I require ideally some bRaided brake hoses
And a ns front wing in good condition or a aftermarket front bumper which will hide the rust at the bottom of the wing
Quote from: the hat;808918I require ideally some bRaided brake hoses
And a ns front wing in good condition or a aftermarket front bumper which will hide the rust at the bottom of the wing
Shame you werent closer as you could of just had my EGI (minus engine which is coming out now) for £60
That\'s is crap pull the flexible hoses off and post them too me
blimey thats cheap .. i would have had that if you werent miles away ( although i think she might have killed me )
what are you doing with it
ohhh does it have a Y pipe on it ? ( exhaust )
why dont you break it for uber cheap money .. you get to learn how stuff comes off ( always handy ) and you will make more than £60 for it
you cant tell i might need some bits can you ;)
Grinder if mitch sorts that exhaust out for me I\'ll give you the y pipe from my egi for nothing just pay the postage
to be honest pal its not for me .. there is a user in blackpool and the exhausts have blown off
from speaking to him , and some pics , it looks like swapping the Y pipe could be the way forward ..
lets see what mitch sorts for you .. and i will direct the lad here ..he might drop you a few beer tokens aswell as postage :)
if you do brake it im in need of the tailgate badges.... been lookin for months
Well the guy could take the cat backsystem which has brand new tailbones for nothing tbh as ymthe will just end up in the skip if nobody wants them
Rising son I have tailgate badges
the standard FC ones ?, any chance i can buy em?
Yes I\'ll try get em
Off for you without braking them and let you know
Quote from: MrHanky;808930Shame you werent closer as you could of just had my EGI (minus engine which is coming out now) for £60
Dude, if you do break, I could really do with the full clutch cylinder setup if it\'s all good, and the power steering cooler if its not about to fall apart.
i was tempted by lots of the metal work underneath ( rear subframe , wish bones etc.. )
But not sure if they will fit a T2 or not ?
Basically have had an ultimatum to get rid of one of the EGI\'s for ages and now need it gone. Am just about ready to take engine out as I want to hang onto that.
Unfortunately time is a massive issue for me (hence why it has taken so long to get to where I am now). No time during the week because of work and no time at weekends as my wife works nights so whilst she sleeps I need to do jobs and look after the 3 little ones.
I will see what I can do with regards to any of the requests above as and when I next get a chance to go out and work on her.
Oh and there is no exhaust left as this one had RB system which has since moved onto my other EGI as the one that was on there fell to pieces :(
Skifle - if you could give me some info on where I might find these parts then I will see what I can do when work on the car again. Sorry but I am a mechanical numpty so know very little about cars unfortunately.
Thanks
Mark
a shame you are miles and miles away :(
i see your point now about having no time to break it
Grinder, if you are able to get it transported to you for a reasonable price I am prepared to give her away to the right person. Whilst I would not get my scrap money, at least she might be used to help some other members.
Mark
i reckon your the best part of 150 miles from me .. there is no way i can get it transported that cheap
and i really think she would batter me if i had 3 on the drive ( well i wouldnt as the drive wouldnt hold 3 cars ! LOL )
Yup 111 miles one way :(
lol, no worries Grinder. These women folk just dont appreciate the beauty of an old car sat on axle stands on driveway :)
Mark
well i have two on the drive at the mo .. and use neither of them .. so a third might be pushing it somewhat ! LOL
cheers hat, appreciated
the power steering cooler is a metal pipe that runs in front of the radiator and turns back on itself.
the clutch bits are on the bulkhead, i\'ll try and find some pictures.
You can bypass the pas cooler and it will be fine as if your not drifting etc it\'s not really gonna get hot enough too have problems
oh my goodness, i am blessed then! my missus dad owns his own garage so she thinks its perfectly normal to have a car sitting in bits in the drive, the only thing she is concerned about is the cat getting cut/stuck on it which of course never happens so all\'s good
I have the best missus as far as I\'m
Concerned as when I met her she had a ka now we have 3xfc3s an r33 and a mr2 a impreza turbo wagon and I\'m picking up a soarer tt on sat
im not rich enough to own that many cars! i have my vectra sri 150 that i use as my daily drive she has a 306 hdi and of course there is the rex, em do rc cars count? cause i have 15 of those!
now i bet thats a nice toy ;)
this is the pride of my rc fleet- (http://i848.photobucket.com/albums/ab48/wolfie1_bucket/blackout001.jpg)
its got a 30.5cc petrol engine, chokeless carb (better air flow), phat dad angled shred stack (makes the air flow better into the engine from the carb), a tuned pipe that i got custom made in the states (what a difference this made) i have changed the gearing in the final drive to make it faster since it now has more torque, changed over a lot of bits to anodised blue aluminium for strength, 2 20kg pushing strength steering servos and a few extra mods by me. i bought the thing for £600 and have prob spent about £600-£700 modifying it!
(http://i848.photobucket.com/albums/ab48/wolfie1_bucket/blackout002.jpg)
(http://i848.photobucket.com/albums/ab48/wolfie1_bucket/blackout007.jpg)
here is a short video of it in action, its about 2 1/2 feet long!
(http://i848.photobucket.com/albums/ab48/wolfie1_bucket/th_sonyphone130211005.jpg) (http://s848.photobucket.com/albums/ab48/wolfie1_bucket/?action=view¤t=sonyphone130211005.mp4)
Cool RC cars
Not showing my lad or he will be banging on about one of those next :)
Kim wanting a rc drift car if you have one of those fir sale lol
i got a nitro hpi porsche and an electric tamiya alfa romeo but they arent for sale, was always going to get a rx7 shell and paint it up like mine to put on the alfa, my nitro ducati motor bike drifts a bit too on cornering
Wolfie I have seen your rx now I think about it and I\'m sure I was driving my one at the time it loons like this
(http://i181.photobucket.com/albums/x278/thehat1984/7b4b4e53.jpg)
the hat : \'Kim wanting a rc drift car if you have one of those fir sale lol\'
ive got an electric hpi drift car that i may be willing to part with for the right amount??
Mmm how much as I\'ve already found a bn sports fc shell and work equip wheels
no, have never seen that, its def unmissable! i will be on the look out in future
the hat : \'Mmm how much as I\'ve already found a bn sports fc shell and work equip wheels\'
im always looking at 3 different rc rx7 fc shells but they cost like £40!
anyways if you email me dude i can give you a full spec list and price and some pictures :]
andrewbamford1@hotmail.com
you can even get different offset rims and widths and true to life tyre treads, i have a set of bridgestone potenza re11 tyres on what looks like bbs rims
oh and speaking of braided hoses... i\'m about to sort something out for my power steering cooler along these lines as i\'m pretty sure it\'d work... think along the lines of plumbing, more specifically, tap connectors...
Stu get in touch please :)