right i been meaning to get a build thread up for a while now so here it is as stands
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0619.jpg)
its been around quite alot but i plan on keeping it for a while even if i\'m broke at the end of every month because im filling it up all the time anyway here\'s a small spec list as it stands
Engine/Exhaust:
-Electric fan conversion
-EGR and PAS removed
-HKS mushroom filter
-Rotechniks twin exhaust system
-Twin downpipe
-Twin alternator pulley
Chassis/Suspension/Brakes:
-Tein coilovers
-Tein adjustable top mounts/camber plates
-4 pot front calipers
-Front and rear upper strut braces
-Goodridge braided brake lines
Exterior:
-TII skirts
-TII bonnet
-TII spoiler
-Modified \'widemouth\' EGI bumper
-Rays/Mazdaspeed MS01\'s
-TII/S5 rear lights
-Clear bumper indicator/sidelight clusters
-Sleepy headlight kit
-\'Player select\' JDM y0 wiper blank
- s13 front splitter
Interior:
-thrash garage racing bucket seat
-dildo gear knob
-sparco steering wheel
as soon as i got it first thing i done was get rid of the :censored::censored::censored::censored: alloy nuts get some steel ones on there and put a tidy stereo in the car(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0500.jpg)
next was the splitter gear knob and bucket seat il just post all the recent photos with this lot
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0533-1.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0526.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0503.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0636.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0525.jpg)
next up im going to be doing a full service plugs,oil,diff,trans flud and put some falkens i got up the garage
i was just curious as to what oil people recommend its currently running 10-40 mineral oil
an last of all i wast looking for some advice on the afm adjustment when the car went for the mot they said it was running rich and they adjusted it but after seeing some people say they run rich anyway i was just looking to see what it should be running at
Looking lovely!! :D Nice and tidy indeed! :Laugh
Looks in very nice condition inside and out, hows the underneath held up? Looks very well taken care of!
As for oil people will argue this amongst each other til they\'re blue in the face so take your pick, I use 10w40 mineral oil as well.
Are they WORKS alloys? Either way they really do suit the car very nicely, as does the S13 front splitter, seems a popular mod lately! :D
Also welcome :Laugh
Quote from: Lacey;792510Looking lovely!! :D Nice and tidy indeed! :Laugh
Looks in very nice condition inside and out, hows the underneath held up? Looks very well taken care of!
As for oil people will argue this amongst each other til they\'re blue in the face so take your pick, I use 10w40 mineral oil as well.
Are they WORKS alloys? Either way they really do suit the car very nicely, as does the S13 front splitter, seems a popular mod lately! :D
Also welcome :Laugh
ok the driver side rear arch needed a bit of welting done but other than that it really good
yeah i noticed that looking at the threads and mineral vs synthetic lol
don\'t now mate their just rays mazdaspeed ones
Quote from: aundre-3000;792512ok the driver side rear arch needed a bit of welting done but other than that it really good
yeah i noticed that looking at the threads and mineral vs synthetic lol
don\'t now mate their just rays mazdaspeed ones
Sounds like yours went in the same place mine has gone, maybe it\'s just an EGI thing to go on the back drivers arch, but none the less looks lovely! :Laugh
i remember seeing that car... cant remember where, pretty sure it was an advert, really like it!
Really like the look of this :)
Its Ginnai\'s old car. If you do a search on here you should be able to find his original build thread from about 3 years ago. Its a nice car mate. Shame its changed hands a fair bit over the last few years.
Ade
http://www.mazdarotaryclub.com/forums/showthread.php?t=59372
http://www.mazdarotaryclub.com/forums/showthread.php?t=54633
I like this car too, one of the best looking S4\'s around. Top work matey. Its amazing how much difference is made to the engine bay when changing the fan, can i see more engine bay pics please :)
ah this old slag. Been passed around a fair bit but it should be a good car still.
Good job on getting a splitter back on!
Loving the look of this! Where did you get the seat and rails from? Also, what spec are the wheels?
thanks for the comments guys
yeah i plan on keeping it for a while i can see why people buy them and then sell them the fuel consumption is really bad
@Tiddles thanks for them links mate
@B.martin sure mate here some more
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0646.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0647.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0504.jpg)
@ali303 i had the seat from stav on dw its from the sexy knights rx7 he\'s got.
i bought the seat rails from a member on here their r-magic ones touge distribution i think sell them
8j front and 9j back although i think they will look much better if i get them polished up the lips
Engine bay does look quite nice...but apart from being able to get to the engine better, is there any other benefits from an electric fan?
