Print Page - anyone try this from ebay

Title: anyone try this from ebay
Post by: mowales81 on July 26, 2012, 09:12:56 PM

Hi I found this on eBay for 72Â£ really cheap so I don\'t know if anyone try it before for high power applications

Fuel Pressure Regulator Aeroquip Aeromotive Install Kit

Thanks

Title: anyone try this from ebay
Post by: m1tch on July 27, 2012, 12:21:18 AM

The Aeromotive FPR that I had in my FC was Â£250, each of the Aeroquip fittings were probably about Â£20 each or so, are you going to trust highly flamable fuel in the engine bay above the turbos to some cheap system that may leak and cause a fire? Is it worth the risk? There is a reason why fuel systems are expensive.

Title: anyone try this from ebay
Post by: mowales81 on July 27, 2012, 09:59:09 PM

So they are to risky to buy then,where I can get a genuine aeromotive with all fitting from?

Title: anyone try this from ebay
Post by: wolfie1 on July 27, 2012, 10:09:36 PM

these people http://injector-rehab.com/shop/home.php where i got mine from

Title: anyone try this from ebay
Post by: mowales81 on July 27, 2012, 10:30:22 PM

Thanks mate for the web site,is the FPR they sale genuine or not any idea?

Cheers

Title: anyone try this from ebay
Post by: wolfie1 on July 28, 2012, 12:02:42 AM

genuine, i bought fuel kit b for my fd, came with everything i needed

Title: anyone try this from ebay
Post by: mowales81 on July 28, 2012, 10:46:27 AM

Thanks mate I\'m gonna order one .

Title: anyone try this from ebay
Post by: wolfie1 on July 28, 2012, 12:43:09 PM

obviously you need to buy the air pump blanking kit seperate, underdrive kit and belt. dm motorsport do the blanking kit

Title: anyone try this from ebay
Post by: mowales81 on July 28, 2012, 01:36:01 PM

Ok and did you pay tax when the kit comes to the UK or not?
Cheers

Title: anyone try this from ebay
Post by: mowales81 on July 28, 2012, 01:39:38 PM

I have an air pump with belt already in my car not removed with air con to or you mean different one?

Title: anyone try this from ebay
Post by: mowales81 on July 28, 2012, 01:55:32 PM

Do you have an email wolfie I will send you a pic for the engine bay and have look if I need the blanking kit and air pump or not.
Cheers

Title: anyone try this from ebay
Post by: wolfie1 on July 28, 2012, 02:32:50 PM

its marksangster77 @live. co.uk (without the spaces) you will need to remove the air pump its the one on the left side of the engine looking at it from the front, you could do without the blanking kit and just put something in the pipes and block them but if your fitting bigger injectors you would be as well getting the blanking kit and fitting it since its in there beside the injectors. you would need a remap too and an aftermarket ecu, would prob be as well putting a freeflowing front pipe on and decat too, hayward rotary isint so far from swansea so he could remap it for you cause you dont want to run it on boost without the decat and frontpipe or it will overboost which is bad and it wont really rev above 4000 with bigger injectors in as there will be too much fuel and it will bog, for air pump removal you will need an overdrive kit which is a bigger alternator and water pump pulleys so the belt wont slip but you would prob be looking in the regions of 300-350 bhp with these mods

Title: anyone try this from ebay
Post by: mowales81 on July 28, 2012, 04:34:50 PM

Email sent mate with all details .cheers

Mazda Rotary Club

General => Rotary and General Chit-Chat => Topic started by: mowales81 on July 26, 2012, 09:12:56 PM