Hi guys
just a quick question about the above product.
Has anyone installed these? If so have you noticed any improvement in starting the car/general running etc.
Also there\'s 2 versions available 8bit 16bit, what is the difference?
Cheers
I got some from MRP, made a HUGE difference as the OEM leads are consumable items, I would defiantly recommend getting a set as the OEM leads are past it by now, you might be amazed at the difference :)
8bit are for UK, 16bit Import, they are almost identical but the 8bit but have a straight cap where it connects to the coils. I have the 16bit KV85\'s, replaced OEM leads as mine where slightly past it. As mitch said your leads probably are to if there the OEM\'s and you might be amazed!
I got mine from here
http://www.rotaryart.co.uk/acatalog/Magnecor_ignition_leads_for_Mazda_RX7_FD.html#a40287
Great Stuff guys
Ordering a set now, hopefully i can reap the rewards of these magical leads :wiggle
doesnt the 8/16bit correspond to the year of the ecu at all?
what year is your car jayra?
resurrection :Laugh
I want to change my spark plug wires, one is broken:Hammer
I am a little confused, my car is 95 Import from Japan.
I currently have these
Magnecor 10mm leads 8bit UK
(http://www.rotaryart.co.uk/acatalog/45287-200.jpg)
T1 = 22cm, T2 = 28cm
L1 = 28cm, L2 = 33cm
I can buy these?
Magnecor 10mm leads 16bit Import
(http://www.rotaryart.co.uk/acatalog/45290-200.jpg)
T1 = 23cm, T2 = 29cm
L1 = 31cm, L2 = 35cm
What do you think? I have problems to install given the differences?
I\'m going crazy, I do not know what to buy:Hammer
Buy from Mazda Rotary Parts
http://www.mazdarotaryparts.com/brx-7-fd-magnecor-ignition-leads---45290-kv85b-784-p.asp
thx mithc, but i want the same R100 10mm I currently mounted on my FD :Tongue1
The ones you have found will be fine.
but really I found them both here :Tongue1
http://www.rotaryart.co.uk/acatalog/...FD.html#a40287 (http://www.rotaryart.co.uk/acatalog/Magnecor_ignition_leads_for_Mazda_RX7_FD.html#a40287)
I just do not know to take 8bit or 16bit :Laugh
think it\'s the same thing for the installation? :confused:
I have just received my set of kv85 magnecor leads today so look forward to see if it makes a difference along with changing the plugs fuel filter oil and oil filter, will be like a new car again :-)
Get the set of leads that match your exhisting ones.
it will certainly :Thumbsup!
why not put a photo of your KV85? :mmmm
Quote from: Grant Monkhouse;784414Get the set of leads that match your exhisting ones.
I think I\'ll do that.
I wish there was not a mistake earlier, since mine is an import of japan :2Rolleyes
My kv85 look exactly the same as your second picture :cool
Quote from: gonzodave;784421My kv85 look exactly the same as your second picture :cool
:eek: my seem too short to tell the truth, I will risk it will take 16 bits.
if they are not going well sell it on the forum ahhahaah :spank
I have just measured mine, if your measurments are from center of plugs then mine are the same. They are the 16bit import set which i got from mazda rotary parts.
thx gonzo :D
ahhaha, I do not want to think of the work I have done to change 4 wires:Hammer
OMG :(
(http://www.fd3s.net/spark_plug03.jpg)
(http://www.fd3s.net/spark_plug04.jpg)
(http://www.fd3s.net/spark_plug05.jpg)
(http://www.fd3s.net/spark_plug06.jpg)
(http://www.fd3s.net/spark_plug08.jpg)
I want to die :Hammer
I have to find another solution, I will try with pliers after I disassembled the elbow :rollin
I am yet to do mine as they only arrived today, so i have all this fun to come :-)
Hehehe
you will do the work alone?:guinness
Yep as long as my oil turns up tommorrow i will be changing plugs leads fuel filter and oil + filter saturday morning, never know some mates might turn up to watch me work ha ha
maintenance kit arrived in only 4 days from uk.
:Thumbsup!
(http://www.pctunerup.com/up/results/_201108/20110829140353_323490_10150257650657014_517067013_7554812_5680919_o.jpg)
:InLove:3gears-lh
I am about to order some Magnecor ignition leads, especialy 10mm, but i dont know if i could go with 8 bit or 16 bit ones..you see i have a 93 european fd3s rx7, but the engine, engine harness, under dash harness and ecu (apexi power fc) are of a late spec, 2000 model, so??
also, what is the difference between R-100 and KV85?
thanks in advance!
George