Print Page - Does anyone know the thread size of the Stock Turbo II Oil cooler line Banjo\'s?

Title: Does anyone know the thread size of the Stock Turbo II Oil cooler line Banjo\'s?
Post by: antnicuk on May 19, 2010, 10:56:27 PM

I want to make up a set of oil cooler lines as I want to fit a second cooler. All the fittings i can find are screw in male or female with a push on tail, i cant find any banjos\'

Does anyone know what size fitting i would need to replace the stock mazda banjo with a screw in fitting?

Title: Does anyone know the thread size of the Stock Turbo II Oil cooler line Banjo\'s?
Post by: m1tch on May 20, 2010, 07:31:54 AM

Prof will know, he has refitted basically all the OEM Mazda fittings with AN fittings :D

Title: Does anyone know the thread size of the Stock Turbo II Oil cooler line Banjo\'s?
Post by: Prof on May 20, 2010, 08:29:38 AM

Hi Tony,

Have a search for Bish and his oil cooler lines.

From memory the rear iron and the oil cooler\'s are M18x1.5 and the front housing one is M16x1.5

I copied bish\'s arrangement going from Metric to AN10 with adatpors (3 x 90 degree AN hose ends, and a 45 degree for the front cover.

Title: Does anyone know the thread size of the Stock Turbo II Oil cooler line Banjo\'s?
Post by: Prof on May 20, 2010, 08:41:40 AM

Here you go:

http://www.mazdarotaryclub.com/forums/showthread.php?t=55291

Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: antnicuk on May 19, 2010, 10:56:27 PM