocated to boot
Rear storage bins
Hi mate do you have any pics and price in mind for the whole car
he has some piks on fduk buddy in the members car section. username is bally i believe
Thanks just seen it
Dont suppose you still have the passenger side OEM headlight cover?
Quote from: Neolad;851798Hiya. I\'m hunting for a pair of boot gas struts and a rear "Rx-7" badge. Can you help with these?
Hi, sorry for the very late reply. I still have the boot gas struts but can\'t help you with the badge.
£20 posted sound good if you still need them??
Dan
Quote from: jazraymcbeath;852215Hi looking for a coolant overflow tank, oil pressure sensor, passanger headlight, drivers headlight cover white if possible, knee height drivers ducting that goes to vent, drivers side trim that covers screws for door mirror its a little black triangle.
Very sorry for the late reply. I can supply the headlight, prob the ducting but will need a picture confirm really.
£50 for the headlight and vent posted. If you still need them.
front engine plate ok ?
Quote from: imiitek;859039front engine plate ok ?
Sorry, has gone mate.
price on the ganador mirrors?
interested in ap 4 pot brake kit
do you have the throttle damper?
Its the little round grey thing in this picture, in the bottom left just above the braided line... It unscrews, is about the size of a small ashtray or similar.
(http://www.reganrotaryracing.com/tbfinish.jpg)
email me carl.newton@logicalis.com if you have it please!
Hi r the front brake lines and the head light covers available please?
Sorry mate but the headlight covers have gone.
What do you mean by front brake lines? The hard pipes or the rubber flexi\'s??
Please Tx me on 07793776227 if I don\'t reply as for some reason it wont update me on the thread activity.
Quote from: omgj;865041Hi r the front brake lines and the head light covers available please?
hi mate, wondering what where you making with this borg warner set up? How did it spool up? Have you got dyno graph? Your help would be greatly appreciated , as i am after similar kit. Many thanks!
Bits still available on this
Price on both door cards complete screws switches etc evrything clips that hold in from other side
And glovebox with the bit the glivebox goes into with the clips and screws
Please O0
Front arch liners please - alex@savvides.org. Anyone??
How much for the 99+ spec front lights posted to dublin ireland?? Sean.mcgrory@hotmail.com
front bumper splitter?
How much?
hey there do you still have the front calipers.. im chasing set
cheers
bo0557 ( at) gmail.com
Hi there do you have the front bumper indicators/lamps still?
Hi
do you still have 99 rear lights? if so any pics / price? also are the clocks still for sale anda re they chrome or black rings please?
Thanks
Mark
Do you still have the ash tray?
Cheers Neil
Quote from: Rotary_Menace on April 09, 2015, 08:25:36 PM
Do you still have the ash tray?
Cheers Neil
The middle sliddy thing behind the brake handle