OK I got this from the good old WWW its from an Efini RX7,
Its the Radio (Clarion without Bose thingy in the boot etc..)
Does ANYONE have an Idea as the the Polarity of the wires ?
Just got a mint Clarion head unit and want to convert the loom to ISO without spending extra cash on a crap lead....
10-wire connector:
==================
Red: Front Right door speaker
White: Front Right door speaker
Blue: Front Left door speaker
Green: Front Left door speaker
Grey/Black stripe: Could not trace - maybe front dash tweeter crossover
Red/Green: Instrument dimmer illumination connector
Green/Red: Aerial (Antenna) power lift feed
Black/Red: Could not trace - maybe front dash tweeter crossover
Blue/Red: 12v permanent supply
Blue/Black: 12v switched supply
5-wire connector:
=================
Yellow/Green: Rear Left speaker
Yellow/Blue: Rear Left speaker
White/Blue: Rear right speaker
Blue/Yellow: Rear right speaker
Beige (light brown): Could not trace
Spade connector
===============
Black: Negative Earth
Antenna connections for diversity system
========================================
Large socket: Main retractable aerial mast
Small socket: Rear window built-in aerial
:)
try this it may help you............
http://www.iluvmyrx7.com/3rdgen/manuals/93%20manual/(Z)Wiring_Diagram.pdf
shaQ
Thanks Shaq but thats no help I have the Mitchell CD and a copy of the Adobe document but there\'s no indication as to what wire is + and -
What a pain I didnt want to have to take apart the car :mad:
If it is the speakers you refer to, I have always believed it doesn\'t really matter, as long as you make sure that what you set as +ve and -ve is consistent across all the speakers. If not you get phasing errors.
Richard
at least i tried ! ;)
erm..
did your head unit not come with an ISO loom, my alpine came with one its just a matter of conecting it up.
shaQ
No it has the Standard Clarion ISO connector but the cars loom is not Iso standard as most cars of that era are. I had a look in Ha<:Prds but their connectors werw DIRE and far to bulky
Anyway I have the INfo from the WWW for future reference
10-wire connector:
==================
Red: Front Right door speaker +
White: Front Right door speaker -
Blue: Front Left door speaker -
Green: Front Left door speaker +
Grey/Black stripe: Could not trace - maybe front dash tweeter crossover
Red/Green: Instrument dimmer illumination connector
Green/Red: Aerial (Antenna) power lift feed
Black/Red: Could not trace - maybe front dash tweeter crossover
Blue/Red: 12v permanent supply
Blue/Black: 12v switched supply
5-wire connector:
=================
Yellow/Green: Rear Left speaker +
Yellow/Blue: Rear Left speaker -
White/Blue: Rear right speaker +
Blue/Yellow: Rear right speaker -
Beige (light brown): Could not trace
Cheers
:rollin :wave