Print Page - How to tell if its a Turbo II

Title: How to tell if its a Turbo II
Post by: yellowmazdaman on July 12, 2004, 09:30:04 PM

I have found an engine in the junkyard by my house.But the owner doesn\'t remember what year of car it came from so I don\'t know if its a 13b Turbo 185hp or a 13b Turbo II 200hp.Can someone hepl me out?

Title: How to tell if its a Turbo II
Post by: deevious on July 13, 2004, 12:07:02 PM

The turbo is different, if it\'s still on. I\'d have to look up the specifics though as I don\'t know these by hart.
Also the intercooler on the 200bhp version is slightly larger, but you have to see the two side by side to see the difference.

there\'s actually quite a few differences in the ancilliaries. Easiest is to check a website that has all the technical data

Title: How to tell if its a Turbo II
Post by: 88GT-R on July 13, 2004, 08:42:40 PM

Hi
If the engine is on itÂ´s own, look at the elbow above the water pump. If it has a cap, it is an S4. If it is a solid black or silver elbow, it is an S5. Look at the air flow meter. Big and chunky=S4. Smaller and round/oval = S5.
Hope this helps. There is another thread with all of the differences. Do a search.

John
88 GT-R

Title: Re: How to tell if its a Turbo II
Post by: RexRyder on July 17, 2004, 09:55:59 PM

QuoteOriginally posted by yellowmazdaman
I have found an engine in the junkyard by my house.But the owner doesn\'t remember what year of car it came from so I don\'t know if its a 13b Turbo 185hp or a 13b Turbo II 200hp.Can someone hepl me out?

Actually both engines are Turbo II.

Title: How to tell if its a Turbo II
Post by: hIGGI on August 04, 2004, 10:45:32 PM

S4 13BT has knock sensor on center iron
S5 13BT has knock sensor on rotor housing

Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: yellowmazdaman on July 12, 2004, 09:30:04 PM