Print Page - Engine damper Fitting

Title: Engine damper Fitting
Post by: C18WWN on April 28, 2012, 06:54:38 PM

Hi there chaps,
Just bought this damper, and haven\'t got a clue how to fit it

(http://img.photobucket.com/albums/v280/albinodub/2244b10d.jpg)

Is there a guide online anywhere?

Thanks

Title: Engine damper Fitting
Post by: C J R on April 28, 2012, 07:04:39 PM

All you have to do is mount the angle shaped bracket to the inner wing neaxt to the brake servo, (you will see the pre tapped holes just under the wing mounting). the damper fits above the servo unit.
The smaller bracket bolts to the back of the upper inlet manifold. Again you will see the two pre tapped holes.

Have a look at a few pictures with dampers fitted and you can work it out.

Ive attached a picture of mine.

Hope this helps.
Chris

Title: Engine damper Fitting
Post by: DJ Tommo on April 28, 2012, 07:33:02 PM

Another pic that might help...

(http://i607.photobucket.com/albums/tt154/gto_tom/1b4c98d4.jpg)

Title: Engine damper Fitting
Post by: wolfie1 on April 28, 2012, 09:39:53 PM

if you want more pics post up and i will give you some close up ones if you want

Title: Engine damper Fitting
Post by: C18WWN on April 29, 2012, 07:19:53 AM

Thanks guys

I\'ll give it a whirl in a few

Title: Engine damper Fitting
Post by: C18WWN on May 01, 2012, 07:42:38 PM

Piece of cake!!!

Cheers chaps, was expecting something a little more fiddely

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: C18WWN on April 28, 2012, 06:54:38 PM