All parts are in the NG9 area of Nottingham (east midlands).
Here we have for sale a perfect running 12A engine it is low mileage and shows no signs of wear to any components its an early engine and has better quality chrome on the housings as well as a slightly different inlet port shape i believe. I only removed the engine to fit a 12A turbo that i bought off here some months back. It comes with everything needed to just drop it in, connect up wiring and hoses etc and fire it up. Is currently fitted with standard gearbox which is also included, the gearbox is much higher mileage than the engine and takes its time to engage first and second gear, its still perfectly usable but not as good as new. £350
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_1190.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3372.jpg)
12A header well used but air tight and a good replacement for the original. £20
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3374.jpg)
Also as part of my clear out i have this 13B peripheral port its a home made engine and was made to be usable on the street so features slightly smaller inlets than some to reduce overlap. The irons have been altered quite a lot due to a completely different oil pressure system being used so might not be any use to others. The housings rotors and seals are mint with no signs of wear at all. Its fitted with a couple of Yamaha R1 carbs at the minute which was just a bit of an experiment and it did run on them but for simplicity a tried and tested Weber might be an easier option. £200
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3367.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3371.jpg)
FC N/A gearbox in good working order only real issue with the box is the threaded lug that the speedo cable screws into has a small piece missing but still works just fine. £20
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3366.jpg)
FC turbo (S5) gearbox removed from a japanese import which was a standard unmodified car and the gearbox seems to have been well looked after and is all in good working order. £60
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_1493.jpg)
FC turbo wiring loom and ECU taken from an S5 uncut and in good condition. £50
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3377.jpg)
Don\'t really want to list it all individually but if anyone needs any rotors housings, irons or engine ancillaries i\'v probably got what you need mostly FB and FC stuff.
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3388.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3387.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3386.jpg)
I will try and check this every few days so if you want a quicker reply please PM me a phone number. Cheers Alex.
Can I have dibs on the PP please. Can you put up your email (can\'t pm)
Sorry i didn\'t realize the PM function wasn\'t working my email is
rwd-pog@hotmail.co.uk
Give Tim at Rx motors a call I\'m site he will probably take most of your parts off your hands
can you give me a price on 2 turbo 2 rotors + del
and price each for decent 13b housings
you can mail me on columchadwick at hotmail.co.uk
cheers
c
Do you have a pair of 6mm apex, single side seal 12a rotors? If so can you mail on clintepps007@gmail.com
Cheers
is the S5 gearbox a manual or an auto ??
Price on FC 13b turbo rotors and housings to Ramon at Paxton dot co dot uk
Cheers.
Quote from: clint;839885Do you have a pair of 6mm apex, single side seal 12a rotors? If so can you mail on clintepps007@gmail.com
Cheers
I have a pair
Price on FC 13b turbo rotors and housings to Ramon at Paxton dot co dot uk
Cheers.
Dibs on the 12a headers please. Will send you an email
Cheers
Dave
All email addresses replied to.
Both gearboxes are manual.
First to pay or organise collection gets the parts i need to free up some space so can\'t hold onto things for people, sorry.
Have you any FC N/A Rotors ? Looking for a D weight. Also looking for a rear stationary gear too. If you have any good condition apex seals then that would be good too.
Shaun
Oh, and a crank for a FC N/A
Shaun
I don\'t have any N/A rotors unfortunately all Tii or FD. I think i\'v got a load of apex seals and springs but i can\'t remember the condition of them or if they are complete sets or not.
A choice of a few rear stationary gears again removed from Tii or FD.
I have a Tii E-shaft and an FD E-shaft.
Send me an email with a fair offer for the bits you want and i\'m sure we can sort something out. Cheers Alex.
hahahah exile swarmmmm
you got any good fd rotors + housings...
email sent
Quote from: KiwiDave;839906Dibs on the 12a headers please. Will send you an email
Cheers
Dave
How would you like payment? Will sort that first. Paypal ok?
Regards
Dave :wave
davidmackay007@yahoo.co.uk (davidmackay007@yahoo.co.uk)
Quote from: rwd-pog;839945I don\'t have any N/A rotors unfortunately all Tii or FD. I think i\'v got a load of apex seals and springs but i can\'t remember the condition of them or if they are complete sets or not.
A choice of a few rear stationary gears again removed from Tii or FD.
I have a Tii E-shaft and an FD E-shaft.
Send me an email with a fair offer for the bits you want and i\'m sure we can sort something out. Cheers Alex.
