Print Page - Microtech Tuning timing???help

Title: Microtech Tuning timing???help
Post by: sitorx7 on June 26, 2010, 07:14:42 PM

Hi everybody i have a FC3S running with 10 alcohol 1600cc injectors, with 4 marks racing beat pulley...etc

When its on idle i saw in the microtech LTX12s, Gauge degree 10BTCD and i confirmed with my timing...I lock the timing and set on 0TDC...etc
when try to turn the engine in idle do not want to start, but if move the CAS to 10BTCD turn ON fast...any HELP please???

Do i have a problem if set my car to 10BTCD??

Title: Microtech Tuning timing???help
Post by: gillard28 on June 26, 2010, 11:52:49 PM

Can you move the dizzy on your motor ? it could be set in the wrong possition

Title: Microtech Tuning timing???help
Post by: pdtaylor18 on June 28, 2010, 09:16:29 PM

I have always been told regardless of tuning to set the timing to mazda standard as per the workshop manual for Trailing and Leading, you can then alter the maps to suit your setup within the software.

Title: Microtech Tuning timing???help
Post by: gillard28 on July 03, 2010, 10:28:54 AM

Are u tuning alch or petrol in this ??

Title: Microtech Tuning timing???help
Post by: up&coming on August 04, 2010, 10:24:33 PM

if you look up rx72c on here or rx7club.com he mite hav a map that can get your started out. i worked with him on a map and is was spot on to get me going..

Mazda Rotary Club

General => General Technical => Technical Stickies => Topic started by: sitorx7 on June 26, 2010, 07:14:42 PM