Hello again. To make way for a garage filler (by May) i really need to make some room.
EMAIL me at kriskinealy@yahoo.co.uk (kriskinealy@yahoo.co.uk) or call / text 07932397436 :)
SET OF ENGINE PLATES NON PORTED * 3 =ONLY= £ 270.00
SET OF ENGINE PLATES NON PORTED * 3 =ONLY= £ 270.00
MSD 6AT INGINTION AMP BOXED TEST FITTED ONLY =ONLY= £ 180.00
NEW FRONT USA RB DISCS £200 PLUS PAID =ONLY= £ 160.00
TWIN POWER WITH HARNESS =ONLY= £ 150.00
ROTOR C WEIGHT =ONLY= £ 130.00
ROTOR B WEIGHT =ONLY= £ 130.00
WATER INJECTION SYSTEM =ONLY= £ 130.00
ECCENTRIC SHAFT =ONLY= £ 120.00
NEW REAR GROOVED AND PIMPLED DISCS £140.00 PAID =ONLY= £ 105.00
CITROEN SAXO PAS PUMP MOUNTED TO STOCK AC PLATE WITH HIGH PRESSURE LINE =ONLY= £ 100.00
NEW FRONT FERODO PADS 90.00 PAID =ONLY= £ 70.00
JASMA BACK BOX (CAT BACK) =ONLY= £ 70.00
C FIBRE GAUGE POD WITH BOOST AND WATER ETC BLACK =ONLY= £ 65.00
WATER INJECTION TANK =ONLY= £ 65.00
TIEN STRUT BRACE (GREEN) =ONLY= £ 60.00
STANDARD GAUGES AND SURROUND AND COVER (ALL WORKING) =ONLY= £ 60.00
STATIONARY GEARS SET OF WITH BEARINGS IN TOLERANCE =ONLY= £ 55.00
GEARBOX (WONT BUDGE NEEDS REPAIR =ONLY= £ 50.00
REAR SUBFRAME IN REALLY GOOD CONDITION POSTED =ONLY= £ 40.00
NGK 9S 10 OF (LOW MILEAGE EACH) =ONLY= £ 50.00
SMALL BASS BOX WITH " SUB =ONLY= £ 45.00
SECONDARY INJECTORS WITH RAIL (GOOD CONDITION) * =ONLY= £ 45.00
GREDDY OIL TEMP GAUGE WHITE =ONLY= £ 45.00
GREAT CONDITION PARCEL SHELF =ONLY= £ 45.00
DRIVERS SIDE WING VENT IN SILVER =ONLY= £ 40.00
LIM STANDARD =ONLY= £ 40.00
PAS PUMP =ONLY= £ 40.00
UIM STANDARD POLISHED AND MODDED FOR SINGLE TUB =ONLY= £ 40.00
SPOTLIGHTS STANDARD =ONLY= £ 35.00
OIL METERING PUMP (OMP =ONLY= £ 30.00
THROTTLE BODY =ONLY= £ 30.00
THROTTLE BODY =ONLY= £ 30.00
ULTRALIGHT NUTS BLACK NUTS, LOCKING NUTS (60 QUID NEW) =ONLY= £ 30.00
DASH CENTRE CONTROLS CENTRE =ONLY= £ 30.00
HANDBRAKE GEAR STICK PLASTICS =ONLY= £ 30.00
ENGINE FRONT COVER =ONLY= £ 25.00
LIGHT CLUSTER PASSENGER REAR SIDE =ONLY= £ 30.00
OMP LINES =ONLY= £ 30.00
STANDARD FLYWHEELS =ONLY= £ 30.00
STANDARD RADIATOR WITH FANS (GOOD) =ONLY= £ 35.00
GREDDY WATER GAUGE WHITE =ONLY= £ 30.00
BOOST MAP SENSOR =ONLY= £ 25.00
PILOT BEARING AND DUST COVER (BRAND NEW =ONLY= £ 25.00
LIM GASKET NEW =ONLY= £ 25.00
UIM GASKET NEW =ONLY= £ 25.00
CENTRE CONSOLE =ONLY= £ 25.00
STANDARD HEATER =ONLY= £ 23.00
PASSENGER SIDE POP UP LIGHT MOTOR =ONLY= £ 10.00
STANDARD BLOWER =ONLY= £ 22.00
UNDERTRAY =ONLY= £ 35
STANDARD ALCANTERA SEAT OR COLLECTED (FEW MARKS =ONLY= £ 20.00
DRIVE FRONT WING BLACK =ONLY= £ 20.00
PASS WING BLACK NEEDS REPAIR =ONLY= £ 20.00
AUTOMATIC FLYWHEEL =ONLY= £ 20.00
SUMPS EACH =ONLY= £ 20.00
REAR SUBFRAME =ONLY= £ 20.00
BOOT NO GLASS BLACK =ONLY= £ 20.00
FANS =ONLY= £ 15.00
KNOCK SENSOR =ONLY= £ 15.00
STANDARD MATS REAR =ONLY= £ 15.00
WATER FILLER NECK =ONLY= £ 15.00
STANDARD ELBOW =ONLY= £ 12.00
INTERIOR LIGHT =ONLY= £ 10.00
OIL COOLER COVER =ONLY= £ 10.00
BLACK FRONT BUMPER FOR REPAIR =ONLY= £ 10.00
SECONDARY INJECTOR RESISTORS FOR SINGLE TURBO =ONLY= £ 5.00
FLYWHEEL NUT =ONLY= £ 5.00
STOCK TWIN TURBO PIPES =ONLY= £ 5.00
FUSES AND RELAYS EACH =ONLY= £ 4.00
FD COMPATIBLE ROTOR BEARINGS 1 £35
FD COMPATIBLE ROTOR BEARINGS 2 £35
FD COMPATIBLE MAIN BEARING 1 (NO WINDOWS) £35
FD MAIN BEARING 1 (WITH WINDOWS) £35
PINEAPPLE RACING MEDIUM STREET PORT TEMPLATE £40
OPEN TO OFFERS
what kind of water injection system is it?
