Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: JamietypeR on February 15, 2010, 06:34:12 PM

Title: Washer problem
Post by: JamietypeR on February 15, 2010, 06:34:12 PM
Hi guys my front washers dnt squirt out water anymore and was wondering if there\'s a simple fix? Cheers
Title: Washer problem
Post by: SiH on February 15, 2010, 06:37:34 PM
Does the motor whirr when you squirt them?

If not, pop the plug off, and stick a multimeter across the plug terminals, then see if you get 12v when you move the stalk to \'squirt\'.
Title: Washer problem
Post by: JamietypeR on February 15, 2010, 06:41:28 PM
Yea I think it does but just nothing comes out
Title: Washer problem
Post by: MaLicE on February 15, 2010, 06:45:32 PM
sure its not frozen up? the nozzles might be clogged, if you get a noise when you try and squirt i would say frozen or blocked, squeeze your way along the hoses will find a blockage if you have one.
Title: Washer problem
Post by: JamietypeR on February 16, 2010, 07:50:48 AM
Yea it\'s not frozen it\'s been like this for a while now just not getting anything coming out apart from a little dribble from one of them, I\'ll try n see if there\'s a blockage or something when I get home
Title: Washer problem
Post by: FD3S Efini on February 17, 2010, 10:53:52 AM
have you tried using pins in the holes to clear them? same sorta thing happened when i first got my car
 
Kris
Title: Washer problem
Post by: JamietypeR on February 17, 2010, 12:16:08 PM
Ok cool will try that n see way happens
Title: Washer problem
Post by: FD3S Efini on February 21, 2010, 11:58:13 PM
did this work mate?
 
Kris
Title: Washer problem
Post by: JamietypeR on February 22, 2010, 07:43:49 AM
Kind of think they must be blocked as I got a pin an pushed it thru the wholes on the washers n it now squrts abit out just not alot so just gonna keep trying that till it\'s fully wrking, was doing it in the dark so I\'ll try again in the daylight, cheers guys