Mazda Rotary Club

General => General Technical => Topic started by: Mikey22 on September 10, 2011, 09:50:06 PM

Title: Scotland Tuners
Post by: Mikey22 on September 10, 2011, 09:50:06 PM
Anyone know any tuners in scotland that are able to do Apexi fc remaps?
 
Cheers
Title: Scotland Tuners
Post by: wolfie1 on September 10, 2011, 09:59:22 PM
i think wallace performance in aberdeen can do them, but when i got mine done i went to see carl at hayward rotary
Title: Scotland Tuners
Post by: clive on September 10, 2011, 10:14:31 PM
Not sure if thgis helps but there was a Garage called "the Garage" in Scotland  that I know have had Rotarys in and carried out work but I can\'t remember where now
Title: Scotland Tuners
Post by: leggysrx7 on September 15, 2011, 04:13:03 PM
Quote from: Mikey22;787684Anyone know any tuners in scotland that are able to do Apexi fc remaps?
 
Cheers

Former owner (of 2 FD\'s) I\'d use The Garage as mentioned for majority of the work. Marc (the owner) and a forum user Robertio mapped my first FD. I don\'t think Marc is in the position to do remaps, however best to phone up.

Based in Motherwell

Your best bet is to use Pip at WGT. Decent drive down, and I\'m almost certain an even better journey home:3gears-rh

Here\'s The Garage\'s number: 01698 265303

http://www.the-garage.co.uk/

Hope this helps

Leggy
Title: Scotland Tuners
Post by: YAU730 on September 24, 2011, 03:19:35 AM
Quote from: leggysrx7;788461Former owner (of 2 FD\'s) I\'d use The Garage as mentioned for majority of the work. Marc (the owner) and a forum user Robertio mapped my first FD. I don\'t think Marc is in the position to do remaps, however best to phone up.

Based in Motherwell

Your best bet is to use Pip at WGT. Decent drive down, and I\'m almost certain an even better journey home:3gears-rh

Here\'s The Garage\'s number: 01698 265303

http://www.the-garage.co.uk/

Hope this helps

Leggy
Was about to post this, I guess i can\'t trust anyone to touch a rotary up here due to not much experience, WGT is where i will be going, just waiting on PFC, ARC air filter box, HKS ssqv4 n sard 280l  fuel pump then am off to wgt to get it mapped....

P.S thou i would see u that day at Andy\'s...
Title: Scotland Tuners
Post by: RotorHeid on September 24, 2011, 08:12:48 AM
that\'s very true and well say. dude..;)
Title: Scotland Tuners
Post by: leggysrx7 on September 24, 2011, 04:11:06 PM
Quote from: YAU730;790180Was about to post this, I guess i can\'t trust anyone to touch a rotary up here due to not much experience, WGT is where i will be going, just waiting on PFC, ARC air filter box, HKS ssqv4 n sard 280l  fuel pump then am off to wgt to get it mapped....

P.S thou i would see u that day at Andy\'s...

Yeah, planned too, but my wee boy decided to fall from the top all the way down the stairs. 17months old and no fear. He\'s a bit crazy :)
Title: Scotland Tuners
Post by: YAU730 on September 25, 2011, 01:54:44 AM
Quote from: leggysrx7;790266Yeah, planned too, but my wee boy decided to fall from the top all the way down the stairs. 17months old and no fear. He\'s a bit crazy :)

OMG, sounds sore, hope everything is cool....
Title: Scotland Tuners
Post by: Aubec on September 25, 2011, 11:02:26 AM
FOr the cost of the fuel there and back, and the dyno session you could just buy a datalogit and an AFR guage and do it yourself :)
Title: Scotland Tuners
Post by: leggysrx7 on September 26, 2011, 10:09:29 PM
Quote from: Aubec;790397FOr the cost of the fuel there and back, and the dyno session you could just buy a datalogit and an AFR guage and do it yourself :)

It a skilled job and not worth the risk IMO. Lean it out and detonate the engine :censored:
Title: Scotland Tuners
Post by: YAU730 on September 27, 2011, 02:03:26 PM
Quote from: Aubec;790397FOr the cost of the fuel there and back, and the dyno session you could just buy a datalogit and an AFR guage and do it yourself :)


Not skilled to do that n don\'t have a clue about it, can see myself F-ing the map up tho and cosing it to blow hahaha...