How can i test the igniter unit fd3s
Test the appropriate earths and lives to it. Then its easiest way is to put a used one on, however everytime ive treid and hoped it would be that, it never has been!
ive traced the wires from motec to igniter
pins outs
motec igniter
pin,33 = pin,6
pin,34 = pin,1
pin,35 = pin,3
inputs just before the igniter pin\'s 1, 3, 6 (cranking engine)
the wave form on pins 1 and 3 are almost same and pin 6 is just dubble the cycle of pin 1and 3 for the leading wasted spark system
ive not yet checked the output of the igniter