Where and who does them.
I have found the extreme rotaries ones, but they are a bit extreme on price for a chunk of metal.
Makes me laugh how when they Put the words, billet and CNC\'d the price goes through the roof!
Pretty sure Keg at Billetbitz was looking at making one. Bear in mind you\'ll need an electric water pump, or idler pulley.
Quote from: SiH;778939Pretty sure Keg at Billetbitz was looking at making one. Bear in mind you\'ll need an electric water pump, or idler pulley.
Yes I i know that, electric water pump for sure.
you can hang it off of the airpump bracket on the stat housing, but then it\'s in the way of the turbo, so that\'s pointless :spank
Sure is. Lol. And my turbo isn\'t exactly small. BW S366
Im doing a good kit at the moment. Almost finished the drawings.
If you can wait...it will be worth it :) Plus we have good electric water pump housings :)
http://www.nzperformance.co.nz/store/rotary-engine-parts/cat_31.html
http://www.rotaryonline.com.au/products/side-mount-alt-bracket-inc-mount-hardware
Quote from: AtomicRex;778998Im doing a good kit at the moment. Almost finished the drawings.
If you can wait...it will be worth it :) Plus we have good electric water pump housings :)
which leccy pumps are you using? i\'ve seen some of the meziere ones flow something crazy like 200 l/h.
Indeed we are running the meziere pumps. 208litres per min :-). Bonkers hey!!
Grant im suprised after all the work your doing on the car, your not making one yourself!
Don\'t you loose the power-steering too with the relocation bracket ? Would be cool if somebody could design one keeping the power steering pump.
Shaun
Quote from: RobMatthews;779180Grant im suprised after all the work your doing on the car, your not making one yourself!
That could be a possibility, ant be that hard can it?
Check my thread dude, updated it just for you
Quote from: shaunwil;779181Don\'t you loose the power-steering too with the relocation bracket ? Would be cool if somebody could design one keeping the power steering pump.
Shaun
Rx4 doesn\'t have powersteering! Lol. Just a quick rack, 2.2 turns lock to lock
; )
Quote from: shaunwil;779181Don\'t you loose the power-steering too with the relocation bracket ? Would be cool if somebody could design one keeping the power steering pump.
Shaun
you will have to loose something, can remove the air con and place it there.
grant i am keeping an eye on the jons update but also did have a look for an hour this afternoon at placing the alternator where the air con would be and to be honest im nearly there with it just need to adjust it a bit more and tidy it up, and find a belt to fit. cost so far £0!
I did have the pineapple racing one but struggled to get it to work, it would loosen itself off !
Still have it somewhere in the garage.
Shaun
Quote from: RobMatthews;779204you will have to loose something, can remove the air con and place it there.
grant i am keeping an eye on the jons update but also did have a look for an hour this afternoon at placing the alternator where the air con would be and to be honest im nearly there with it just need to adjust it a bit more and tidy it up, and find a belt to fit. cost so far £0!
I did have a look at putting it there but the side rail in the engine bay is too close to the engine, the alternator is too big to get it in that position. Wondered if the PS pump could be moved down and the alternator put in its place ? Or even an electric PS pump instead.
Shaun
Quote from: shaunwil;779240Wondered if the PS pump could be moved down and the alternator put in its place ?
Shaun
i\'ve done this, pretty easy tbh. remove the aircon/ps bracket, cut it in half and drill a hole :Thumbs-up
Any pictures ???
Shaun
i\'ll try and take some when i get home
Cool :D
Shaun
Quote from: shaunwil;779445Cool :D
Shaun
Do you still have the pineappple side mount bracket?