Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: brundish24 on June 11, 2011, 03:16:13 PM

Title: help with missing pipe!
Post by: brundish24 on June 11, 2011, 03:16:13 PM
hi as title states need some help/ideas for a joining pipe between the elbow and intercooler. see pic. would prefer to buy one.
Title: help with missing pipe!
Post by: wolfie1 on June 11, 2011, 03:42:52 PM
try this place http://www.apmotorstore.co.uk/
Title: help with missing pipe!
Post by: philiwily on June 11, 2011, 07:00:16 PM
Greddy do the pipe from the elbow straight to the intercooler, doing away with your RE-AM pipe but they don\'t come up for sale much, I\'m not sure if you can still buy them new. Or get a 45* bend from the place above.

Phil
Title: help with missing pipe!
Post by: SiH on June 11, 2011, 07:26:55 PM
Just get a 30/45 degree silicon \'elbow\' with long legs, and position to suit the angle. :) Either that or weld a bit of pipe onto the elbow at the right angle.
Title: help with missing pipe!
Post by: brundish24 on June 12, 2011, 02:27:21 PM
Ok guys thanks for the help so a 45 degree would be ok then
Text only | Text with Images