Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: Mark C on July 10, 2004, 10:47:30 AM

Title: Oil pressure
Post by: Mark C on July 10, 2004, 10:47:30 AM
Whats deemed to be a healthy oil pressure on a 92 rx7, i have 2?? pressure gauges on mine and both read around 3 KG/CM is this ok??

Mark
Title: Oil pressure
Post by: Gman on July 10, 2004, 11:03:32 AM
Stock oil guages on an FD are crap, they don\'t give you a proper reading, mine was at 0 when idling and just over half when on gas.

Go on what your aftermarket one says.
Title: Oil pressure
Post by: scooby_si on July 10, 2004, 12:11:45 PM
(Gman translation mode on) I have no idea whether that\'s healthy or not.....(http://www.click-smilies.de/sammlung0304/lachen/laughing-smiley-006.gif) lol
Si (helpful as usual sorry......(http://instagiber.net/smiliesdotcom/contrib/dvv/sconf.gif))
Title: Oil pressure
Post by: Carl on July 10, 2004, 01:12:46 PM
3 KG per CM is fine and healthy.
Kind regards
Carl
Title: Oil pressure
Post by: Mark C on July 10, 2004, 01:38:54 PM
Thanks for the replies people, I know what you mean about the standard one it does tend to be a bit erratic.

Glad it appears to be ok so why does the mazda one go so high if around 3 is normal?

Mark
Title: Oil pressure
Post by: Carl on July 10, 2004, 04:47:00 PM
4 kg is super healthy and like having all new components,that is why,but 3 kg is nothing to be concerned about.
Kind regards
Carl
Title: Oil pressure
Post by: Tintin on September 23, 2004, 08:04:24 PM
When I got my motor the standard gauge was showing 2 at idle but now it only seems to show around 1 , I check the oil every week and top it up ,

just checked it today as I\'d givin it some on the way home and it was still nearly full , I was expecting it to be quite a bit down as it usually is by the end of the week

Also seemed the power was a touch down but that could just be me getting more used to it

Can anyone shed some light on this , is it something to worry about or just the crappy standard gauge ?