Guy\'s anyone know this 20B FD?
What is the none intercooler setup it\'s running?
http://www.youtube.com/watch?v=JRlvLHXdaIM
Cheers
Lee
It\'s got a PWR chargecooler but it belongs to Antnicuk\'s cousin or brother, he knows all about it.
that is what\'s known as a charge cooler matey.... basicaly a water coold air cooler! the only disadvantage to this system is you will have another rad at the front to cool the liquid in the charge cooler & a pump to flow the fluid around the system!
Jono
other problem with chargecoolers. well prob i had with one on an escort rsturbo many moons ago is after a long duration in the summer the charged water temp gets quite high and dont really cool much.
yep, its my cousins and as they say above, its got a charge cooler.
The car sounds fantastic, how does she drive? I seem to developed an unhealthy lust for 20b\'s lately :Ladys-man
Dave.
Thanks for the info guy\'s I have seen charge coolers before but not looking like that!
Anyway.. Anymore info on the car? Was it a DIy conversion? iIs there a build thread for it?
Cheers
Lee
yes, its a DIY build from scratch. Everything is custom made by my cousin with a little help from me. No build thread im afraid. She made 500 bhp at the rear wheels at 0.9 bar with a perfect flat torque curve from about 3500 rpm making the car feel so light. I would describe it as being between a V8 and a 13b. It still revs like a rotary but has some grunt off boost. The turbo is a smallish single for a 20B.
She has been a money pit and has had some gremlins but mainly because we had oil issues and the fact that it was super charged initially.
You\'ve done a great job there especially for a DIY set up!
Antnicuk, I would love to know more as I am starting my own similar build next year! Dam.. The cat is out of the bag! I have my donor car, running engine, ecu and I think all the running gear in a couple of options! Clearly a fair bit to fabricate which I will be doing myself too! Will rebuild the engine once I have it in and setup.
Funny you mentioned supercharger. I was only having this discussion on Sunday as to whether or not that had been done or could be done successfully? The fact you are back on a tubro I guess it didn\'t work out too well? What turbo did you end up goin with?? size etc? Does it run out of puff hi up? Also what injectors did you go for? I stil need to find a turbo, fuel pump and injectors although I have a fair idea what way I will go but always good to get other opinions/ideas!
Good power on mild boost by the way.. Not fancying pushing the boost up some more? Bet it is an animal in the wet if my 13B is anything to go by! What V8\'s you driven?! I guess the have more low down grunt rather than more power?
Is your cousin not on here by the way?
Cheers
Lee
Did you buy the FC 20B from Tim that was on Ebay? Good luck with the project, keep us posted, i hope you are wealthy!
The turbo is a bit of hybrid thats changed spec over time but its big, it has a T6 footprint but im not sure what the wheel sizes are, the exhaust a/r 0.96 but on a big turbine wheel. We dont think it will produce much more power or boost than it is but never really tried as its a road car and the gremlins knocked our confidence in the car a little, plus it destroyed a brand new FD gearbox with road use in less than a 1000 miles and even the twin plate clutch couldnt take the torque.
The injectors are 6 1000cc.
The supercharger did work but we had oiling issues and at the time we thought it may be because of the strain on the front pulley so went turbo route. It turned out it wasnt the supercharger at all but you live and learn.
The power was very linear which meant traction was pretty good for the power, much better than the 13b with equivalent power.
V8\'s we have are mainly BMW and Merc.
My cousin is on here but doesn\'t post much.
What route would you now take to overcome the gearbox and clutch issues? Sounds damn expensive to keep mashing them even before you need an oil change :2Confused
I really fancied a project like this but it looks to be a bit technical / expensive so i\'ll maybe try something else now!
Thanks for the info Antnicuk.
Yes I did get the car off Tim! Running sweet enough but will rebuild it as it\'s been sat for so long it\'s not worth the risk. Bound to blow a seal or something and I am sure the plates will have some corrosion and need a skim. Hopefully all salvagable though.
I wouldn\'t say I am rich no! So hopefully it goes more to plan! I am hoping I have covered the main expense with the Engine ECU and Car. I have 2 FD boxes and a turboII box I might go for. A twin plate clutch for each option. The main other costs would be the fabbing but as I aim to do it all myself then I can hopefully keep that down. Hope I do not sart popping boxes though! Did you guy\'s rebuild your own engine or get it done elsewhere?
I plan to do that myself as well otherwise again it\'s quite a big expense. I do not envisage the project being complete in 2011!
Cheers
Lee
Quote from: rx-dave;732818What route would you now take to overcome the gearbox and clutch issues? Sounds damn expensive to keep mashing them even before you need an oil change :2Confused
I really fancied a project like this but it looks to be a bit technical / expensive so i\'ll maybe try something else now!
It\'s better to get a range of views.
There are many factors to put into play, such as the way the car is used, ie hard launches will obviously put strain on boxes and clutches.
Also the way a clutch is put in can have a big factor to whether it functions correctly.
This is easily the best project you can do.
I wish I could.
V8s sound boring, lazy and just plain awful when put in a rex
Haa haaa!!
Having heard the 20B fire up I think sort of a 26B it is the best sounding engine out there! I am quite a sucker for a nice straight 6 or meaty V8 too! But compared to this 20B wins! A real monster V8 does sound good though! like this for instance!
http://www.youtube.com/watch?v=DO69p7IkcHc
Ohhh , I think I have just thought of a new project.. maybe for 2013! I already have another planned for wen I complete the 20B!
I do fancy doing a V8 FD. But it would be for my dad really.. Might shelve that idea and make room for a different option! Too many projects to try and do and too little time. I really must quit the day job!
Lee
Will you be selling the 20b? A good mate of mine is about to get an V8 conversion done on his already well sorted RZ so that\'ll be an interesting one to watch unfold :Thumbs-up
Dave.
Just want to drop one line, if u drove 20b once, I bet V8 wud look a waste of time. The drive of 20b is amazing and sound is unbelievable.... Since I own one, I trust me the fun is incomparable...
Regards Syed
Cheers Mir.. I don\'t doubt!!
If you were asking me Dave.. Then yes when the 20B is done it will be for sale some time after to make way for the next project. not going to be for a couple of years yet though I imagine!
Lee
In a perfect enviroment i\'d now like one of each.......then i\'d be a happy man!! :Thumbs-up
Dave.
Great news to hear that you are doing another FD based project Lee.
Your last one was a stunner and deservedly won that Hampshire JCC award last summer.
Hopefully you will also be doing another build blog on your website.