Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: KaiserDamz on July 31, 2012, 10:21:31 PM

Title: clearance issue with bumpers
Post by: KaiserDamz on July 31, 2012, 10:21:31 PM
Hello, my current bumper has a slight flaw in that it hits off everything, speed bumps, ramps into car parks etc.  I\'m going to go replace the bumper some point soon but was curious if anyone else has had any problems with bumpers scraping off stuff
Title: clearance issue with bumpers
Post by: davehg on July 31, 2012, 10:51:57 PM
I\'d say your car is too low
Title: clearance issue with bumpers
Post by: probedb on August 01, 2012, 01:43:10 PM
Stick a picture up. How far off the ground is it from the bottom of the bumper?

Mine is quite low but I don\'t have issues, if I drive off a sleeping policeman full width bump then it\'ll hit the ground.

Adjustable suspension is also handy ;)
Title: clearance issue with bumpers
Post by: wolfie1 on August 01, 2012, 07:19:28 PM
i have an re amimeya front bumper and it doesnt catch on anything, as above your suspension is prob set too low
Title: clearance issue with bumpers
Post by: yehreally on August 01, 2012, 07:50:56 PM
get sparks from this setup.. or no movement at all :D