Hi Guys,
My name is Keith. I\'ve been registered on this forum from \'08 and have been poping in and out since then.
Im from the Cayman Islands, and I\'ve been doing the rotary thing since 2001.
I\'ve just moved to the UK in October to study Engineering. I\'ve finally gotten some free time and would like to introduce myself.
I have a 2000 Single turbo rx7 with lots of goodies back home sitting down, waiting for me to return for summer vacation.
I can list what she has if you guys are interested.
here is a picture at the track:
(http://i268.photobucket.com/albums/jj5/caystang/Picture007.jpg)
-Keith
Welcome to post at MRC :)
hope u have a good time here, plz do post the spec of ur Car... Love to know wat she got
Syed
Welcome to MRC :wave. More pics of the FD please, looks nice :Thumbs-up
Great to see you have been coming here since 08 but even better to see you posting :D
Happy new Year and keep those pictures coming after all we set this club up as a world wide club, also now you are posting you can have a real Welcome, so Welcome :cool
Hopefully if your here for a while you can get to some events with us (see the opening page)
Thanks for the warm welcome guys. I\'m here for a few years , so I do plan on poking around a bit. lol. Im also down for the events. Im definetly looking at the japfest, but it all comes down to school with those out of town events. (york is dead with car action from what I\'ve seen so far)
Here is a list of some of the things done to my car so far:
Engine :
Aggressive street Port
New housings
Balanced
Race Clearance
Rx8 E shaft
stock size stud kit
*Essentially- Steve Kan Stage 3 Engine
Oil Pump Deleted
Air Pump Deleted
Induction:
Custom Long tube runner with twin v-band wastegate - Kantuning
Twin v-band 38mm wastegates:
Turbo was changed from PT76 to BW366 ET - Decided I wanted a circuit/drag car - best of both worlds
Tial 50mm BOV
Water to Air intercooler:
Heat exchanger:
GZ lower intake manifold
Ported and Matched upper, deleted secondary butterflies.
Greddy Elbow
Custom 3" intercooler Piping
Electronics:
Haltech Platinum 1000 - Short loom: Custom loom to ecu extension Extended loom
4x LS2 coils
Greddy Turbo Timer
Greddy Spec 2 boost controller
STRI 60mm Boost Gauge
STRI 60mm Water Temp Gauge
STRI 60mm Fuel Pressure Gauge
STRI 60mm Oil Pressure Gauge
Cooling
Koyo N Flow Radiator
REVOLUTION Radiator Outlet Tank
Drivetrain:
Super NOW Diff Bushing
Super NOW Engine mounts
Transmission Modification : Waiting for my lazy a$$ to get it modified
Kazz Diff
4:30 Gear - Stock
Diff Brace: T Brace.
Pending- PFS Rear Diff cradle. I\'ve been warned about the 4:30\'s that i have, tend to crack the housing while under excessive launching.
Fuel System:
2x850cc and 4x1680cc top feed injectors
Twin 290LPH Denzo Fuel Pumps
All steel Braided -6 feeding each rail from each pump
One return - 6 line
2x Aeromotive inline Filters with metal inserts
Aeromotive 1:1 Fuel Pressure Regulator
Might be moving to E85... Still on the table right now.
Suspension,Footwear & Brakes
Hawk Pads
GoodYear Braided Brake Lines
Tein MonoFlex Coilovers
QA1 Springs
Drag launch link kit upper and lower
Front Sway Bar deleted
Hurst Line Lock
18x8.5/18x9.5 FN01 Black Wheels- for street use
17x8/17x9 Advan Racing Wheels- for track use
Exhaust
Custom 3.5" Down Pipe - Heat Wrapped
Custom 3.5" Mid Pipe
JIC 90mm Racing Exhast
All Joints were converted to V-band
Wastegates are NOT plumbed into exhaust. lol
Body
Re-Amemiya Wing - Authentic
Feed Type II Front bumper - Authentic
Exterior Emergency cut off switch
Fresh Coat of paint - Original Colour- IBM
Pending : Twin Egt unit: not purchased yet. Still debating on brands
Roll Cage
Thats all that I can remember at this time. lol
The car is currently untuned as I didnt have enough time to have Steve Kan come and retune it for me. The motor is broken in, and Im hoping to have him back when I go back to cayman on vacation.
The car has gone through a ton of changes and I think this is the one I\'ve decided to leave it with.
Here is a pic of a earlier combination mock up: (this combo blew due to a faulty trigger signal)
(http://i268.photobucket.com/albums/jj5/caystang/IMG00109.jpg)
This is what ceramic seal carnage looks like. lol( I was running NRS ceramic seals. I do not have them in the new motor but will put them back in once I am happy with my setup. Those seals are awesome and I stand behind them)
(http://i268.photobucket.com/albums/jj5/caystang/Damage%20engine/IMG00086-20100529-1612.jpg)
New Engine and turbo Mock up a few months back:
(http://i268.photobucket.com/albums/jj5/caystang/Ci_roach%202010/IMG00121-20100712-1821.jpg)
The car makes positive pressure now by 3600-3800rpm untuned. Thats alot better than the 4500-5000 I was getting with the older turbo, however, anything after 5k was a blurr. lol
I know I wont get the top end grunt from the new turbo but it will be an overall quicker car if you get what Im saying.
Hope you like the build up guys! :3gears-rh
Hi Keith,
Nice car mate and very detailed info
I liked it...what sort of a power you are thinking to get out of it???
regards
syed
Thanks Syed. My aim is to max out between 550-600 whp. The limiting factor to my power goals with this combo is the turbo(which was deliberate). Everything else (engine,intercooler and fuel system) was setup up to be able to deliver 7-800+ whp if needed .
There are other things in my build that would and will need to change/upgrade too though.. axles, transmission etc.. Im on the edge of hurting these things while drag racing.
Quote from: clive;735001Great to see you have been coming here since 08 but even better to see you posting :D
Happy new Year and keep those pictures coming after all we set this club up as a world wide club, also now you are posting you can have a real Welcome, so Welcome :cool
Hopefully if your here for a while you can get to some events with us (see the opening page)
Clive, Im heading to the Autosport International show in Birmingham on the 15th-16th. This will be the first of many that I plan to visit :).
Wow nice CAR welcame :D
the limiting factor will be the uim for 600whp you\'ll get a massive power and torque drop
(http://i47.photobucket.com/albums/f170/mx1311/IMG_0609.jpg)
(thats flywheel, 599.9 whp on an s475 and pumpfuel)
welcome btw
my fiancee has been offered a job in the caymens and i\'d have went in tow, lived the life and took my rotary with me, she is still on the fence about taking it though
is it true they shut the airport to run drags?
Hey mx1311, thanks for the input.
That\'s pretty cool she has a job offer from cayman. I would do a little bit of research on Cayman as a lot of things are happening there.. good and bad.. Read up on some of the news... This is a good site to follow : http://www.caymannewsservice.com.
Make sure she\'s getting paid well as Cayman is quite expensive, especially now that duties and fuel costs went up again.
They don\'t close off the airport for drag and never did. lol. although there are one and two stories out there of people racing on it.
I honed out the uim intake and hopefully it will suffice. At the end of the day, we don\'t have a dyno, soooooo who knows what your making at the end of the day. lol
There is a 1/8 strip there that is so so and they do dexterity runs at another venue.