Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: shaggysaurusrex on April 23, 2012, 01:40:54 PM

Title: Need my FD mapped!
Post by: shaggysaurusrex on April 23, 2012, 01:40:54 PM
Hi

I have just made a few mods to my 99 FD and need to get it mapped as soon as possible. It\'s currently on the apexi base map. I am based in Bristol so the closer the better.

Any suggestions?

Many thanks

Carl
Title: Need my FD mapped!
Post by: shaggysaurusrex on April 23, 2012, 01:43:10 PM
The spec is as follows:
1999 Mazda RX7.
Apexi Power FC and commander.
Later twin turbos and engine obviously still running sequential.
Blitz Nur Spec-r mid pipe and back box.
HKS down pipe.
Aeromotive FPR.
Bosch 1600cc secondary injectors.
Apexi twin intakes with hard piping.
Walbro 255L fuel pump.
Ceramic coated manifolds.
Front mount intercooler.
Magnecor 10mm ht leads.
Full pulley kit including air pump and aircon removal. NOT underdrive.
NGK BUR9EQP plugs all round

I know the general opinion about Walbro pumps but it was only put in as the original pump failed and i had it hanging about off an Impreza.
Title: Need my FD mapped!
Post by: SFW on April 23, 2012, 02:32:06 PM
go and see Carl @ Haywood Rotary!
Title: Need my FD mapped!
Post by: a.tapos on April 23, 2012, 02:59:03 PM
are you still running a cat?do you have a boost controller?
Title: Need my FD mapped!
Post by: shaggysaurusrex on April 24, 2012, 03:36:41 PM
I did speak to Carl Hayward about it a while back and have emailed him twice but heard nothing back as yet.   spec is as above.
Title: Need my FD mapped!
Post by: Ada7 on April 24, 2012, 06:59:53 PM
What model FD do you have. Only reason i ask is to give you some idea of which turbos you\'ll have. Not all \'99+ cars came with \'99 spec\' turbos.

Adam
Title: Need my FD mapped!
Post by: TRIND-FD on April 24, 2012, 09:02:24 PM
I hear and see great things about blitzboy on here, bbm
Try him,
Title: Need my FD mapped!
Post by: antrosser on May 09, 2012, 12:20:05 AM
I recommend MAV tuning in Stroud (Bisley). Nice guy in there :)
Title: Need my FD mapped!
Post by: antrosser on May 09, 2012, 12:20:42 AM
Blitzboy is good too :)
Title: Need my FD mapped!
Post by: L18M on May 10, 2012, 01:20:35 AM
Quote from: antrosser;822517I recommend MAV tuning in Stroud (Bisley). Nice guy in there :)

Didn\'t think Ben did mapping on customers cars?
Maybe i\'m wrong but any work required doing, he does a good job :)
Title: Need my FD mapped!
Post by: antrosser on May 10, 2012, 05:05:14 AM
He\'s in the middle of doing mine at the mo :) about £250 for a map
Title: Need my FD mapped!
Post by: davehg on May 10, 2012, 06:56:01 AM
Ant can you give me a txt please
Text only | Text with Images