Quote from: aundre-3000;792731thanks for the comments guys
@ali303 i had the seat from stav on dw its from the sexy knights rx7 he\'s got.
i bought the seat rails from a member on here their r-magic ones touge distribution i think sell them
8j front and 9j back although i think they will look much better if i get them polished up the lips
Ah I thought so, thanks for the info dude. Any idea what the offsets of the wheels are?
small update just been taking some pics
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0661.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0659.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0654.jpg)
now winters here i fancied polishing up the lips on the mazdaspeed wheels
so i put some old wheels i had lying around on the mazda
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0664.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0669.jpg)
there\'s just some problems for me to do now there\'s some bad rust on the arches that needs looking plus its loosing brake fluid somewhere
My baby! Good to see it sporting a Status Error sticker! Miss this car soo much..
very nice ;)
Hey Gianni\'s back. Merry Christmas mate.
Ade
I like it, not usually into the 3 spoke style but that pulls it off... Probably because its an FC and its difficult to make it not look cool.
Merry Christmas Ade! I sold a car to Timmy last night who also bought this one off me a few years back and he was telling me it had a thread on here so I came on. Love the splitter!
I\'ve actually got an RX8 now ad never once thought to come on here! I alwas associate this place with RX7s.. Ill have a browse and hopefully stick around!
Good to see my old car though :)
Good to know mate. I\'m quite tempted by an RX8 myself cause it\'d be more family friendly then the FC. I can\'t bring myself to sell the FC though.
Ade
Dibs on your compression tube Ade ;)
thread bump
thanks for the comments guys
been busy over the last few weeks but had some tidy things over christmas
new jack its awesome :D been needing a new one for ages plus my old one wasn\'t low enough
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0750.jpg)
had some new stickers,a rebuilt kit for the rear calipers only needed the bush for the handbrake were it was leaking,harnesses and a quick release spacer (http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0751.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0755.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0761.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0760.jpg)
as you can see from the last pic the sound deadening is quite dirty so i guess thats the next job to get it all up
hopefully il get some tidy pics up soon but japfest is coming up soon and i want to get a some tidy pads and discs for it
Looking good! Is that a custom exhaust? Looks just how I\'d like one for my FC (small pipes, angled out and upwards on each side)
Quote from: ali303;806072Looking good! Is that a custom exhaust? Looks just how I\'d like one for my FC (small pipes, angled out and upwards on each side)
couldn\'t tell you tbh i think its a rotechniks one but im not sure if they do them anymore
just a little update
rust it getting worse
headlights stopped working
mpg is ridiculous
and ive got no money but other than that all is well :D
been quite busy this last month skiing etc but couldn\'t wait to drive the rx so soon as i got home i took it for a good drive up some mountain passes and took some good pics
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0816.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0813.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0812.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0805.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0806.jpg)
and even sheep like rx7\'s haha
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0801.jpg)
anyone got a idea on how to fix rubbish back lights on the dials
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0819.jpg)
Quote from: aundre-3000;813663just a little update
rust it getting worse
headlights stopped working
mpg is ridiculous
and ive got no money but other than that all is well :D
Welcome to RX-7 ownership :D
She looks nice though mate, maybe look into getting the car undersealed. The sooner you \'stop the rot\' the better, headlights I\'m sure is a quick fix. You have to persevere with egi ownership the mpg is quite bad with them, no one will deny that they are a whole in your pocket for a daily driver!
You could think about transplanting an RX-8 engine into it, slightly better mpg and it will be faster and with 6 gears depending on the model, give one of the tuners a call find some prices. A renesis engined egi would be pretty cool actually, I\'ve now sent myself down a trail of thought that could be Interesting :Giggle
Quote from: B.Martin;813672Welcome to RX-7 ownership :D
She looks nice though mate, maybe look into getting the car undersealed. The sooner you \'stop the rot\' the better, headlights I\'m sure is a quick fix. You have to persevere with egi ownership the mpg is quite bad with them, no one will deny that they are a whole in your pocket for a daily driver!