Going to see if I can get Grinders engine out of his garden and use some bits out of that. Cheers :D
Quote from: KiwiDave;840099How would you like payment? Will sort that first. Paypal ok?
Regards
Dave :wave
davidmackay007@yahoo.co.uk (davidmackay007@yahoo.co.uk)
Alex,
Paid via Paypal today
Thnx
Dave :)
Peripheral Port 13B sold to Hayden.
12A manifold sold to Dave.
Thanks guys for getting everything sorted out so quickly.
Sorry for the double post but here\'s a few more pictures of some of the other stuff i have for sale.
Compomotive split rims 4X110 PCD so would suit a lot of older mazdas they are 15 x 61/2 (backspace 4\'\') and 15 x 8 (backspace 4\'\') some have been stripped as i wanted to repaint the centre\'s to match the car but never got round to it.
£550 ono
(http://img854.imageshack.us/img854/5258/picture005vn.jpg)
(http://img515.imageshack.us/img515/4070/picture003qp.jpg)
MSD 6A multiple spark discharge unit, used but in good condition i can\'t find a picture at the minute but will sort one out if anyone\'s interested.
£100
Original single turbo from FC turbo ii S5 in extremely good condition with barely noticeable play in the shaft.
£100
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3407.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3406.jpg)
Double pass universal inter-cooler was fitted to a car but never actually used it as the car was broken for spares.
£50
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3382-1.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3381-1.jpg)
Got any waterseals?
No sorry mate.
Quote from: JTW86;841036Got any waterseals?
Mazda will sell you the waterseal kit. Prices aren\'t bad either.
how much for tii or fd e shaft?
Hello . Do you have the 12a engine for sale still ? I am interested , I can pick up , regards simon
Hi mate. Wondered whether this was still available? I realize you posted this a long time ago but I can hope lol
Cheers
Hi,
I\'m on Birmingham tomorrow and it\'s possible to come to buy the FC turbo (S5) gearbox removed from a japanese import ?
And it\'s possible to have the price of housing and rotor for FD and FC T2
Finally have you a rotor that the weight it\'s D for FD ?
Thank you for answering me by mail : e-husson@hotmail.fr or phone (sms) +33(0)6.88.99.33.54
Sebrx7
Wow these items were listed over a year ago :)
MSD ignition still available?
Quote from: rwd-pog on October 31, 2012, 11:09:57 AM
All parts are in the NG9 area of Nottingham (east midlands).
Here we have for sale a perfect running 12A engine it is low mileage and shows no signs of wear to any components its an early engine and has better quality chrome on the housings as well as a slightly different inlet port shape i believe. I only removed the engine to fit a 12A turbo that i bought off here some months back. It comes with everything needed to just drop it in, connect up wiring and hoses etc and fire it up. Is currently fitted with standard gearbox which is also included, the gearbox is much higher mileage than the engine and takes its time to engage first and second gear, its still perfectly usable but not as good as new. £350
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_1190.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3372.jpg)
12A header well used but air tight and a good replacement for the original. £20
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3374.jpg)
Also as part of my clear out i have this 13B peripheral port its a home made engine and was made to be usable on the street so features slightly smaller inlets than some to reduce overlap. The irons have been altered quite a lot due to a completely different oil pressure system being used so might not be any use to others. The housings rotors and seals are mint with no signs of wear at all. Its fitted with a couple of Yamaha R1 carbs at the minute which was just a bit of an experiment and it did run on them but for simplicity a tried and tested Weber might be an easier option. £200
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3367.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3371.jpg)
FC N/A gearbox in good working order only real issue with the box is the threaded lug that the speedo cable screws into has a small piece missing but still works just fine. £20
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3366.jpg)
FC turbo (S5) gearbox removed from a japanese import which was a standard unmodified car and the gearbox seems to have been well looked after and is all in good working order. £60
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_1493.jpg)
FC turbo wiring loom and ECU taken from an S5 uncut and in good condition. £50
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3377.jpg)
Don\'t really want to list it all individually but if anyone needs any rotors housings, irons or engine ancillaries i\'v probably got what you need mostly FB and FC stuff.
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3388.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3387.jpg)
(http://i685.photobucket.com/albums/vv214/rwd-pog/IMG_3386.jpg)
I will try and check this every few days so if you want a quicker reply please PM me a phone number. Cheers Alex.
Sent from my iPad using Tapatalk
Hi do you still have any mazda rx bits for sale I have just joined the Mazda forum I know it was years ago
Sent from my iPad using Tapatalk