Print Page - "MOO" Sound

Title: "MOO" Sound
Post by: Jon_P on January 28, 2013, 06:43:12 AM

Ok, I have done a little more research into this so called "MOO" sound which I originally posted up about here (http://www.mazdarotaryclub.com/forums/showthread.php?t=78769). I have found out that it\'s this restrictor that goes into one of the pipes that connect into the A\'Pexi filters but I\'m unsure which one that is. It was not supplied with the kit I bought as it was second hand and was missing that restrictor and also 2 of 3 brackets too :(

Anyway, can I have some suggestions from people as to what I can make up to use as a restrictor to put in this pipe and also which pipe to put it in! The car has to stop mooing!! It\'s really starting to :censored::censored::censored::censored: me off now!!

Title: "MOO" Sound
Post by: The dutchman on January 28, 2013, 08:40:23 AM

I also wanna now it . Before i put my blitz intake on.
Good question jon-p :Thumbs-up

Title: "MOO" Sound
Post by: HaywardRotary on January 28, 2013, 10:04:33 AM

Its the one from the airpump.

Title: "MOO" Sound
Post by: Jon_P on January 28, 2013, 10:08:10 AM

Thanks Carl. What can I fabricate to put in it?

Title: "MOO" Sound
Post by: shaunwil on January 28, 2013, 06:33:42 PM

Any rubber or silicon hose the right size will do !

Shaun

Title: "MOO" Sound
Post by: Jon_P on January 28, 2013, 08:47:40 PM

Quote from: shaunwil;849132Any rubber or silicon hose the right size will do !

Shaun

I\'m assuming it just needs to be a solid piece and then drill a hole through it? Also, does it just have to be the right size so it fits in the pipe tightly?

Title: "MOO" Sound
Post by: shaunwil on January 28, 2013, 09:22:33 PM

Working off memory I\'m sure there is a point on the back of the filter to pickup the airpump. I\'m working off memory from 7yrs ago.

Having a quick look for images I\'m not sure what bits you have, heres a picture of a kit on ebay :

http://www.ebay.com/itm/Mazda-RX7-FD3S-Series-6-13B-Apexi-Twin-Turbo-Air-Intake-Filter-Kit-JDM-/140840950306?pt=AU_Car_Parts_Accessories&hash=item20cac65a22

Shaun

Title: "MOO" Sound
Post by: Clarky on January 28, 2013, 09:29:37 PM

Use a penny washer, or metal disc, tight fitting, ideally a 3mm hole

Title: "MOO" Sound
Post by: Bobbit on January 29, 2013, 01:32:47 PM

I just unplugged the air pump, white plug to the rear, right handside, made the car "pop" more often too which I like :Thumbsup!

Title: "MOO" Sound
Post by: Jon_P on January 30, 2013, 03:04:57 AM

Thanks guys. Seem to have sorted it now with the aid of a drilled rattle can nozzle top :) Appreciate all the help and tips!

Title: "MOO" Sound
Post by: The dutchman on February 03, 2013, 12:33:58 AM

I saw this picture on the Knightsports site.

(http://www.knightsports.com.au/rx7-fd/RX-7-FD3S_pic1_lge.jpg)

Title: "MOO" Sound
Post by: allrounda88 on February 03, 2013, 08:41:14 AM

i use these rubber plugs

if you buy a greddy kit the normally provide them

but here they are

cheap version

http://www.ebay.de/itm/160713491807?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1532wt_906

and the expensive one samco sport

http://www.sandtler24.de/deutsch/fahrzeugtechnik/kuehlsystemtechnik/samco-schlaeuche/samco-sport/verschlussstopfen

Title: "MOO" Sound
Post by: m1tch on February 03, 2013, 08:51:30 AM

Just keep the AMV?

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: Jon_P on January 28, 2013, 06:43:12 AM