You could think about transplanting an RX-8 engine into it, slightly better mpg and it will be faster and with 6 gears depending on the model, give one of the tuners a call find some prices. A renesis engined egi would be pretty cool actually, I\'ve now sent myself down a trail of thought that could be Interesting :Giggle
Carl mentioned it on one of the threads. The Renesis is enginered to be more civilised... so gives you more scope for tuning within certain regulations (noise/emmissions/etc).
I\'ve just pm\'d him about it, I\'ll let you know what he says. I think I want one when I get back to the uk :D
Quote from: B.Martin;813672Welcome to RX-7 ownership :D
She looks nice though mate, maybe look into getting the car undersealed. The sooner you \'stop the rot\' the better, headlights I\'m sure is a quick fix. You have to persevere with egi ownership the mpg is quite bad with them, no one will deny that they are a whole in your pocket for a daily driver!
You could think about transplanting an RX-8 engine into it, slightly better mpg and it will be faster and with 6 gears depending on the model, give one of the tuners a call find some prices. A renesis engined egi would be pretty cool actually, I\'ve now sent myself down a trail of thought that could be Interesting :Giggle
i think it was undersealed by the previous owner but its the rust on the arches at the moment it take a pic its really bad at the moment il take a pic when i get a chance but i\'m looking to get the shine auto rear spats soon
if i do change the engine it will probably the a 13b turbo lump going in to it
but it wont be anytime soon as i cant afford it yet once im in the raf i\'ll have to get another car for getting back and forth and the mazda won\'t be my daily driver the so it could be the perfect opportunity to get it done then
whats wrong with the headlights? if its the relay i have 1 here you can have foc
ur cars stunning! love those wheels !
Not sure mate thanks for the offer il let you now if i need one
What ones the three spokes or the rays? The three spokes are for sale if your intrested
with regards to the lights behind the dials, it probably a bulb out. you\'ll need to remove the cluster from the dash and i think the bulbs are in a twist lock holder. you should be able to get them from you local motor factors
Quote from: turbointhebrain;813996with regards to the lights behind the dials, it probably a bulb out. you\'ll need to remove the cluster from the dash and i think the bulbs are in a twist lock holder. you should be able to get them from you local motor factors
sounds like too much hard work for me il leave it as it is haha
as it was the nicest day we\'ve had in a while today i thought id clean the ms01\'s and polish the lips now hopefully most of the nasty weather had gone away il get them back on in the next week
before
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0838.jpg)
after
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0841.jpg)
there\'s quite a big difference its just a pain to polish between the wheel bolts but there\'s no point in taking them all apart so it will do for now
im looking for some new pads and discs soon any recommendations?
pads wise ive been looking to get carbone lorraine rc5\'s but finding the proper fitment seems to be a pain im not sure if they even do fc pads but alot of people have said they are rather awesome.
discs wise i have no idea ive seen the black diamond ones but the do seem pricey.
what pads/disc combo are you guys running.
Looks good, get some pics when fitted :)
riiiight with japfest coming up ive desided to get the car sorted but i aint got long so will be busy for the next month:Thumbs-up
been busy buying new pads and discs along with some bits for a good service
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0935.jpg)
brakes wise i got some brembo discs for the front and rears for quite a good price from ap brake discs
the price of black diamond and ebc stuff was stupidly priced compared to the brembo ones and tbh ebc hasn\'t got the best rep
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0940.jpg)
pads wise i got some mintex ones for the rear and some carbone lorraine
rc5+ pads for the front been hearing good things
about them and the apparently for the price they are awesome so il let you now how they are
service wise i\'m just going for a oil change, plugs, trans fluid and coolant flush
so next week the pads and discs will be going on which reminds
me that the car is leaking fluid again from where the handbrake cable enters the caliper :mad:
other than that last thing to do would be to lower the rear and sort the rust out on the rear arches il get a pic tmorow of the rust its got
rather bad over the winter
so got some pics of the rust that badly needs addressing
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0968.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0967.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0966.jpg)
as you can see not great :(
plus just got a pic confirming that the caliper is leaking again
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0973.jpg)
on another note was a lovely day in south wales and decided to go out
with my uncle green laning with the bonkas 4x4 club was a awesome day
and im already looking for a 4x4 i wont be selling the rx for one thou haha
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0948.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0956.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0963.jpg)
Nice to see some of the random stickers I put on it survived! Glad to see it\'s still being loved, I miss this car. Get the rust sorted when you can, I always thought it was the only real thing letting the car down. This car was always good to me :)
Have you tried whacking (nicely :Hammer) the dash above the dials? I think the lights on the bottom corner went out once or twice when I had it and some good \'percussive maintenance\' sorted it!
