Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: Grant Monkhouse on April 06, 2011, 07:57:18 PM

Title: Tial wastegates
Post by: Grant Monkhouse on April 06, 2011, 07:57:18 PM
looking for some advice as for the best place to get a Tial 60mm vband wastegate?
Title: Tial wastegates
Post by: Nik da Greek on April 06, 2011, 08:55:14 PM
Ed :Thumbs-up
Title: Tial wastegates
Post by: PGiljevic on April 06, 2011, 09:58:46 PM
E-Bay? :Hammer
Title: Tial wastegates
Post by: Grant Monkhouse on April 06, 2011, 10:00:10 PM
Quote from: Nik da Greek;754441Ed :Thumbs-up

Cheers:Thumbs-up:Thumbs-up .....
Title: Tial wastegates
Post by: Grant Monkhouse on April 06, 2011, 10:00:55 PM
Quote from: RICE RACING;754457E-Bay? :Hammer

Too many fake copies going round these days but I will have a look, cheers
Title: Tial wastegates
Post by: Nik da Greek on April 06, 2011, 10:10:51 PM
Red ones are fastest :D

(http://i668.photobucket.com/albums/vv43/Nik_da_Greek/RX-7%20Finale/IMG_0599.jpg)
mmmmm :InLove
Title: Tial wastegates
Post by: Grant Monkhouse on April 06, 2011, 10:20:20 PM
Quote from: Nik da Greek;754465Red ones are fastest :D

(http://i668.photobucket.com/albums/vv43/Nik_da_Greek/RX-7%20Finale/IMG_0599.jpg)
mmmmm :InLove

Rx4 is blue so I will have to get a slower blue one.
Title: Tial wastegates
Post by: PGiljevic on April 06, 2011, 10:24:49 PM
When I get home at end of day I\'ll find a link off E-Bay where i buy my genuine Tial stuff for you and others and post it.

E-Bay FTW :Thumbsup!
Title: Tial wastegates
Post by: Grant Monkhouse on April 06, 2011, 10:26:05 PM
Quote from: RICE RACING;754474When I get home at end of day I\'ll find a link off E-Bay where i buy my genuine Tial stuff for you and others and post it.

E-Bay FTW :Thumbsup!

Cheers peter
Title: Tial wastegates
Post by: PGiljevic on April 08, 2011, 10:58:10 AM
http://stores.ebay.com.au/Import-Evolution/Tial-Wastegates-/_i.html?_fsub=4&_sid=80799507&_trksid=p4634.c0.m322

^ Grant, this is the place I have used a few times :Ladys-man
Title: Tial wastegates
Post by: 12at on April 08, 2011, 01:11:19 PM
ive got a spare new 38mm turbosmart if you interested.....
Title: Tial wastegates
Post by: Grant Monkhouse on April 08, 2011, 03:24:53 PM
Quote from: 12at;754928ive got a spare new 38mm turbosmart if you interested.....

Thanks but from what I understand anything below the 60 mm is too small. I would have to run 2 38mm.

It\'s for a bridge ported engine.
Title: Tial wastegates
Post by: 12at on April 08, 2011, 04:19:41 PM
bigger is not always best.
 
ive seen 600rwhp cars run a turbosmart 48mm or tial 44mm - i wouldnt think a 60mm would be necessary on your set up with the BW S300 turbo..
 
But if you want 60mm then dowit :)
Title: Tial wastegates
Post by: Grant Monkhouse on April 08, 2011, 04:30:24 PM
Quote from: 12at;754968bigger is not always best.
 
ive seen 600rwhp cars run a turbosmart 48mm or tial 44mm - i wouldnt think a 60mm would be necessary on your set up with the BW S300 turbo..
 
But if you want 60mm then dowit :)
also getting that size for future plans:burnout:Thumbs-up:Thumbs-up:burnout
 
GT42
Title: Tial wastegates
Post by: m1tch on April 10, 2011, 09:05:33 PM
I know someone who was running a Turbosmart 38mm on a bridgeport, he lost the engine due to boost creep, he was told that getting a better branded wastegate would make up for the slightly smaller outlet, didn\'t really work out!

I will be running one of these on my T88 - think its a 50mm - and its matched for T78/88 turbos :)

http://www.rhdjapan.com/trust-greddy-wastegate-valve-type-c-30955
Text only | Text with Images