Hi wonder if any one can help, I recently brought rx7 in auto as it was very cheap. I now want to convert to manual I have everything to do it and while I\'m there it will change the engine to one I have. Just bit confused on engine loom I was told by tunners I can use auto loom and ecu. What I will have to do is join wire at the gear box and join the two thick ones together. Has any one does this that can give me any advice???
Very easy and best to continue to use the Auto loom...
I guess you are going for like for like with the standard sequential system and all the sh!te associated with it... good luck!
Yes will be running standerd turbo set up untill I get apexi PFC. Thanks for the help
You do need a \'manual\' ECU though..
The way you are doing it by keeping all the waste Mazda included on the Engine I believe has a few additional \'different\' bits you need to get the wiring sorted for.
Unfortunatly I cannot help with that as I believe it should all be in a bin!
But good luck
So what do you mean the rats nest? So how would you do it?
If staying with the twins I would do away with the sequential set up and also all the emmissions kak.... It simplyfies the Engine and components, creates a bit more cooling area around the Engine and a far less chance of silly things failing or go wrong on you!
It\'s a sports car after all... :bandit
You can convert this
(http://thumbnails6.imagebam.com/6964/ff87f669632865.gif) (http://www.imagebam.com/image/ff87f669632865/)
To this
(http://thumbnails26.imagebam.com/6964/018f0269632888.gif) (http://www.imagebam.com/image/018f0269632888/)
definitely worth doing imo, you can also lose solenoids I & J if you fit a boost controller.
if u gonna do simplified seq, remember it only works with a power fc. itll throw error codes on standard ecu
Ok thanks for the help I\'ve got a hks full exhaust going on as well so that will remove air compressor but will have to wait untill I get a apexi PFC were is the best place to get one?
disconnecting and removing airpump wont throw any codes
I\'ve been told I can\'t put exhaust on untill I have it mapped so will have to wait for apexi PFC
bacbox is ok on standrd ecu as long as u still got the cat in place.