haha great post,love the pics love the look of your car, tip from me to you do, dont underseal it,
Quote from: haywes;820568Nice to see some of the random stickers I put on it survived! Glad to see it\'s still being loved, I miss this car. Get the rust sorted when you can, I always thought it was the only real thing letting the car down. This car was always good to me :)
Have you tried whacking (nicely :Hammer) the dash above the dials? I think the lights on the bottom corner went out once or twice when I had it and some good \'percussive maintenance\' sorted it!
hi mate was you the guy who took it around combe that i pmd on driftworks a while ago
yeah it will be getting done soon hopefully before japfest
they are ok now but if it happens again il give it a whack haha
update timeeeee
only 8 days till japfest and got quite a bit to do heres the list
change the pads and discs
oil change/filter
change the transmission fluid
flush the coolant
sort the arches out
get the alignment done
swap the wheels and tires over
ive just done the oil change so thats done
but ive been having huge problems with getting the discs off the hub
started last week got the caliper off etc but to the screws out but
even when i was hitting it with a sledge hammer it wouldn\'t
come off next up we got a blow torch and heated it up and it still wouldn\'t come off
so in the end we gave up on that put the disc back on the car so i could at least drive the car
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0990.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0988.jpg)
after that i decided to fix the leaking rear caliper turns out it was the seal on the hand brake mechanism as you can see its fubard in the rend we just done a full rebuilt on the caliper
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0984.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_0996.jpg)
i love this car! glad shes still alive and getting treated well, looks awesome
thanks mate
told you lot i would busy so i started on thursday this time we took the hub off with the disc got the sledge out again and it still wouldn\'t budge you
can see in the pic were we broke the breeze block we were hitting it so hard
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1028.jpg)
next up i took it to the local garage monkeys were they had a 30 ton press
and guess what it still wouldn\'t even budge with 30 tones of pressure on it!!
gave up again and had another crack at it yesterday with a angle grinder
and it came off and tbh i\'m not surprised it wouldn\'t come off with sledge hammer heres the pics
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1029.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1030.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1034.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1047.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1037.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1044.jpg)
as you can see the disc was a mess. all that was holding it in was the corrosion behind the hub are the hub was on gave it a good clean
with a wire brush and it looked like new.
so now the carbone loraine pads are in there and they are the muts nuts absolutely awesome brake super hard straight away and feel sharp as soon as you touch the brake pedal couldn\'t recommend them enough
next up i will be attacking the rear discs getting the new pads in and bleeding the whole system with some new fluid
hey guys sad to say but this will be my last post for a long time not only because the cars failed its mot :( but also im joining the raf tomorrow and im starting my basic training for 9 weeks
so back to the car at the moment its sorned because its failed its mot on welding its it going to a good garage of a friend his work there is very good here\'s the web site
http://www.oldschoolengineering.co.uk/
so back to japfest i had a awesome time the car rocked was quicker than i expected passing some rx-8\'s even though im in a s4 egi
(http://i770.photobucket.com/albums/xx343/aundre-3000/Picture10-2.png)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1108.jpg)
just after that i changed both rear calipers and discs
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1133-2.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1129-1.jpg)
next up the lights stopped working again this time the connectors were some how just destroyed so just had 3 large connectors they worked fine i didnt get a picture unfortunately by the time realised the light was all put back together and i cba to take it all apart again haha
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1142.jpg)
lastly here\'s the pictures of the rust thats getting repaired
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1240.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1241.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1242.jpg)
i was toying with the idea of doing the rear subframe at the same time but i think i just going to get it on the road till i get another car and i can concentrate on all the running gear
and to top the day off i smashed my splitter coming down a hill and had to do a emergency zip tie repair
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1247.jpg)
lastly i just came back for the nurburgring and its was nuts i hired a car from rsr and i cant wait to take the mazda there so im planning to go there in the next few months
(http://i770.photobucket.com/albums/xx343/aundre-3000/72783.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/73690.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/Picture4.png)
ohh just forgot to add the horn didnt work on the car to i had my mate re solder the cpu
best part is the mot guy didnt even test the horn haha
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1233.jpg)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1234.jpg)
My baby! It\'s so good to see the effort that is still going into this car! I do miss it a lot.
