Print Page - Injector help fd

Title: Injector help fd
Post by: merlin2002 on September 20, 2011, 08:23:26 AM

Need a bit of help here!
My primary injector seals are foobard
Now am I correct in saying
There\'s the injector diffusor then a o ring on top of that and finally a bigger o ring?
If anyone knows the part numbers?
Also need part number for the metal isolator/spacer that sits under the 2 bolt holes as all I have there is 2 washers
Thanks
Rob

Title: Injector help fd
Post by: StreetracerHCI on September 20, 2011, 10:09:38 AM

(http://www.rotaryart.uk.com/acatalog/InjectorOringSmall-150.jpg)
see what you need exactly
You can find everything you need here http://www.rotaryart.uk.com/acatalog/New_Mazda_RX7_3rd_gen_engine_perf_tuning.html

Title: Injector help fd
Post by: davehg on September 22, 2011, 11:27:49 AM

the primary injctors have a diffuser that come with the seals attached as one piece, there is then a large seal that sits around the injector that slides into the top of the centre plate.

Title: Injector help fd
Post by: merlin2002 on September 22, 2011, 11:45:34 AM

Oh ok, on rotryart website it shows a seal on top of the injector between the diffuser and the injector?
Thanks
Rob

Title: Injector help fd
Post by: merlin2002 on September 27, 2011, 02:56:54 PM

Quote from: davehg;789844the primary injctors have a diffuser that come with the seals attached as one piece, there is then a large seal that sits around the injector that slides into the top of the centre plate.

Can anyone else confirm this!
Just rotaryart do list a small seal on top of the diffuser? But I didn\'t have one?
Thanks
Rob

Title: Injector help fd
Post by: Ada7 on September 27, 2011, 03:08:42 PM

Rob give the guys at Reworx a cal, they\'ll be able to help you out :)
l
Adam

Mazda Rotary Club

General => General Technical => Topic started by: merlin2002 on September 20, 2011, 08:23:26 AM