Sice buying the RX I have not been happy with the location of the fuel pressure regulator.
It was left hanging in the space between the bulkhead and UIM. I fastened it to the brake pipes with tie wraps !! (I know not the best thing to do).
(Picture of current location attached.)
Now I am ready to relocate it, but where to ?
Is it best located as near to the injectors as possible ?
I understand its a pressurised fuel system, but can the regulator be mounted below the injector height anywhere in the engine bay ?
Can it be located in any plane, (ie with the gauge face pointing upwards) ?
Any advice appreciated.
Thanks
Chris
Mines mounted on a bracket attached to the bulkhead in between the elbow and abs unit hth
Quote from: lee mills;669560Mines mounted on a bracket attached to the bulkhead in between the elbow and abs unit hth
Thanks Lee.
Now I have space without the ABS unit, I planned to locate it on a bracket off the bulkhead. Sounds like it will be in a similar location to yours.
Or you could mount it in front of the engine if you have a lot of fuel rails and have no space either side of the engine :rollin
(http://i93.photobucket.com/albums/l49/m1tch_2006/QSRE4626B1.jpg)