A slide show of my project from 2006 to 2010 sorry some pic,s are a little out of focus its about four to five minutes long, many of you will have seen these befor but just to say thanks for all the ones that helped me with the project:god
(http://i373.photobucket.com/albums/oo171/t200cad/th_RX82010022.gif) (http://s373.photobucket.com/albums/oo171/t200cad/a%20little%20bump/?action=view¤t=a1a4dc44.pbw) just click the skull
and members advise and support good or bad constructive criticism it all helps with the end product thanks again tony c :WaveBye:WaveBye
Thats one sexy rex!:Ladys-man:Ladys-man
Excellent complete package - I\'ve seen it a few times at shows - and there\'s always something new to spot on it - such attention to detail.
Really shows what can be done with some time, money and vision. :Thumbs-up
very nice looking good :Thumbsup!
at japfest i was walking along with my little girl who is 2 and she seen a rx8 with lambo doors and she said "daddy the doors are broken" :Giggle
Of course if you owned such a beast today, she\'d have to have a 26B fitted :-)
nice job Tony!
where did you get all your orange silicone hose from? it looks like good quality im after some in red? the stuff ive got goes all soft with the heat, its naff, only need it for PCV lines ect
the hose is from viper performance thay will mix you any color you want:)
Cheers Tony! off the top of your head do you know what size hoses the PCV lines are? mainly the ones that go to the intake, i think they have an ID of 10mm?
Also there is a line which runs from the power brake unit, to the intake manifold, do this have to be reinforced? as it sucks quite a bit, and thin tube just buckles under the vacum.
I have put a catch tank in today, and tube supplied has a big ID and too big to go onto the breather and intake, and like said above the tube i have goes soft when hot (its better quality than supplied though)
vin
viper hoses hope this helps
Quote from: VelocityVinnie;695999Cheers Tony! off the top of your head do you know what size hoses the PCV lines are? mainly the ones that go to the intake, i think they have an ID of 10mm? t,c answer yes i used 10 mm
Also there is a line which runs from the power brake unit , to the intake manifold, do this have to be reinforced? as it sucks quite a bit, and thin tube just buckles under the vacum t.c answer well the hose i used from viper for the last 3 years is not reinforced but the hose has quite a thick wall to it
I have put a catch tank in today, and tube supplied has a big ID and too big to go onto the breather and intake, and like said above the tube i have goes soft when hot (its better quality than supplied though) t,c answer, the viper hose would be good enough for this but my catch tank fittings are 8mm
vin
cheers Tony your a legend! ill order some 10mm and see how i get on!