Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: L18M on May 11, 2011, 10:41:06 PM

Title: stock oil press gauge not working :(
Post by: L18M on May 11, 2011, 10:41:06 PM
the dash has not be fondled so maybe loose connector some where?
where\'s the sender for the oil press?

cheers
Title: stock oil press gauge not working :(
Post by: antnicuk on May 11, 2011, 10:46:07 PM
its likely to be the sender,  it is on the passenger side just under the oil filter to the right/rear of the rear trailing (upper) spark plug, its a big brass round thing
Title: stock oil press gauge not working :(
Post by: L18M on May 12, 2011, 12:19:33 AM
cheers tony. will have a search tomorrow :Thumbs-up
The worst place it could possibly be! i Have too much stuff in that area :o
and a fat IC pipe in the way.
Title: stock oil press gauge not working :(
Post by: Lacey on May 12, 2011, 12:27:34 AM
Hammers fix everything :Laugh
Title: stock oil press gauge not working :(
Post by: L18M on May 12, 2011, 05:41:40 PM
Quote from: antnicuk;761965its likely to be the sender,  it is on the passenger side just under the oil filter to the right/rear of the rear trailing (upper) spark plug, its a big brass round thing

i had a poke around but no wires going to it and there no loose wires around it. only a green plug which i believe is for testing?
Title: stock oil press gauge not working :(
Post by: yiug412 on May 12, 2011, 09:03:45 PM
It should be a plug that has the similar shape to normal plug but one side is open to slot into the circular metal disc thing on top of the sender.