Glad to see another FC is putting a smile on someones face despite a few niggles...! :Thumbsup!
Man I miss this car so much, I still love it! This car never ceased to make me smile when I owned it, and I had it on Castle Combe too! Managed to keep up with some cars I really didn\'t expect, and overtake a few ;] I came up and had a chat with you at the last Japfest as well, was ace to see it again.
Glad to see you\'re taking care of it mate, it\'s a keeper. Keep the updates coming, It\'ll look amazing when that arch rust is gone!
Big thread update soon it\'s been mot\'d and passed and is back on the road :):)
congrats on the MOT
Thanks for linking me to this thread , looks you had miles more fun with the disc than I had
I didn\'t want to grind mine off , just incase I wrecked the hub
I still need to get my disc back on .. and then see what the other side is like !1
Quote from: grinder;860415congrats on the MOT
Thanks for linking me to this thread , looks you had miles more fun with the disc than I had
I didn\'t want to grind mine off , just incase I wrecked the hub
I still need to get my disc back on .. and then see what the other side is like !1
Yeah cheers took 400 quids worth of welding though :(
I had to call dad in aswell hahah
It should the fine to put it back on I can\'t remember any problems
Yeah no doubt the other side is just as bad :(
400 ouch .. least mine was only £200 for welding , but it needs MOT\'ing around .. around now-ish but not sure when
Thanks for the comment about the other side :( LOL
Gonna try and get the drivers side built back up over the weekend , should only take me about 20 mins to get it all back on .. then need to figure out how to bleed it all
Quote from: grinder;860434400 ouch .. least mine was only £200 for welding , but it needs MOT\'ing around .. around now-ish but not sure when
Thanks for the comment about the other side :( LOL
Gonna try and get the drivers side built back up over the weekend , should only take me about 20 mins to get it all back on .. then need to figure out how to bleed it all
Never now you might be Luckyer than Bruce willis and it will be ok haha
Yeah should be a easy compared to taking it off
Just be carefull bleeding them not to round the nipples like me hahaha
ive checked the nipples whilst the caliper is on the bench and they are OK :D
One thing I didn\'t need in my life was an image of Grinder \'checking\' his nipples on the bench :rollin
Right so thus is my first proper update on the car for a year now a lots happened since then I\'ve joined up to the raf had another rx7 sold it and now drive a mini jcw
So after the white fc failed its mot I needed a car and saw this black jdm fc on here it was half bridge ported mint to be honest no rust and amazing spec for the price I paid
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1751.jpg) (http://s770.photobucket.com/user/aundre-3000/media/IMG_1751.jpg.html)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1754.jpg) (http://s770.photobucket.com/user/aundre-3000/media/IMG_1754.jpg.html)
(http://i770.photobucket.com/albums/xx343/aundre-3000/IMG_1725.jpg) (http://s770.photobucket.com/user/aundre-3000/media/IMG_1725.jpg.html)
I ended up selling it due do the horrendous mpg and the fact I was doing to many miles in it so I sold it but kept the wheels
So then I bought this
(http://i770.photobucket.com/albums/xx343/aundre-3000/image_zps2222d073.jpg) (http://s770.photobucket.com/user/aundre-3000/media/image_zps2222d073.jpg.html)
It\'s a 2009 r56 John cooper works mini 211bhp ish
Come April it was time to get the white fc back on the road originally for japfest so I got it all welded up and mot\'d but I didn\'t realise it clashed with the the raf karting champs but at least it\'s in the road I\'m looking and doing a track day before the end of the year
(http://i770.photobucket.com/albums/xx343/aundre-3000/image_zpsdd9aec40.jpg) (http://s770.photobucket.com/user/aundre-3000/media/image_zpsdd9aec40.jpg.html)
(http://i770.photobucket.com/albums/xx343/aundre-3000/image_zps3cb777e6.jpg) (http://s770.photobucket.com/user/aundre-3000/media/image_zps3cb777e6.jpg.html)
Update soon good news though it\'s passed it\'s mot :) no advisories either !
Will be at japfest this year doing some track time :)