Text only | Text with Images

Mazda Rotary Club

General => General Technical => Wheels & Tyres, Suspension & Brakes => Topic started by: StreetracerHCI on October 02, 2011, 02:59:50 PM

Title: Brakes front Upgrade: 294x22mm to Type RS 314x32mm what I need
Post by: StreetracerHCI on October 02, 2011, 02:59:50 PM
hi guys, my car does not brake as well, I have to change the brakes as soon as possible.
 I was thinking about performing this upgrade.
 please give me some advice?
Title: Brakes front Upgrade: 294x22mm to Type RS 314x32mm what I need
Post by: m1tch on October 02, 2011, 03:25:58 PM
The OEM brakes are good as they are 4 pot brakes, its best to change brake pads, change the brake fluid and then replace the spongey rubber hoses for braided lines
Title: Brakes front Upgrade: 294x22mm to Type RS 314x32mm what I need
Post by: StreetracerHCI on October 02, 2011, 04:21:42 PM
yes mitch, but i need the new rotor disk :) I wanted to see if I can use 314x32 or if I need to make changes to suit :D
Title: Brakes front Upgrade: 294x22mm to Type RS 314x32mm what I need
Post by: Speedline Imports on October 02, 2011, 04:36:58 PM
You will need the RS/RZ calipers to use the bigger discs.  Pads are the same.
Title: Brakes front Upgrade: 294x22mm to Type RS 314x32mm what I need
Post by: StreetracerHCI on October 02, 2011, 04:39:36 PM
thx mate :)
Title: Brakes front Upgrade: 294x22mm to Type RS 314x32mm what I need
Post by: cona2k on January 14, 2012, 09:01:57 PM
im in same boat as you mate. i also been looking at the brake stoppers what is supposed to be a slight improvement
Title: Brakes front Upgrade: 294x22mm to Type RS 314x32mm what I need
Post by: Black7Conv on January 17, 2012, 01:05:34 AM
me too mate. I found out that the kouki 99+ front and rear brake rotors can be fitted if you use the front calipers and the rear support mounting. But, the cost of that change is the same like changing front and rear brakes with a multi pot kit..so it is up to you.
Text only | Text with Images