TO PAY AND QUERIES BEST EMAIL ME TO KEEP THE THREAD CLEAN, BETTER FOR PHOTOS ETC
DONT WANT TO GO INTO DETAIL HERE.
paypal kriskinealy@yahoo.co.uk (kriskinealy@yahoo.co.uk) as gift ( you pay fee )
leave your address,
phone number
JUST say what you have bought.
BEST THING IS TO EMAIL ME WE NEED TO SORT OUT POSTAGE, PHOTOS ETC
FIRST TO PAY GETS THE ITEM
ULTRALIGHT NUTS ALSO INCLUDE 4 LOCK NUTS WITH MAGNETIC KEYRING, 5 POUNDS POST ON THESE.
Hello, dibs on HKS Twin Power.
Can you send pics to dieghigno@hotmail.com, please?
How much shipped to Italy?
Thanks
you got a PM dude
Twinpower With Harness Is Sold
Tien brace and nuts sold....
sorry about the quality.
The pic bottom left i have wrapped the WI nozzle in electrical tape.
anyone lese before i organise postage tomorrow for pick ups Friday????
i also have a welder for sale brand new for 190 inc post ...cost me 250
Twin Power Sold
Harness Sold
Bearing With Windows Sold
Strut Brace Sold
Nuts Sold
Uim Sold
Rear Subframe Sold
Interior Plastics Sold
Water Injection Sold
Tank Sold
Searching for a Purge Control Solenoid Valve
(http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/167811_1871628556074_1401934333_2131190_7073176_n.jpg)
Do you have it? how much shipped to Italy?
Hi sorry to be a pain but could you send me a picture of the
BLACK FRONT BUMPER FOR REPAIR =ONLY= £ 10.00
also are you able to post this ???
AMBER yes i can post it the bumper is just lightly bumped. bare bumper in black. 25 inc post id say. Still interested?
i dont think i have the solenoid Kriss...
Some of the parts are now on ebay. The gauges etc
Just one last question about the bumper i know you said it bare however does it have the black splitter bit on the bottom If not do you have one ?
no it doesnt matey, just the bare bumper
Amber are you still in need of this bumper ?
Anyone else?
Do you need anything else to use the MSD ignition?
aaah ...., badly want that MSD but i\'m too poor :(
have you got an F100 relay in that lot?
The MSD ignition just splices into the stock loom. I fitted this into the loom and checked for a spark. there was one so all good.
sorry kris i dont have the purge control solenoid
b weight rotor sold
water temp gauge sold
front wings sold
strut brace sold
wheel nuts sold
c fibre pod sold
under tray sold
do you have this?
(http://i184.photobucket.com/albums/x54/motobruce100/Rx7/IMG00264-20110221-1834.jpg)
(http://i184.photobucket.com/albums/x54/motobruce100/Rx7/IMG00263-20110221-1834.jpg)
(http://i184.photobucket.com/albums/x54/motobruce100/Rx7/IMG00262-20110221-1834.jpg)
(http://i184.photobucket.com/albums/x54/motobruce100/Rx7/IMG00261-20110221-1834.jpg)
what is that.the heater matrix shell with the inards removed? i do have a heater matrix
Any photos for the exhaust ?
I guess the EPSP only fits on an FD or are the lines and brackets the same for the FC?
Its the shell for the aircon humidifyer (think thats right?) lives behind the glove box between the blower and rest of the heater larke.
pictues of the exhaust and other parts. i dont think i have that part mate. ill check saturday:King
What sort of condition are the sumps in mate? Got a picture? Also - how much for postage of one to Crewe?
35 posted mate they are ok. I have 3 of em
Hi mate you still got oil temp guage? Regards Ade
Yes I Have Mate, Im In Portugal At The Mo, Back Thursday
Hi pal,
Do you have the OMP for sale for the FD? Mines a 1994 R2 if it\'s compatible?
Cheers
Quote from: DR SCHNITZEL;738691TO PAY AND QUERIES BEST EMAIL ME TO KEEP THE THREAD CLEAN, BETTER FOR PHOTOS ETC
DONT WANT TO GO INTO DETAIL HERE.
paypal kriskinealy@yahoo.co.uk (kriskinealy@yahoo.co.uk) as gift ( you pay fee )
leave your address,
phone number
JUST say what you have bought.
BEST THING IS TO EMAIL ME WE NEED TO SORT OUT POSTAGE, PHOTOS ETC
FIRST TO PAY GETS THE ITEM
ULTRALIGHT NUTS ALSO INCLUDE 4 LOCK NUTS WITH MAGNETIC KEYRING, 5 POUNDS POST ON THESE.
Hi, do you still have the knock sensor?