Title: hurly
Post by: yonner on July 02, 2004, 10:11:49 PM
Post by: yonner on July 02, 2004, 10:11:49 PM
douse the hurley rebuild kit come with everythign or is it just all the gaskets and other boring stuff if so wahre can i get a full one that is top quality
Title: hurley
Post by: scooby_si on July 02, 2004, 10:33:18 PM
Post by: scooby_si on July 02, 2004, 10:33:18 PM
not that i\'m a spitful bitch or anything 
but i personally wouldn\'t touch anything hurley based......if they\'re the "The UK\'s Leading Rotary Engine Specialists" then i\'m a small bizarre dog called billabong 
Si (AKA the constand bitching X customer of
Hurley & certainly not "bilabong")
but i personally wouldn\'t touch anything hurley based......if they\'re the "The UK\'s Leading Rotary Engine Specialists" then i\'m a small bizarre dog called billabong Si (AKA the constand bitching X customer of
Hurley & certainly not "bilabong")
Title: Hurley kits
Post by: eddy doyle on July 02, 2004, 11:23:09 PM
Post by: eddy doyle on July 02, 2004, 11:23:09 PM
Hi,
I have rebuilted (5) RX7 engines with Hurley 3mm/2mm rebuild kits
and i am very happy with there service.
I have rebuilted (5) RX7 engines with Hurley 3mm/2mm rebuild kits
and i am very happy with there service.
Title: hurley
Post by: yonner on July 02, 2004, 11:37:10 PM
Post by: yonner on July 02, 2004, 11:37:10 PM
always thot u was a cat m8 but i supose i thot ren and stimpy we a monkey and a pice of toast when i was younger....... im shure many others still do :S
anyway is the hurly rebuild kit the full bunna or is it just gaskets and shite i also heard u guys sya a new rotor housign is 250 from mazda and hurly wants 600 :S
anyway is the hurly rebuild kit the full bunna or is it just gaskets and shite i also heard u guys sya a new rotor housign is 250 from mazda and hurly wants 600 :S
Title: hurley
Post by: iaint on July 03, 2004, 10:22:21 AM
Post by: iaint on July 03, 2004, 10:22:21 AM
For that money it\'ll just be the gaskets - not new housings (~600 for a pair normally I think), no new seals etc.
Problem is until you get the engine in pieces you don\'t know what needs replacing. I think the rebuilders usually reccomend replacing housings and seals as a minimum. Endplates can be skimmed once and reused.
I\'m sure Carl or Pip @ WGT would be prepared to source all the bits required for a rebuild but I don\'t think htey offer kits a s such.
Iain
Problem is until you get the engine in pieces you don\'t know what needs replacing. I think the rebuilders usually reccomend replacing housings and seals as a minimum. Endplates can be skimmed once and reused.
I\'m sure Carl or Pip @ WGT would be prepared to source all the bits required for a rebuild but I don\'t think htey offer kits a s such.
Iain
Title: hurley
Post by: yonner on July 03, 2004, 12:19:23 PM
Post by: yonner on July 03, 2004, 12:19:23 PM
yeh we are gona replace all the seals gaskets and rotor housings we are hoping to push 400 horses so we want it strong as for the sideplates we have a m8 who works for rolls roice maintaining jet engins he works the nightshift and on his breaks his boss dotn mind him using the machines u shud see some of the stuff this guy has came up with for us he machined a new crank shaft for my dads jag mk2 and made carbon fiber brake pistons for us :S im shure takign a mill of the side plates wont be any harm for him
Title: hurley
Post by: 20B_boy on July 03, 2004, 12:44:59 PM
Post by: 20B_boy on July 03, 2004, 12:44:59 PM
Take a mill off them and you can thru them in the bin :)
If they need work they should be lapped/ground.
If they need work they should be lapped/ground.
Title: hurley
Post by: yonner on July 03, 2004, 08:10:55 PM
Post by: yonner on July 03, 2004, 08:10:55 PM
yeh had words with the guy to day he says if the face is scarched we will surface face grind it and he did say a mill was masiv in his buisnes...................but they make jet engins :S
Title: hurley
Post by: MillSpeed on July 05, 2004, 11:44:17 AM
Post by: MillSpeed on July 05, 2004, 11:44:17 AM
I\'m still laughing at the "ren and stimpy being a monkey and a piece of toast" bit. What the f*ck are they anyway?
Title: hurley
Post by: scooby_si on July 05, 2004, 12:28:07 PM
Post by: scooby_si on July 05, 2004, 12:28:07 PM
Dunno but since seeing them do it it\'s been my goal in life to burp the getisburg address......:D But despite numerous crates of stella i have yet to come close...
Si (*boik*4 score &.....)
Si (*boik*4 score &.....)